CSD16407Q5C www.ti.com SLPS227D – DECEMBER 2009 – REVISED SEPTEMBER 2010 DualCool™ N-Channel NexFET™ Power MOSFET Check for Samples: CSD16407Q5C FEATURES 1 • • • • • • • • 2 PRODUCT SUMMARY Ultralow Qg and Qgd DualCool™ Package Optimized for Two Sided Cooling Avalanche Rated Pb Free Terminal Plating RoHS Compliant Halogen Free SON 5-mm × 6-mm Plastic Package • Point-of-Load Synchronous Buck Converter for Applications in Networking, Telecom and Computing Systems Optimized for Synchronous FET Applications DESCRIPTION The NexFET™ power MOSFET has been designed to minimize losses in power conversion applications. Drain Gate Source Top View D D D D D S G G Bottom View D D D S S S Qg Gate Charge Total (4.5V) Qgd Gate Charge Gate to Drain RDS(on) Drain to Source On Resistance V(th) Threshold Voltage V nC 3.5 nC VGS = 4.5V 2.5 mΩ VGS = 10V 1.8 mΩ 1.6 Device Package Media CSD16407Q5C SON 5-mm × 6-mm Plastic Package 13-Inch Reel V Qty Ship 2500 Tape and Reel ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise stated VALUE UNIT VDS Drain to Source Voltage 25 V VGS Gate to Source Voltage +16 / –12 V Continuous Drain Current, TC = 25°C 100 A Continuous Drain Current(1) 31 A IDM Pulsed Drain Current, TA = 25°C(2) 200 A PD Power Dissipation(1) 3.1 W TJ, TSTG Operating Junction and Storage Temperature Range –55 to 150 °C EAS Avalanche Energy, single pulse ID = 66A, L = 0.1mH, RG = 25Ω 218 mJ ID S RDS(on) vs VGS GATE CHARGE 7 12 ID = 25A 6 ID = 25A VDS = 12.5V 10 VG − Gate Voltage − V RDS(on) − On-State Resistance − mW 25 13.3 (1) Typical RqJA = 40°C/W on 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu pad on a 0.06-inch (1.52-mm) thick FR4 PCB. (2) Pulse duration ≤300ms, duty cycle ≤2% S S Drain to Source Voltage ORDERING INFORMATION APPLICATIONS • VDS 5 TC = 125°C C 4 3 2 TC = 25°C 8 6 4 2 1 0 0 0 2 4 6 8 VGS − Gate to Source Voltage − V 10 12 G006 0 5 10 15 20 25 30 35 Qg − Gate Charge − nC G003 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. DualCool, NexFET are trademarks of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2009–2010, Texas Instruments Incorporated CSD16407Q5C SLPS227D – DECEMBER 2009 – REVISED SEPTEMBER 2010 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. ELECTRICAL CHARACTERISTICS TA = 25°C, unless otherwise specified PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Static Characteristics BVDSS Drain to Source Voltage VGS = 0V, ID = 250mA IDSS Drain to Source Leakage Current VGS = 0V, VDS = 20V IGSS Gate to Source Leakage Current VDS = 0V, VGS = +16V / –12V VGS(th) Gate to Source Threshold Voltage VDS = VGS, ID = 250mA RDS(on) Drain to Source On Resistance gfs Transconductance 25 1.3 V 1 mA 100 nA 1.6 1.9 V VGS = 4.5V, ID = 25A 2.5 3.3 mΩ VGS = 10V, ID = 25A 1.8 2.4 mΩ VDS = 15V, ID = 25A 111 S Dynamic Characteristics CISS Input Capacitance COSS Output Capacitance 2040 2660 pF 1600 2080 pF CRSS Rg Reverse Transfer Capacitance 115 160 pF Series Gate Resistance 1.2 2.4 Qg Gate Charge Total (4.5V) Ω 13.3 18 nC Qgd Gate Charge Gate to Drain Qgs Gate Charge Gate to Source Qg(th) Gate Charge at Vth QOSS Output Charge td(on) Turn On Delay Time tr Rise Time 18.4 ns td(off) Turn Off Delay Time 16 ns tf Fall Time 9 ns VGS = 0V, VDS = 12.5V , f = 1MHz VDS = 12.5V, ID = 25A