2N3501DCSM DUAL BIPOLAR NPN DEVICES IN A HERMETICALLY SEALED LCC2 CERAMIC SURFACE MOUNT PACKAGE FOR HIGH RELIABILITY APPLICATIONS MECHANICAL DATA Dimensions in mm (inches) FEATURES 2.54 ± 0.13 (0.10 ± 0.005) 1 4 A 6 0.23 rad. (0.009) 5 6.22 ± 0.13 (0.245 ± 0.005) A = 1.27 ± 0.13 (0.05 ± 0.005) LCC2 (MO-041BB) PIN OUT Pin 1 – Collector 1 Pin 2 – Base 1 Pin 3 – Base 2 • SILICON PLANAR EPITAXIAL NPN TRANSISTOR 4.32 ± 0.13 (0.170 ± 0.005) 3 2 1.40 ± 0.15 (0.055 ± 0.006) 1.65 ± 0.13 (0.065 ± 0.005) 0.64 ± 0.06 (0.025 ± 0.003) 2.29 ± 0.20 (0.09 ± 0.008) • HERMETIC CERAMIC SURFACE MOUNT PACKAGE • CECC SCREENING OPTIONS • SPACE QUALITY LEVELS OPTIONS • JAN LEVEL SCREENING OPTIONS • HIGH VOLTAGE Pin 4 – Collector 2 Pin 5 – Emitter 2 Pin 6 – Emitter 1 All Semelab hermetically sealed products can be processed in accordance with the requirements of BS, CECC and JAN, JANTX, JANTXV and JANS specifications. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC PD Continuous Collector Current Power Dissipation Tj Tstg RthJA Operating Temperature Range Storage Temperature Range Thermal Resistance Junction to Ambient Collector-Base Voltage Collector-Emitter Voltage(IB=0) Emitter-Base Voltage(IB=0) Tamb = 25°C Derate above 25°C Single Side Total Device 150V 150V 6V 300mA 300mW 500mW 1.72mW/°C 2.86mW/°C -65 to 200°C -65 to 200°C 350°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 4059 Issue 1 2N3501DCSM ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit OFF CHARACTERISTICS 1 V(BR)CEO Collector-Emitter Breakdown Voltage IC=10mA IB=0 150 V V(BR)CBO Collector-Base Breakdown Voltage IC=10µA IE=0 150 V V(BR)EBO Emitter-Base Breakdown Voltage IE=10µA IC=0 6 V ICBO Collector Cutoff Current VCB=75V IE=0 0.05 Tamb=150°C IEBO Emitter Cutoff Current 50 VBE(off)=4V VCE=0 IC=0.1mA VCE=10V 35 IC=1mA VCE=10V 50 IC=10 mA VCE=10V 75 IC=150 mA VCE=10V 100 IC=300 mA VCE=10V 20 IC=10mA IB=1mA 0.2 IC=50mA IB=5mA 0.25 IC=150 mA IB=15mA 0.4 IC=10mA IB=1mA 0.8 IC=50mA IB=5mA 0.9 IC=150 mA IB=15mA 1.2 25 µA nA ON CHARACTERISTICS hFE VCE(SAT) VBE(SAT) DC Current Gain 1 Collector-Emitter Saturation Voltage 1 Base-Emitter Saturation Voltage 300 V V SMALL SIGNAL CHARACTERISTICS Current Gain-Bandwidth Product (100MHz) Output Capacitance (1MHz) VCE=20V IC=20mA VCB=10V IE=0 8 Cibo Input Capacitance (1MHz) VEB=0.5V IC=0 80 hie Input Impedance (1kHz) VCE=10V IC=10mA Small-Signal Current Gain (1kHz) VCE=10V IC=10mA 375 Output Admittance (1kHz) VCE=10V IC=10mA 200 fT Cobo hfe hoe 150 MHz 0.25 1.25 pF ` ` SWITCHING CHARACTERISTICS 1 td Delay Time IC=150mA IB =15mA 20 tr Rise Time VCC=100V VEB(off)=-2V 35 ts Storage Time IC=150mA tf Fall Time IB1=IB2=15mA 1 IB =15mA ns 800 80 1) Pulse Test: Pulse Width < 300µs, Duty Cycle <2% 2) ft is defined as frequency at which |hfe|.ftest Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 4059 Issue 1