HH-1199-6D This filter was designed especially for power supply modules with power factor correction. This filter works well on systems with requirements to meet the European EN55022 emissions specification or for systems required to meet the FCC conducted emissions standards. Operating Voltage: 125 / 250 v~ Operating Current (Max): 6.0 AMP Frequency: 50/60 Hz Temperature Range (Storage): -40 to 85C Temperature Range (Operating): -40 TO 50C Diel. Withstanding Voltage (Line—case): 1500 Vac Diel. Withstanding Voltage (line—Line): 1500 Vdc Leakage Current @250 Vac, 60 Hz: 2.5 ma Max. Residual Voltage after 1.0 sec: 34 V Max. Order p/n: HH-1199-6D Note: This filter has a reduced height of 0.7 inch for tight fitting applications. The pin height is also 0.19 inch. USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 EUR JMK Inc Glasgow G13 1DN Scotland UK PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884