VDS = 13.5V, VGS = 0V VDS = 12.5V, VGS = 4.5V, ID = 25A, RG = 2Ω 3.5 nC 5.3 nC 3.1 nC 33 nC 11.9 ns Diode Characteristics VSD Diode Forward Voltage IS = 25A, VGS = 0V 0.8 1 V Qrr Reverse Recovery Charge VDD = 13.5V, IF = 25A, di/dt = 300A/ms 42 nC trr Reverse Recovery Time VDD = 13.5V, IF = 25A, di/dt = 300A/ms 34 ns THERMAL CHARACTERISTICS TA = 25°C, unless otherwise specified PARAMETER MIN (1) TYP MAX UNIT RqJC Thermal Resistance Junction to Case (Top Source) 1.2 °C/W RqJC Thermal Resistance Junction to Case (Bottom Drain) (1) 1.1 °C/W RqJA Thermal Resistance Junction to Ambient (1) 51 °C/W (1) (2) 2 (2) RqJC is determined with the device mounted on a 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu pad on a 1.5-inch × 1.5-inch (3.81-cm × 3.81-cm), 0.06-inch (1.52-mm) thick FR4 PCB. RqJC is specified by design, whereas RqJA is determined by the user’s board design. Device mounted on FR4 material with 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu. Submit Documentation Feedback Copyright © 2009–2010, Texas Instruments Incorporated Product Folder Link(s): CSD16407Q5C CSD16407Q5C www.ti.com SLPS227D – DECEMBER 2009 – REVISED SEPTEMBER 2010 GATE GATE Source N-Chan 5x6 QFN TTA MIN Rev3 N-Chan 5x6 QFN TTA MAX Rev3 Max RqJA = 51°C/W when mounted on 1 inch2 (6.45 cm2) of 2-oz. (0.071-mm thick) Cu. Source Max RqJA = 121°C/W when mounted on minimum pad area of 2-oz. (0.071-mm thick) Cu. DRAIN DRAIN M0137-02 M0137-01 TYPICAL MOSFET CHARACTERISTICS TA = 25°C, unless otherwise specified ZθJA − Normalized Thermal Impedance 10 1 0.5 0.3 0.1 0.1 Duty Cycle = t1/t2 0.05 P 0.01 0.02 0.01 t1 t2 Single Pulse 0.001 0.001 0.01 o Typical RqJA = 94 C/W (min Cu) TJ = P x ZqJA x RqJA 0.1 1 10 100 t P − Pulse Duration − s 1k G012 Figure 1. Transient Thermal Impedance Submit Documentation Feedback Copyright © 2009–2010, Texas Instruments Incorporated Product Folder Link(s): CSD16407Q5C 3 CSD16407Q5C SLPS227D – DECEMBER 2009 – REVISED SEPTEMBER 2010 www.ti.com TYPICAL MOSFET CHARACTERISTICS (continued) TA = 25°C, unless otherwise specified 80 80 60 VGS = 4.5V 50 VGS = 3V 40 VGS = 3.5V 30 VGS = 2.5V 20 10 0.5 1.0 1.5 2.0 2.5 40 TC = 25°C 30 20 TC = −55°C 1.5 2.0 2.5 3.0 3.5 VGS − Gate to Source Voltage − V G001 4.0 G002 Figure 2. Saturation Characteristics Figure 3. Transfer Characteristics TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING 12 6 ID = 25A VDS = 12.5V 10 f = 1MHz VGS = 0V 5 C − Capacitance − nF VGS − Gate Voltage − V TC = 125°C 50 0 1.0 3.0 VDS − Drain to Source Voltage − V 8 6 4 2 4 COSS = CDS + CGD CISS = CGD + CGS 3 2 CRSS = CGD 1 0 0 0 5 10 15 20 25 30 35 Qg − Gate Charge − nC 0 10 15 20 VDS − Drain to Source Voltage − V 25 G004 Figure 4. Gate Charge Figure 5. Capacitance TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING 7 RDS(on) − On-State Resistance − mW ID = 250µA 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 −75 5 G003 2.00 VGS(th) − Threshold Voltage − V 60 10 0 0.0 −25 25 75 125 175 TC − Case Temperature − °C ID = 25A 6 5 TC = 125°C C 4 3 2 TC = 25°C 1 0 0 2 4 6 8 VGS − Gate to Source Voltage − V G005 Figure 6. Threshold Voltage vs. Temperature 4 VDS = 5V 70 VGS = 10V ID − Drain Current − A ID − Drain Current − A 70 10 12 G006 Figure 7. On-State Resistance vs. Gate