ZMD-Standard November 2001 Package PDIP32 (600 mil) MDS 746 Supersedes Edition 03.97 Dimensions in millimetres E A1 Seating Plane L A Based on JEDEC JEP95: MO-015 1 Dimensions c b1 0,254 M e ° Z e1 32 1 D Pin 1 Index area Dimensions of Sub-Group B1 Dimensions of Sub-Group C1 Amax 4,83 Amin 4,32 A1min 0,38 A1max 1,27 b1min** 0,35 Lmax 3,43 ** 0,59 Dmin* 41,78 cmin 0,20 Dmax* 42,04 cmax 0,36 °min 0 enom 2,54 °max 15 e1nom 15,24 * without mold-flash Emin* 13,46 ** Emax* 13,97 b1max Lmin 2,60 Zmax 2,03 2 Weight =4,7 g 3 Package Body Material Low Stress Epoxy 4 Lead Material FeNi-Alloy or Cu-Alloy 5 Lead Finish solder plating The lead position tolerance requires slots with a minimum diameter of 0,7mm. The spacing between adjacent slots is 2,54mm. Zentrum Mikroelektronik Dresden AG Editor: signed Schoder Date: 27.11.2001 Check: signed Marx Quality: signed Lorenz Doc-No. QS-000746-HD-02