BUV18 BUV19 MECHANICAL DATA Dimensions in mm NPN HIGH CURENT SWITCHING TRANSISTORS Designed for high energy applications 25.15 (0.99) 26.67 (1.05) 6.35 (0.25) 9.15 (0.36) 10.67 (0.42) 11.18 (0.44) requiring robust fast switching devices 1.52 (0.06) 3.43 (0.135) 1 2 22.23 (0.875) max. 1.47 (0.058) 1.60 (0.063) 16.64 (0.655) 17.15 (0.675) 29.9 (1.177) 30.4 (1.197) 38.61 (1.52) 39.12 (1.54) FEATURES 3 (case) 3.84 (0.151) 4.09 (0.161) 7.92 (0.312) 12.70 (0.50) • • • • • Fast Switching Low VCE(SAT) High Switching Currents High Reliability Military Options Available APPLICATIONS TO–3 (TO-204AE) Pin 1 – Gate Pin 2 – Drain Case – Source • High Efficiency Converters • Motor Drive Control • Switching Regulator ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector-Emitter Voltage (IE=0) BUV18 BUV19 120V 160V VCEO Collector-Emitter voltage (IB=0) 60V 80V VEBO Emitter- Base Voltage (IC=0) 7V 7V IC Collector Current 50A 50A IC(PK) Peak Collector Current 90A 70A IB Base Current 16A 12A IB(PK) Peak Base Current 40A 30A PTOT Total Dissipation @ Tcase = 25°C Tstg Storage Temperature Range Tj Maximum Operating Junction Temperature RθJC Thermal Resistance Junction – Case 250W -65 to 200°C 200°C Max 0.7°C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5369 Issue 1 BUV18 BUV19 ELECTRICAL CHARACTERISTICS(Tcase = 25°C unless otherwise stated) Parameter VCEO(sus)* Collector – Emitter Sustaining Voltage Test Conditions IB = 0 IC = 0.2A Min. BUV18 L = 25mH IB = 0 Collector – Emitter Saturation Voltage VBE(sat)* Base – Emitter Saturation Voltage V(BR)EBO Emitter – Base Breakdown Voltage ICEX Collector Cut-Off Current IEBO Emitter Cut-Off Current Max. Unit 60 V IC = 0.2A BUV19 IC = 40A IB = 4A BUV18 IC = 80A IB = 8A IC = 30A IB = 3A IC = 60A IB = 6A IC = 80A IB = 8A BUV18 2.2 IC = 60A IB = 6A BUV19 2.0 IC = 0A IE = 50mA L = 25mH VCE(sat)* Typ. 80 0.6 1.5 BUV19 0.6 V 1.2 7 V V VBE = -1.5V VCE =VCEX 1.0 IC = 0A Tcase = 100°C VEB = 5V VCE = 15V IC=2A 3.0 mA 1.0 SWITCHING CHARACTERISTICS fT Transition Frequency f = 10MHz ton Turn–On Time VCC = 60V tr Fall Time ts BUV18 8 MHz 1.2 1.5 IC = 80A 0.18 0.25 Storage Time IB1 = -IB2 = 8A 0.6 1.1 ton Turn–On Time VCC = 80V 0.9 1.3 tr Fall Time IC = 60A 0.17 0.25 ts Storage Time IB1 = -IB2 = 6A 0.6 1.1 BUV19 µs NOTES * Pulse Test: tp = 300µs, δ ≤ 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5369 Issue 1