SEME 2N3741 SMD LAB MECHANICAL DATA Dimensions in mm MEDIUM POWER PNP SILICON POWER TRANSISTOR 3 .6 0 (0 .1 4 2 ) M a x . • LOW SATURATION VOLTAGE • HIGH GAIN 3 FEATURES 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 ) 1 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) 0 .7 6 (0 .0 3 0 ) m in . 0 .8 9 (0 .0 3 5 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 3 .4 1 (0 .1 3 4 ) 2 • Hermetically sealed Surface Mount Package. • Small Footprint - efficient use of PCB space. • Lightweight 9 .6 9 .3 1 1 .5 1 1 .2 7 (0 8 (0 8 (0 8 (0 .3 8 .3 6 .4 5 .4 4 1 ) 9 ) 6 ) 4 ) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) • High Packing Densities Complementary to NPN SMD1 2N3766SMD Pad 1 – Base Pad 2 – Collector Pad 3 – Emitter ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector – Base Voltage 80V VCEO Collector – Emitter Voltage (IB = 0) 80V VEBO Emitter – Base Voltage (IC = 0) 7V IC Collector Current 4A IC(PK) Peak Collector Current 10A IB Base Current 2A Ptot Total Dissipation at Tcase = 25°C Tstg Operating and Storage Temperature Range 50W –65 to 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 2659 Issue 1 SEME 2N3741SMD LAB ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit ELECTRICAL CHARACTERISTICS VCEO(sus)* Collector – Emitter Sustaining Voltage IC = 100mA IB = 0 ICBO Collector Base Cut–Off Current VCB = 80V IE = 0 100 µA ICEO Collector Emiiter Cut–Off Current VCE = 60V IB = 0 1.0 mA VCE = 80V VBE(OFF) = 1.5V 100 µA VCE = 60V VBE(OFF) = 1.5V 1 mA 0.5 mA ICEX Collector Cut–Off Current 80 TC = 150°C IEBO hFE* Emitter Base Cut–Off Current DC Current Gain VEB = 7V IC = 100mA VCE = 1V 40 IC = 250mA VCE = 1V 30 IC = 500mA VCE = 1V 20 IC = 1A VCE = 1V 10 VCE(sat)* Collector – Emitter Saturation Voltage IC = 1A VBE* Base – Emitter Saturation Voltage V 100 IB = 125mA 0.6 IC = 250mA IB = 1V 1.0 IC = 100mA VCE = 10V 3 f = 1MHz 4 — V DYNAMIC CHARACTERISTICS ft Transition Frequency Cob Output Capacitance hfe Small Signal Current Gain VCB = 10V IC = 0 100 f = 100KHz IC = 50mA VCE = 10V f = 1KHz MHz 25 pF — * Pulse Width ≤ 300µs , Duty Cycle < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 2659 Issue 1