UNIVERSAL DEMULTIPLEXER/ DECODER Micrel, Inc. FEATURES SY100S370 SY100S370 DESCRIPTION ■ Max. propagation delay of 1200ps ■ IEE min. of –92mA ■ Industry standard 100K ECL levels ■ Extended supply voltage option: VEE = –4.2V to –5.5V ■ Voltage and temperature compensation for improved noise immunity ■ Internal 75kΩ input pull-down resistors ■ 60% faster than National or Signetics ■ Approximately 40% lower power than Fairchild ■ Function and pinout compatible with Fairchild F100K ■ Available in 28-pin PLCC packages The SY100S370 is a universal demultiplexer/decoder that can be used as either a dual 1-of-4 decoder or as a single 1-of-8 decoder and is designed for use in highperformance ECL systems. The Mode control (M) input determines the function. In the dual 1-of-4 mode, each 4input group has a pair of active-LOW Enable (E) inputs. The Enable pins are assigned such that in the single 1-of8 mode they can be tied together in pairs to result in two active-LOW Enable inputs. E1a will be tied to E1b and E2a to E2b. The auxiliary inputs (Hn) are used to determine whether the outputs are active-HIGH or active-LOW. The address inputs for the dual 1-of-4 mode are A0a, A1a, A0b. A2a is unused. In the 1-of-8 mode, the address inputs are A0a, A1a, A2a. The inputs on the device have 75kΩ pull-down resistors. PIN NAMES Pin Function Ana, Anb Address Inputs (n = 0,1,2) Ena, Enb Enable Inputs (n = 1,2) M Mode Control Input Ha Z0 – Z3 (Z0a – Z3a) Polarity Select Input Hb Z4 – Z7 (Z0b – Z3b) Polarity Select Input Hc Common Polarity Select Input Z0 – Z7 Single 1-of-8 Data Outputs Zna, Znb Dual 1-of-4 Data Outputs (n = 1...4) VEES VEE Substrate VCCA VCCO for ECL Outputs M9999-042307 [email protected] or (408) 955-1690 1 Rev.: I Amendment: /0 Issue Date: April 2007 SY100S370 Micrel, Inc. Z1a (Z1) Z2a (Z2) A0a M A1a VEES A2a PACKAGE/ORDERING INFORMATION Ordering Information 11 10 9 8 7 6 5 E1a E1b VEE 12 13 14 15 16 17 18 VEES E2b E2a Ha 4 3 2 1 28 27 26 Top View PLCC J28-1 Z0a (Z0) Z3a (Z3) VCCA VCC VCC Z1b (Z5) Z2b (Z6) Part Number Package Type Operating Range Package Marking Lead Finish SY100S370JC J28-1 Commercial SY100S370JC Sn-Pb SY100S370JCTR(1) J28-1 Commercial SY100S370JC Sn-Pb SY100S370JZ(2) J28-1 Commercial SY100S370JZ with Pb-Free bar-line indicator Matte-Sn SY100S370JZTR(1, 2) J28-1 Commercial SY100S370JZ with Pb-Free bar-line indicator Matte-Sn 19 20 21 22 23 24 25 A1b Z3b (Z7) Z0b (Z4) VEES Hb A0b Hc Notes: 1. Tape and Reel. 2. Pb-Free package is recommended for new designs. 28-Pin PLCC (J28-1) TRUTH TABLES(1) Dual 1-of-4 Mode (M = A2a = Hc = LOW) Active HIGH Outputs (Ha and Hb Inputs HIGH) Inputs Active LOW Outputs (Ha and Hb Inputs LOW) E1a,E1b E2a,E2b A1a,A1b A0a,A0b Z0a,Z0b Z1a,Z1b Z2a,Z2b Z3a,Z3b Z0a,Z0b Z1a,Z1b Z2a,Z2b Z3a,Z3b H X L L X H L L X X L L X X L H L L H L L L L H L L L L L L L L H H L H H H H L H H H H H H H H L L L L H H L H L L L L H L L H H H H H L H H L Single 1-of-8 Mode (M = HIGH; A0b = A1b = Ha = Hb = LOW) Inputs Active HIGH Outputs* (Hc Input HIGH) E1 E2 A2a A1a A0a Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z7 H X X H X X X X X X L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L H H L H L H H L L L L H L L L L H L L L L H L L L L L L L L L L L L L L L L L L L L L L L L H H H H L L H H L H L H L L L L L L L L L L L L L L L L H L L L L H L L L L H L L L L H Note: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care * for Hc = LOW, output states are complemented E1 = E1a and E1b wired; E2 = E2a and E2b wired M9999-042307 [email protected] or (408) 955-1690 2 SY100S370 Micrel, Inc. BLOCK DIAGRAM A0a Z2a (Z2) A1a Z0a (Z0) E1a E2a Z1a (Z1) A2a M Z3a (Z3) Z2b (Z6) A0b Z0b (Z4) Z1b (Z5) Z3b (Z7) A1b E1b E2b Ha Hc Hb M9999-042307 [email protected] or (408) 955-1690 3 SY100S370 Micrel, Inc. DC ELECTRICAL CHARACTERISTICS VEE = –4.2V to –5.5V unless otherwise specified; VCC = VCCA = GND Symbol IIH IEE Parameter Min. Input HIGH Current Hc, A0a, A1a, A2a All Others Power Supply Current Typ. Max. — — — — 310 250 –92 –73 –46 Unit Condition µA VIN = VIH (Max.) mA Inputs Open AC ELECTRICAL CHARACTERISTICS VEE = –4.2V to –5.5V unless otherwise specified; VCC = VCCA = GND TA = 0°C Symbol Parameter TA = +25°C TA = +85°C Min. Max. Min. Max. Min. Max. Unit tPLH tPHL Propagation Delay Ena, Enb to Output 300 1200 300 1200 300 1200 ps tPLH tPHL Propagation Delay Ana, Anb to Output 500 1500 500 1500 500 1500 ps tPLH tPHL Propagation Delay Ha, Hb, Hc to Output 500 1500 500 1500 500 1500 ps tPLH tPHL Propagation Delay M to Output 600 2100 600 2100 600 2100 ps tTLH tTHL Transition Time 20% to 80%, 80% to 20% 300 900 300 900 300 900 ps TIMING DIAGRAM 0.7 ± 0.1 ns 0.7 ± 0.1 ns –0.95V INPUT 80% 50% 20% –1.69V tPHL tPLH 80% 50% 20% OUTPUT tTLH tTHL Propagation Delay and Transition Times Note: VEE = –4.2V to –5.5V unless otherwise specified; VCC = VCCA = GND M9999-042307 [email protected] or (408) 955-1690 4 Condition SY100S370 Micrel, Inc. 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-042307 [email protected] or (408) 955-1690 5