to Source Voltage Submit Documentation Feedback Copyright © 2009–2010, Texas Instruments Incorporated Product Folder Link(s): CSD16407Q5C CSD16407Q5C www.ti.com SLPS227D – DECEMBER 2009 – REVISED SEPTEMBER 2010 TYPICAL MOSFET CHARACTERISTICS (continued) TA = 25°C, unless otherwise specified 100 ID = 25A VGS = 10V 1.6 ISD − Source to Drain Current − A Normalized On-State Resistance 1.8 1.4 1.2 1.0 0.8 0.6 0.4 −75 10 1 0.1 TC = 25°C 0.01 0.001 0.0001 −25 25 75 125 175 TC − Case Temperature − °C 0.0 0.2 0.4 0.6 0.8 1.0 Figure 8. Normalized On-State Resistance vs. Temperature Figure 9. Typical Diode Forward Voltage TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING G008 I(AV) − Peak Avalanche Current − A 1k 100 100mS 10 1ms 10ms 1 0.1 1.2 VSD − Source to Drain Voltage − V G007 1k ID − Drain Current − A TC = 125°C Area Limited by RDS(on) 100ms Single Pulse o Typical RqJA = 94 C/W (min Cu) 0.01 0.01 0.1 DC 1 10 10 TC = 125°C 1 0.01 100 VD − Drain Voltage − V TC = 25°C 100 0.1 1 10 100 t(AV) − Time in Avalanche − ms G009 Figure 10. Maximum Safe Operating Area G010 Figure 11. Single Pulse Unclamped Inductive Switching TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING 120 ID − Drain Current − A 100 80 60 40 20 0 −50 −25 0 25 50 75 100 125 TC − Case Temperature − °C 150 175 G011 Figure 12. Maximum Drain Current vs. Temperature Submit Documentation Feedback Copyright © 2009–2010, Texas Instruments Incorporated Product Folder Link(s): CSD16407Q5C 5 CSD16407Q5C SLPS227D – DECEMBER 2009 – REVISED SEPTEMBER 2010 www.ti.com MECHANICAL DATA Q5C Package Dimensions E1 K L E2 8 8 7 7 4 4 5 5 e 3 6 3 6 D2 D1 E 2 N 1 Pin 9 1 q Exposed Heat Slug L c1 2 N1 b M1 M Top View Bottom View Side View TM DualCool Pinout c E1 A q Pin# Label 1, 2, 3, 9 Source 4 Gate 5, 6, 7, 8 Drain Front View M0162-01 DIM MILLIMETERS MAX MIN MAX A 0.950 1.050 0.037 0.039 b 0.360 0.460 0.014 0.018 c 0.150 0.250 0.006 0.010 c1 0.150 0.250 0.006 0.010 D1 4.900 5.100 0.193 0.201 D2 4.320 4.520 0.170 0.178 E 4.900 5.100 0.193 0.201 E1 5.900 6.100 0.232 0.240 E2 3.920 4.12 0.154 e 6 INCHES MIN 1.27 TYP 0.162 0.050 K 0.760 – 0.030 – L 0.510 0.710 0.020 0.028 q – – – – M 3.260 3.460 0.128 0.136 M1 0.520 0.720 0.020 0.028 N 2.720 2.920 0.107 0.115 N1 1.227 1.427 0.048 0.056 Submit Documentation Feedback Copyright © 2009–2010, Texas Instruments Incorporated Product Folder Link(s): CSD16407Q5C CSD16407Q5C www.ti.com SLPS227D – DECEMBER 2009 – REVISED SEPTEMBER 2010 DIM Recommended PCB Pattern F1 F7 F3 8 1 F2 F11 F5 F9 5 4 F6 MILLIMETERS INCHES MIN MAX MIN MAX F1 6.205 6.305 0.244 0.248 F2 4.460 4.560 0.176 0.180 F3 4.460 4.560 0.176 0.180 F4 0.650 0.700 0.026 0.028 F5 0.620 0.670 0.024 0.026 F6 0.630 0.680 0.025 0.027 F7 0.700 0.800 0.028 0.031 F8 0.650 0.700 0.026 0.028 F9 0.620 0.670 0.024 0.026 F10 4.900 5.000 0.193 0.197 F11 4.460 4.560 0.176 0.180 F8 F4 F10 M0139-01 For recommended circuit layout for PCB designs, see application note SLPA005 – Reducing Ringing Through PCB Layout Techniques. K0 4.00 ±0.10 (See Note 1) 0.30 ±0.05 2.00 ±0.05 +0.10 –0.00 12.00 ±0.30 Ø 1.50 1.75 ±0.10 Q5C Tape and Reel Information 5.50 ±0.05 B0 R 0.30 MAX A0 8.00 ±0.10 Ø 1.50 MIN A0 = 6.50 ±0.10 B0 = 5.30 ±0.10 K0 = 1.40 ±0.10 R 0.30 TYP M0138-01 Notes: 1. 