ZMD-Standard November 2001 Package PDIP24 (600 mil) MDS 712 Supersedes Edition 11.95 Dimensions in millimetres Based on IEC 191-2N: Type 051G03 A1 L A E Seating Plane 1 Dimensions Z b1 e 0,254 M c 24 ° e1 1 D Pin 1 Index area Dimensions of Sub-Group B1 Dimensions of Sub-Group C1 Amax 5,10 Amin 3,00 A1min 0,38 A1max 1,80 ** 0,35 Lmax 5,00 ** 0,59 Dmin* 31,50 cmin 0,20 Dmax* 32,40 cmax 0,36 °min 0 enom 2,54 °max 15 e1nom 15,24 * without mold-flash Emin* 13,60 ** b1min b1max Emax* The lead position tolerance requires slots with a minimum diameter of 0,7mm. The spacing between adjacent slots 14,30 Lmin 2,60 Zmax 2,54 is 2,54mm. 2 Weight 3,5 g 3 Package Body Material Low Stress Epoxy 4 Lead Material FeNi-Alloy or Cu-Alloy 5 Lead Finish solder plating Zentrum Mikroelektronik Dresden AG Editor: signed Schoder Date: 27.11.2001 Check: signed Ma rx Quality: signed Lorenz Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten. Doc-No. QS-000712-HD-03 Proprietary data, company confidential. All rights reserved.