AVAGO ALM

ALM-38140
50MHz – 4GHz PIN Diode Variable Attenuator Module
Data Sheet
Description
Features
Avago Technologies’ ALM-38140 is a fully matched
wideband variable attenuator module with high linearity
performance and high dynamic range. The high dynamic
range and low phase shift can be achieved with only one
external inductor place between Linput and Loutput.
• Fully integrated module
ALM-38140 is a fully integrated solution using Avago
Technologies’ low distortion silicon PIN diodes housed in
a miniature 3.8 x 3.8 x 1.0 mm3 MCOB (Multiple-Chips-OnBoard) package.
• Low phase shift performance
This variable attenuator module is easily operated with
a constant voltage, Vsupply = 2.7V and a control voltage,
Vcontrol = 1 – 5V. No external biasing components
needed.
Typical Performance at 1.9GHz
ALM-38140 is ideal for gain control in RF amplifier
circuits.
• Excellent Input IP3 performance
• High Input P1dB compression
• Tape-and-Reel packaging option available
Specifications
• Attenuation : 39dB
• Insertion Loss : 3.2dB
• Input IP3 : 50dBm
• Input P1dB : > 30dBm
Applications
• Broadband system applications; such as CATV, WCDMA,
VSAT, WIMAX, Cellular base station.
Linput
Loutput
Vcontrol
Package Marking
38140
WWYY
XXXX
• High dynamic range
• General purpose voltage controlled attenuator for low
current applications.
• Temperature compensation circuitry
RF 2
GND
RF 1
• Automatic Gain Control
Vsupply
Top View
Bottom View
Note:
Package marking provides orientation and identification
“38140” =Device Part Number
“WWYY” =Work week and year of manufacture
“XXXX” =Last 4 digit of assembly lot number
* RF1 and RF2 can be used either as RF input or RF output as they are
symmetrical.
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 300 V
ESD Human Body Model = 900 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
ALM-80210 Absolute Maximum Rating [1] TA = 25°C
Symbol
Parameter
Unit
Absolute Maximum
Isupply, max
Supply Current
mA
18.0
Icontrol, max
Control Current
mA
33.4
Pin, max
RF Input Power
dBm
27dBm CW, 36dBm with
12.5% duty cycle
Pdiss
Total Power Dissipation
W
0.3
Tj
Junction Temperature
°C
150
Tstg
Storage Temperature
°C
-60 to 150
Thermal Resistance [2] θjc = 106.3°C/W
(Vc = 1V, Vsupply = 2.7V, Tc = 85°C)
Notes:
1. Operation in excess of any one of these
limits may result in permanent damage to the
device.
2. Thermal resistance is measured from junction
to case using Infra-Red method.
Electrical Specifications, Vsupply = 2.7V, TA = 25°C, Z0 = 50Ω
Symbol
Parameter and Test Condition
Frequency (MHz)
Unit
Min
Typ
Max
Isupply
Supply Current drain (Vcontrol = 1V)
mA
–
2.5
–
Icontrol
Control Current drain (Vcontrol = 5V)
S21
Maximum Attenuation (Vcontrol = 1V)
900
mA
–
20.5
–
dB
–
42.0
–
S21
Maximum Attenuation (Vcontrol = 1V)
1900
dB
36.0
39.0
–
S21
Insertion Loss (Vcontrol = 5V)
900
dB
–
2.8
–
S21
Insertion Loss (Vcontrol = 5V)
1900
dB
–
3.2
3.7
Dynamic Range
900
dB
–
38
–
Dynamic Range
1900
dB
33
36.5
–
IRL
Input Return Loss (Vcontrol = 5V)
1900
dB
10
14.5
–
ORL
Output Return Loss (Vcontrol = 5V)
1900
dB
10
13.5
–
IIP3 [5]
Input Third Order Intercept Point
900
dBm
–
50
–
IIP3 [5]
Input Third Order Intercept Point
1900
dBm
–
50
–
IP1dB [6]
Input Power at P1dB Compression (Vcontrol = 5V)
900
dBm
–
32
–
IP1dB [6]
Input Power at P1dB Compression (Vcontrol = 5V)
1900
dBm
–
33
–
Phase Shift (Vcontrol = 1V)
1900
degrees
–
10.5
–
Notes:
4. Data above is obtained using demo board shown in Figure 32 and 33.
5. 2-tone IIP3 test condition: FRF1, FRF2 = 1.1MHz separation, Input power = 22dBm
6. IP1dB measured with 12.5% duty cycle.
7. The performance above obtained with phase compensation inductor value based on the table 1 below.
8. Use proper biasing, heat sink and de-rating to ensure maximum channel temperature is not exceeded. See absolute maximum ratings and
application note (if applicable) for more details.
ALM-38140 Typical Broadband S-Parameters
(Vsupply = 2.7V, Vctrl = 1V, Tc = 25°C, matched 50Ω)
Freq
GHz
S11
Mag.
Ang.
S21
Mag.
Ang.
S12
Mag.
Ang.
S22
Mag.
dB.
0.05
0.14
-17.21
dB.
-175.1
0.01
-43.21
dB.
43.6
0.01
-43.10
dB.
Ang.
43.5
0.13
-17.64
0.1
0.14
-17.23
176.3
0.01
-41.98
19.5
0.01
-173.8
-42.00
19.5
0.13
-17.68
177.8
0.2
0.3
0.14
-17.32
165.5
0.13
-17.50
155.6
0.01
-41.46
7.1
0.01
-41.12
1.3
0.01
-41.54
7.7
0.13
-17.75
167.6
0.01
-41.13
1.2
0.13
-17.85
159.5
0.4
0.13
-17.62
0.5
0.13
-17.81
147.0
0.01
-40.73
139.2
0.01
-40.38
-3.6
0.01
-40.74
-3.6
0.13
-18.03
152.3
-8.1
0.01
-40.40
-8.1
0.12
-18.30
145.8
0.6
0.12
0.7
0.12
-18.06
131.5
0.01
-18.35
123.2
0.01
-40.03
-12.4
0.01
-39.97
-12.4
0.12
-18.59
139.2
-39.56
-16.4
0.01
-39.62
-16.6
0.11
-18.88
0.8
0.12
-18.55
115.4
132.4
0.01
-39.19
-21.2
0.01
-39.19
-20.9
0.11
-19.18
125.8
0.9
0.11
-18.88
1
0.11
-19.38
108.4
0.01
-38.68
-25.3
0.01
-38.68
-25.3
0.11
-19.51
119.5
100.6
0.01
-38.13
-30.4
0.01
-38.13
-30.4
0.10
-19.88
113.6
1.1
0.10
1.2
0.10
-19.78
92.2
0.01
-37.61
-35.7
0.01
-37.59
-35.5
0.10
-20.30
108.2
-20.11
85.2
0.01
-37.07
-41.1
0.01
-37.04
-41.3
0.09
-20.84
103.5
1.3
1.4
0.09
-20.71
79.3
0.01
-36.49
-47.3
0.01
-36.50
-47.0
0.08
-21.52
99.0
0.08
-21.61
72.7
0.02
-35.98
-53.1
0.02
-35.96
-53.2
0.08
-22.27
93.8
1.5
0.08
-22.49
64.6
0.02
-35.40
-59.7
0.02
-35.40
-59.6
0.07
-22.87
88.5
1.6
0.07
-23.16
57.3
0.02
-34.90
-66.0
0.02
-34.93
-66.2
0.07
-23.24
85.0
1.7
0.06
-23.92
53.0
0.02
-34.35
-73.0
0.02
-34.38
-72.8
0.07
-23.64
85.0
1.8
0.05
-25.27
50.7
0.02
-33.85
-80.0
0.02
-33.86
-79.8
0.06
-24.35
86.7
1.9
0.04
-27.06
47.5
0.02
-33.36
-86.9
0.02
-33.35
-87.0
0.05
-25.24
87.2
2
0.04
-28.95
43.5
0.02
-32.86
-94.2
0.02
-32.90
-94.2
0.05
-25.74
85.4
2.1
0.03
-30.32
42.8
0.02
-32.45
-101.1
0.02
-32.44
-101.0
0.05
-25.50
84.1
2.2
0.03
-31.50
52.5
0.03
-31.86
-108.7
0.03
-31.86
-108.7
0.06
-24.85
85.9
2.3
0.02
-32.14
72.7
0.03
-31.44
-116.5
0.03
-31.41
-116.4
0.06
-24.16
88.5
2.4
0.03
-31.61
93.4
0.03
-30.97
-124.2
0.03
-30.96
-124.0
0.07
-23.60
89.0
2.5
0.03
-30.43
102.9
0.03
-30.54
-131.6
0.03
-30.52
-131.6
0.07
-22.98
86.7
2.6
0.04
-28.44
101.9
0.03
-30.07
-139.7
0.03
-30.05
-139.7
0.08
-22.16
82.6
2.7
0.05
-26.30
98.6
0.03
-29.60
-146.4
0.03
-29.61
-146.5
0.09
-21.31
78.2
2.8
0.06
-24.35
96.5
0.04
-29.08
-155.1
0.04
-29.07
-155.0
0.10
-20.38
72.5
2.9
0.07
-23.06
92.8
0.04
-28.63
-163.2
0.04
-28.63
-163.1
0.11
-19.48
65.1
3
0.08
-22.00
85.2
0.04
-28.18
-171.5
0.04
-28.15
-171.5
0.12
-18.49
58.1
3.5
0.13
-17.56
41.6
0.05
-25.81
146.0
0.05
-25.80
146.0
0.18
-14.88
14.6
4
0.19
-14.61
-10.1
0.07
-23.54
101.2
0.07
-23.53
101.3
0.25
-11.88
-36.3
4.5
0.25
-12.02
-66.3
0.09
-21.00
51.4
0.09
-21.00
51.4
0.35
-9.12
-89.3
5
0.35
-9.20
-125.3
0.11
-19.02
-6.1
0.11
-19.01
-6.1
0.48
-6.34
-144.1
5.5
0.48
-6.44
176.4
0.12
-18.29
-67.2
0.12
-18.31
-67.2
0.62
-4.13
159.5
6
0.61
-4.35
120.7
0.11
-19.03
-126.7
0.11
-19.03
-126.8
0.72
-2.84
104.4
Notes:
9. S-parameter is measured with reference plane at SMA end launch using demo board shown in Figure 33.
10. Demo board 50Ω transmission line is CPWG with W = 23 mils, G = 18.5 mils, L = 383.7 mils, 10 mils Rogers RO4350, 0.5oz Cu.
11. Demo board SMA end launch is Johnson 142-0701-851.
12.The above performance is with board loss removed.
ALM-38140 Typical Broadband S-Parameters
(Vsupply = 2.7V, Vctrl = 5V, Tc = 25°C, matched 50Ω)
Freq
GHz
S11
Mag.
Ang.
S21
Mag.
Ang.
S12
Mag.
Ang.
S22
Mag.
dB.
0.05
0.04
-28.48
dB.
103.9
0.74
-2.64
dB
0.3
0.74
-2.62
dB.
Ang.
0.2
0.03
-29.15
102.3
0.1
0.01
0.2
0.02
-36.56
153.6
0.73
-33.27
-144.2
0.73
-2.67
-7.8
0.73
-2.69
-19.2
0.73
-2.68
-7.8
0.01
-36.95
158.3
-2.69
-19.2
0.02
-33.01
-141.8
0.3
0.4
0.04
-28.98
-134.9
0.05
-25.79
-138.3
0.73
-2.72
-29.6
0.73
-2.73
-39.9
0.73
-2.72
-29.7
0.04
-28.32
-133.0
0.73
-2.73
-39.9
0.06
-25.01
0.5
0.07
-23.43
-144.4
0.73
-2.74
-135.2
-50.0
0.73
-2.76
-50.0
0.07
-22.65
-140.7
0.6
0.08
0.7
0.10
-21.61
-152.2
0.73
-20.34
-160.9
0.73
-2.77
-60.0
0.73
-2.76
-60.0
0.09
-21.00
-147.6
-2.79
-70.0
0.72
-2.79
-70.0
0.10
-19.60
-155.1
0.8
0.9
0.11
-19.11
-170.0
0.12
-18.09
-178.7
0.72
-2.83
-80.0
0.72
-2.82
-80.0
0.12
-18.40
-163.7
0.72
-2.84
-90.0
0.72
-2.84
-90.0
0.13
-17.41
-172.9
1
0.14
-17.34
1.1
0.15
-16.70
172.5
0.72
-2.87
-99.8
0.72
-2.87
-99.9
0.15
-16.64
177.7
162.8
0.72
-2.91
-109.8
0.72
-2.91
-109.8
0.16
-15.92
168.9
1.2
0.16
1.3
0.17
-16.03
152.5
0.71
-2.94
-119.6
0.71
-2.94
-119.7
0.17
-15.25
160.4
-15.42
143.4
0.71
-2.97
-129.5
0.71
-2.97
-129.5
0.18
-14.69
1.4
151.5
0.18
-15.06
134.9
0.71
-3.01
-139.4
0.71
-3.00
-139.4
0.19
-14.32
142.5
1.5
0.18
-14.82
126.0
0.71
-3.03
-149.2
0.70
-3.04
-149.2
0.20
-14.03
133.0
1.6
0.19
-14.43
116.3
0.70
-3.07
-159.1
0.70
-3.05
-159.1
0.21
-13.63
123.6
1.7
0.20
-14.02
106.8
0.70
-3.11
-168.9
0.70
-3.11
-168.9
0.22
-13.21
115.0
1.8
0.21
-13.76
98.1
0.70
-3.15
-178.7
0.70
-3.15
-178.7
0.22
-12.96
106.6
1.9
0.21
-13.72
89.7
0.69
-3.17
171.5
0.69
-3.17
171.5
0.23
-12.93
97.7
2
0.21
-13.70
80.8
0.69
-3.19
161.6
0.69
-3.19
161.5
0.23
-12.87
88.4
2.1
0.21
-13.56
71.4
0.69
-3.23
151.6
0.69
-3.24
151.7
0.23
-12.66
79.1
2.2
0.21
-13.38
62.5
0.69
-3.28
141.8
0.69
-3.27
141.8
0.24
-12.43
70.3
2.3
0.21
-13.36
54.1
0.68
-3.29
131.9
0.68
-3.32
131.9
0.24
-12.38
61.8
2.4
0.21
-13.53
45.7
0.68
-3.33
122.1
0.68
-3.34
122.1
0.24
-12.48
53.2
2.5
0.21
-13.67
36.3
0.68
-3.36
112.1
0.68
-3.36
112.1
0.24
-12.48
44.4
2.6
0.21
-13.71
27.0
0.68
-3.40
102.2
0.67
-3.42
102.2
0.24
-12.43
35.4
2.7
0.21
-13.68
18.4
0.67
-3.43
92.2
0.67
-3.44
92.2
0.24
-12.41
26.3
2.8
0.20
-13.79
9.8
0.67
-3.47
82.2
0.67
-3.47
82.2
0.24
-12.40
17.2
2.9
0.20
-13.98
0.3
0.67
-3.53
72.1
0.67
-3.53
72.2
0.24
-12.34
8.3
3
0.20
-14.04
-9.9
0.66
-3.59
62.1
0.66
-3.59
62.1
0.24
-12.24
-0.2
3.5
0.19
-14.42
-57.0
0.64
-3.89
11.1
0.64
-3.89
11.0
0.26
-11.64
-45.1
4
0.18
-14.77
-104.2
0.61
-4.28
-41.3
0.61
-4.28
-41.3
0.29
-10.79
-90.3
4.5
0.17
-15.15
-148.6
0.57
-4.82
-94.7
0.57
-4.82
-94.7
0.32
-9.91
-135.4
5
0.18
-14.73
175.9
0.53
-5.45
-150.7
0.53
-5.44
-150.6
0.37
-8.62
-176.9
5.5
0.23
-12.76
151.6
0.46
-6.66
148.9
0.46
-6.67
149.0
0.46
-6.75
142.6
6
0.38
-8.42
118.0
0.35
-9.23
85.5
0.35
-9.24
85.5
0.58
-4.76
98.5
ALM-38140 Typical Broadband Performance at 25°C
(Vsupply = 2.7V, Vctrl = 1V - 5V)
0.00
Vctrl=5.0V
Vctrl=4.0V
Vctrl=3.0V
Vctrl=2.0V
Vctrl=1.5V
Vctrl=1.2V
Vctrl=1.0V
S21 (dB)
-10.00
-20.00
-30.00
-40.00
-50.00
0
1000
2000
3000
Frequency (MHz)
4000
Figure 1. S21 Vs Frequency as function of Vctrl
ALM-38140 Typical Over-Temperature Broadband Performance
(Vsupply = 2.7V, Vctrl = 1V & 5V)
0
0
25°C
85°C
-40°C
-10
S11 (dB)
S11 (dB)
-10
-20
-30
-40
0
1000
2000
Frequency (MHz)
3000
0
-10
-10
-20
25°C
85°C
-40°C
-30
0
1000
0
1000
2000
Frequency (MHz)
3000
-20
25°C
85°C
-40°C
-30
2000
Frequency (MHz)
3000
4000
Figure 4. S22 (Return Loss) at Vctrl=1V vs Frequency vs Temperature
4000
Figure 3. S11 (Return Loss) at Vctrl =5V vs Frequency vs Temperature
S22 (dB)
S22 (dB)
-40
4000
0
-40
25°C
85°C
-40°C
-30
Figure 2. S11 (Return Loss) at Vctrl =1V vs Frequency vs Temperature
-20
-40
0
1000
2000
Frequency (MHz)
3000
4000
Figure 5. S22 (Return Loss) at Vctrl=5V vs Frequency vs Temperature
ALM-38140 Typical Over-Temperature Broadband Performance
(Vsupply = 2.7V, Vctrl = 1V & 5V)
0.00
0.00
-1.00
S21 (dB)
S21 (dB)
-20.00
-40.00
25°C
85°C
-40°C
-60.00
0
1000
2000
Frequency (MHz)
3000
0
Phase Shift (deg)
Phase Shift (deg)
120.00
25°C
85°C
-40°C
30.00
100.00
4000
25°C
85°C
-40°C
80.00
60.00
40.00
0.00
10.00
20.00
30.00
Attenuation (dB)
-20.00
0.00
40.00
Figure 8. Phase shift vs Attenuation vs Temperature at 900MHz
10.00
20.00
Attenuation (dB)
30.00
0.00
25°C
85°C
-40°C
-10.00
25°C
85°C
-40°C
-5.00
Return Loss (dB)
-5.00
40.00
Figure 9. Phase shift vs Attenuation vs Temperature at 1900MHz
0.00
Return Loss (dB)
3000
20.00
10.00
-15.00
-20.00
-10.00
-15.00
-20.00
-25.00
-25.00
-30.00
0.00
2000
Frequency (MHz)
140.00
50.00
-10.00
0.00
1000
Figure 7. S21 at Vctrl=5V (Insertion Loss) vs Frequency vs Temperature
110.00
70.00
-3.00
-5.00
4000
Figure 6. S21 at Vctrl=1V (Attenuation) vs Frequency vs Temperature
90.00
-2.00
-4.00
-80.00
10.00
20.00
30.00
Attenuation (dB)
40.00
Figure 10. Return loss vs Attenuation vs Temperature at 900MHZ
25°C
85°C
-40°C
50.00
-30.00
0.00
10.00
20.00
Attenuation (dB)
30.00
Figure 11. Return loss vs Attenuation vs Temperature at 1900MHZ
40.00
ALM-38140 Typical Over-Temperature Broadband Performance
(Vsupply = 2.7V, Vctrl = 1V & 5V)
45.00
45.00
25°C
85°C
-40°C
IP1dB (dBm)
IP1dB (dBm)
40.00
35.00
30.00
25.00
0
10
20
30
Attenuation (dB)
40
50
Figure 12. Input P1dB vs Attenuation vs Temperature at 900MHZ
35.00
20
30
Attenuation (dB)
Figure 13. Input P1dB vs Attenuation vs Temperature at 1900MHZ
0
10
40
70.00
25°C
85°C
-40°C
25°C
85°C
-40°C
65.00
IIP3 (dBm)
65.00
IIP3 (dBm)
40.00
30.00
70.00
60.00
55.00
60.00
55.00
50.00
45.00
25°C
85°C
-40°C
0
10
20
30
Attenuation (dB)
40
50.00
50
Figure 14. Input IP3 vs Attenuation vs Temperature at 900MHZ
0
10
20
Attenuation (dB)
30
40
Figure 15. Input IP3 vs Attenuation vs Temperature at 1900MHZ
ALM-38140 Typical With Phase Compensation Coil Performance at 25°C
(Vsupply = 2.7V, Vctrl = 1V - 5V)
Vctrl=5.0V
Vctrl=4.0V
Vctrl=3.0V
Vctrl=2.0V
Vctrl=1.5V
S21 (dB)
-10.00
-20.00
Vctrl=1.2V
-30.00
-40.00
-50.00
800
Vctrl=1.0V
900
1000
1100
Frequency (MHz)
Figure 16. S21 Vs Frequency as function of Vctrl at Fc= 1GHz
1200
Vctrl=5.0V
Vctrl=4.0V
Vctrl=3.0V
Vctrl=2.0V
Vctrl=1.5V
0.00
-10.00
S21 (dB)
0.00
-20.00
Vctrl=1.2V
-30.00
-40.00
-50.00
1800
Vctrl=1.0V
1900
2000
2100
Frequency (MHz)
Figure 17. S21 Vs Frequency as function of Vctrl at Fc= 2GHz
2200
ALM-38140 Typical Over-Temperature With Phase Compensation Coil Performance
(Vsupply = 2.7V, Vctrl = 1V & 5V)
0.00
0.00
25°C
85°C
-40°C
-5.00
-10.00
S11 (dB)
S11 (dB)
-10.00
-5.00
-15.00
-20.00
-25.00
-30.00
-30.00
500
1000
1500 2000 2500
Frequency (MHz)
3000
0
3500
Figure 18. S11 (Return Loss) at Vctrl =1V vs Frequency vs Temperature
500
1000
1500 2000 2500
Frequency (MHz)
3000
3500
Figure 19. S11 (Return Loss) at Vctrl =5V vs Frequency vs Temperature
0.00
0.00
25°C
85°C
-40°C
-5.00
-5.00
-10.00
S22 (dB)
-10.00
S22 (dB)
25°C
85°C
-40°C
-35.00
0
-15.00
-20.00
-15.00
-20.00
-25.00
-25.00
-30.00
-30.00
-35.00
-35.00
0
500
1000
1500 2000 2500
Frequency (MHz)
3000
0.00
S21 (dB)
-20.00
-30.00
-40.00
-50.00
-60.00
0
500
1000
1500 2000 2500
Frequency (MHz)
3000
Figure 22. S21 at Vctrl=1V (Attenuation) vs Frequency vs Temperature
500
1000
1500 2000 2500
Frequency (MHz)
3000
3500
Figure 21. S22 (Return Loss) at Vctrl =5V vs Frequency vs Temperature
25°C
85°C
-40°C
-10.00
25°C
85°C
-40°C
0
3500
Figure 20. S22 (Return Loss) at Vctrl =1V vs Frequency vs Temperature
S21 (dB)
-20.00
-25.00
-35.00
-15.00
3500
0.00
-0.50
-1.00
-1.50
-2.00
-2.50
-3.00
-3.50
-4.00
-4.50
25°C
85°C
-40°C
0
500
1000
1500 2000 2500
Frequency (MHz)
3000
3500
Figure 23. S21 at Vctrl=5V (Insertion Loss) vs Frequency vs Temperature
ALM-38140 Typical Over-Temperature With Phase Compensation Coil Performance
(Vsupply = 2.7V, Vctrl = 1V & 5V)
40.00
20.00
Phase Shift (deg)
Phase Shift (deg)
0.00
-20.00
25°C
85°C
-40°C
-40.00
-60.00
0.00
20.00
30.00
Attenuation (dB)
0.00
40.00
-10.00
10.00
20.00
30.00
40.00
50.00
Attenuation (dB)
Figure 25. Phase shift vs Attenuation vs Temperature at 1900MHz
0.00
25°C
85°C
-40°C
-5.00
Return Loss (dB)
Return Loss (dB)
0.00
50.00
25°C
85°C
-40°C
-5.00
-15.00
-20.00
-25.00
-10.00
-15.00
-20.00
-25.00
-30.00
-30.00
0.00
10.00
20.00
30.00
Attenuation (dB)
40.00
0.00
50.00
10.00
20.00
30.00
50.00
Figure 27. Return loss vs Attenuation vs Temperature at 1900MHZ
50.00
50.00
25°C
85°C
-40°C
25°C
85°C
-40°C
45.00
IP1dB (dBm)
45.00
40.00
Attenuation (dB)
Figure 26. Return loss vs Attenuation vs Temperature at 900MHZ
IP1dB (dBm)
25°C
85°C
-40°C
0.00
-20.00
10.00
Figure 24. Phase shift vs Attenuation vs Temperature at 900MHz
40.00
35.00
40.00
35.00
30.00
30.00
25.00
25.00
0
10
20
30
Attenuation (dB)
40
Figure 28. Input P1dB vs Attenuation vs Temperature at 900MHZ
20.00
50
0
10
20
30
Attenuation (dB)
40
Figure 29. Input P1dB vs Attenuation vs Temperature at 1900MHZ
50
ALM-38140 Typical Over-Temperature With Phase Compensation Coil Performance
(Vsupply = 2.7V, Vctrl = 1V & 5V)
70.00
65.00
60.00
55.00
50.00
45.00
25°C
85°C
-40°C
65.00
IIP3 (dBm)
IIP3 (dBm)
70.00
25°C
85°C
-40°C
60.00
55.00
50.00
0
10
20
30
Attenuation (dB)
40
50
Figure 30. Input IP3 vs Attenuation vs Temperature at 900MHZ
45.00
0
10
20
30
Attenuation (dB)
40
50
Figure 31. Input IP3 vs Attenuation vs Temperature at 1900MHZ
Application Circuit
Vcontrol (1-5V)
Phase
Compensation
Coil
6
RF In
5
4
1
3
RF Out
Bias Circuitry
ALM-38140
2
Table 1. Recommended phase compensation coil values for
common frequency bands
Vsupply (2.7V)
Figure 32. Simplified Schematic
The phase compensation coil connected at Pin 5 (Linput)
and Pin 6 (Loutput) to further increase maximum attenuation and to improve phase shift.
10
Frequency
Ltune
Value
Size
Manufacturer Part No.
50MHz
3.9uH
0805
Coilcraft 0805LS-392XJLC
500MHz
220nH
0603
Toko LL2012-FR22K
1000MHz
180nH
0603
Coilcraft 0603HP-R18XJLW
2000MHz
62nH
0402
Murata LQW15AN62NG00
2500MHz
36nH
0402
Coilcraft 0402HP-36NXJLW
3500MHz
22nH
0402
Murata LQW15AN22NG00
Demo board Layout
0.6000
0.7000
1.1552
1.1552
0.4000
0.4000
DC Pin Configuration
Pin 1
– Vsupply
Pin 2, 3 – GND
Pin 4
– Vcontrol
1
2
3
4
* Dimensions in mm
Figure 33. Demo board Layout
1. PCB material used is 10 mils Rogers RO4350, with FR4 backing for mechanical strength.
2. The phase compensation coil values given in Table 1 are based on the trace layout on demo board shown in Figure 33. Trace layout different from
that specified in Figure 33, will require different values for the phase compensation coil.
3. Pad layout for phase compensation coil shown in Figure 33 is based on 0402 size.
11
Package Dimension Drawing
1.05±0.10
0.70
2x
0.60
0.07 all gaps
0.60
C'fer 45°x0.4
0.16
38140
WWYY
XXXX
0.73-4x
0.80-4x
0.40 sq-6x
1.90-2x
3.80±0.10
0.70
1.30-4x
3.80±0.10
1.30-2x
1.90-4x
Top View
Side View
Note :
1. ALL DIMENSIONS ARE IN MILIMETERS
2. DIMENSIONS ARE INCLUSIVE OF PLATING
3. DIMENSIONS ARE EXCLUSIVE OF MOLD FLASH AND METAL BURR.
4. Y REFER TO YEAR, M REFER TO MONTH & XXXX REFER TO LAST 4 DIGIT OF LOT NUMBER
12
Bottom View
0.10
(all edges)
PC Board and stencil design
Pin 1 Orientation
0.32mm x 45°
3.34-2x
1.26-3x
1.80
0.68-3x
0.40sq-6x
1.80
0.75
1.78-2x
1.60-6x
1.78
0.75
1.78
1.60-6x
1.00-3x
3.60
0.70-4x
3.48
2.52
0.70 0.70
1.80
3.60-4x
2.40
0.70 0.70
Pin 1 Orientation
0.4mm x 45°
0.36sq-6x
3.34
Stencil Opening
Land Pattern
3.60-4x
3.48
0.70 0.70
1.26-3x
1.00-3x
3.34-2x
3.60
1.60-6x
3.34
0.36sq-6x
0.40sq-6x
Combined Land Pattern & Stencil Opening
Device Orientation
REEL
USER FEED DIRECTION
CARRIER
TAPE
USER
FEED
DIRECTION
13
COVER TAPE
38140
WWYY
XXYY
38140
WWYY
XXYY
TOP VIEW
38140
WWYY
XXYY
END VIEW
Tape Dimensions
Dimension List
Annote
Milimeter
Ao
4.10
Bo
4.10
Ko
1.45
Pitch
8.00
Width
12.00
Notes:
1. Ao & