DC-AC INVERTER UNIT PS-DA0408-092-B(S) (18 W QUAD OUTPUTS) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile DC to AC Inverter is developed for quad lamps. Optimized and for Sharp: LQ150X1LGB1 APPLICABLE LCD: 15 to 19 inches quad lamp type Lamp Voltage 625 Vrms Lamp Current 4 x 6 mArms Lamp Start Up Voltage 1.800 Vrms (Vin : 12 Vdc) FEATURES : Remote ON/OFF Independent Open Lamp Detection for each side Current balance circuit Dimming Function RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH 0°C ~ +60°C -20°C ~ +85°C 95 %RH max 160 x 26 x 12.6 mm Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 ~ CN5 Qty. 1 1 4 Material UL94V-0 (FR-4 or CEM-3) 53261-1290 SM02B-BHSS-1-TB Unit : mm Weight :45 (g) typ. Note t=1m m Molex or equal JST or equal Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0.2, 22th October 2007 DC-AC INVERTER UNIT PS-DA0408-092-B(S) (18 W QUAD OUTPUTS) (PRELIMINARY INFORMATION) Output side CN2 ~ CN5 Input side CN1: Pin No. CN 1-1;3;5;6;8;9 CN 1-2 Symbols GND Vbr CN 1-4 Vrm t CN 1-7 CN 1-10;11;12 N.C. Vin Pin No. CN 2-1 CN 2-2 Ratings 0 ~ 5.0 Vdc 0 ~ 0.5 = OFF / 3.3 ~ Vin = ON Symbols Vhigh Vlow Ratings 625 Vrm s (6.0 m Arm s ) (GND) 10.8 ~ 13.2 Vdc ELECTRICAL CHARACTERISTICS : Conditions Parameters Symbols Output Current Output Current Input Current Frequency Open Circuit Voltage Iout Iout Iin F Vopen Note 1 : Vin (V) 12±1.2 12±0.6 12±1.2 12±1.2 11.4 Specification Vbr (V) Tu (°C) 0 5 0 0 0 0 0 0 0 0 ~ +60 ~ +60 ~ +60 ~ +60 ~ +60 Min. Typ. Max. 5.5 45 1.600 6.0 26 1.46 50 1.800 6.5 1.89 55 2.300 Unit Note m Arm s % Adc kHz Vrm s mo st b rig ht ness Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. TEST CIRCUIT : SW 1 Operation of unit a Operation b Non operation Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0.2, 22th October 2007