2N6686 NPN BIPOLAR MULTI-EPITAXIAL POWER TRANSISTOR 25.15 (0.99) 26.67 (1.05) 6.35 (0.25) 9.15 (0.36) 10.67 (0.42) 11.18 (0.44) 1.52 (0.06) 3.43 (0.135) 1 2 22.23 (0.875) max. 0.97 (0.060) 1.10 (0.043) 16.64 (0.655) 17.15 (0.675) 29.9 (1.177) 30.4 (1.197) 38.61 (1.52) 39.12 (1.54) FEATURES 3 (case) • LOW VCE(SAT) • FAST SWITCHING APPLICATIONS 3.84 (0.151) 4.09 (0.161) 7.92 (0.312) 12.70 (0.50) • SUITABLE FOR POWER SUPPLIES AND OTHER HIGH VOLTAGE SWITCHING APPLICATIONS. TO3 (T0-204AA) Pin 1 – Base Pin 2 – Emitter Case – Collector ABSOLUTE MAXIMUM RATINGS (When mounted on a suitable header) VCEX Collector – Emitter Voltage (VBE = –1.5V) 210V VCEO Collector – Emitter Voltage (IB = 0) 160V VEBO Emitter – Base Voltage 8V IC Collector Current 25A ICM Collector Current (Peak) 50A IB Base Current 8A Tstg Storage Temperature Tj Maximum Operating Junction Temperature –65 to 200°C 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 6480 Issue 1 2N6686 ELECTRICAL CHARACTERISTICS (When mounted on a suitable header) Parameter VCEO(BR)* Test Conditions Collector – Emitter Breakdown Voltage IC = 200mA IB = 0 Min. Typ. Max. Unit 160 V ICEV Collector - Emitter Current VCE = 260V VBE = –1.5V 50 IEBO Emitter Cut-off Current (IC = 0) VBE = –8V IC = 0 100 IC = 25A IB = 2.5A 1.5 V IC = 25A IB = 2.5A 1.8 V IC = 1A VCE = 2V 30 IC = 10A VCE = 2V 25 100 — IC = 25A VCE = 2V 15 IC = 1A VCE = 10V 20 — VCE(sat)* VBE(sat)* hFE Collector - Emitter Saturation Voltage Base - Emitter Saturation Voltage DC Current Gain µA hfe Small Signal Current Gain IS/B Second Breakdown Collector Current IC = 11.1A VCE = 18V 1 Cob Output Capacitance VCE = 10V f = 0.1MHz 300 650 pF fT Transition Frequency IC = 1A VCE = 10V 20 100 MHz 4 f = 5MHz s *Pulse Test : tp = 300µs , δ ≤ 2%. SWITCHING CHARACTERISTICS (When mounted on a suitable header) Parameter Test Conditions Min. Typ. Max. Unit SWITCHING TIMES ON RESISTIVE LOAD td Delay time tr Rise time ts Storage time tf Fall time 0.1 IC = 25A 0.6 VBE = –4V 1.5 IB1 = –IB2 = 2.5A µS 0.25 TURN OFF SWITCHING CHARACTERISTICS – INDUCTIVE LOAD tc VCE/ IC Crossover Time IC = 25A VCC = 80V VBE = –4V Vclamp = 210V Rc ≤ 4Ω L = 25µH 0.5 µS IB1 = –IB2 = 3A Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 6480 Issue 1