10-sprocket hole-pitch cumulative tolerance ±0.2 2. Camber not to exceed 1mm in 100mm, noncumulative over 250mm 3. Material: black static-dissipative polystyrene 4. All dimensions are in mm, unless otherwise specified. 5. Thickness: 0.30 ± 0.05 mm 6. MSL1 260°C (IR and convection) PbF reflow compatible Submit Documentation Feedback Copyright © 2009–2010, Texas Instruments Incorporated Product Folder Link(s): CSD16407Q5C 7 CSD16407Q5C SLPS227D – DECEMBER 2009 – REVISED SEPTEMBER 2010 www.ti.com REVISION HISTORY Changes from Original (October 2009) to Revision A Page • Changed the device From: Procuct Preview To: Production ................................................................................................ 1 • Changed Application - From: Optimized for Control FET ApplicationsTo: Optimized for Synchronous FET Applications ........................................................................................................................................................................... 1 • Changed the pinout illustration. ............................................................................................................................................ 1 • Changed the Q5C Package Dimensions illustration ............................................................................................................. 6 Changes from Revision A (December 2009) to Revision B Page • Changed the ABSOLUTE MAXIMUM RATINGS table, ID - Continuous Drain Current value From: 30A To: 31A .............. 1 • Changed Note 1 of the ABSOLUTE MAXIMUM RATINGS table From: Typical RqJA = 41°C To: Typical RqJA = 40°C ....... 1 • Changed Figure 1 - From: Typical RqJA = 98°C/W To: Typical RqJA = 94°C/W .................................................................... 3 • Changed Figure 10 - From: Typical RqJA = 98°C/W To: Typical RqJA = 94°C/W .................................................................. 5 • Changed Figure 11 - X axis values ...................................................................................................................................... 5 Changes from Revision B (January 2010) to Revision C • Changed the labels on the Bottom View pinout image ......................................................................................................... 1 Changes from Revision C (February 2010) to Revision D • 8 Page Page Deleted the Package Marking Information section ............................................................................................................... 7 Submit Documentation Feedback Copyright © 2009–2010, Texas Instruments Incorporated Product Folder Link(s): CSD16407Q5C PACKAGE MATERIALS INFORMATION www.ti.com 21-Jan-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device CSD16407Q5C Package Package Pins Type Drawing SON DQU 8 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2500 330.0 12.8 Pack Materials-Page 1 6.5 B0 (mm) K0 (mm) P1 (mm) 5.3 1.4 8.0 W Pin1 (mm) Quadrant 12.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 21-Jan-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) CSD16407Q5C SON DQU 8 2500 335.0 335.0 32.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee® Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated