ZMD-Standard November 2001 Package PDIP28 (600 mil) MDS 713 Supersedes Edition 11.95 Dimensions in millimetres Based on IEC 191-2N: Type 051G06 E A1 Seating Plane L A 1 Dimensions e b1 0,254 M Z c 28 ° e1 1 D Pin 1 Index area Dimensions of Sub-Group B1 Dimensions of Sub-Group C1 Amax 5,10 Amin 3,00 A1min 0,38 A1max 1,80 ** 0,35 Lmax 5,00 ** 0,59 Dmin* 36,70 cmin 0,20 Dmax* 37,50 cmax 0,36 °min 0 enom 2,54 °max 15 b1min b1max e1nom 15,24 Emin* 13,60 Emax* 14,30 Lmin 2,60 Zmax 2,54 * without mold-flash **The lead position tolerance requires slots with a minimum diameter of 0,7mm. The spacing between adjacent slots is 2,54mm. 2 Weight 4,0 g 3 Package Body Material Low Stress Epoxy 4 Lead Material FeNi-Alloy or Cu-Alloy 5 Lead Finish solder plating Zentrum Mikroelektronik Dresden AG Editor: signed Schoder Date: 27.11.2001 Check: signed Marx Quality signed Lorenz: Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten. Doc-No. QS-000713-HD-03 Proprietary data, company confidential. All rights reserved.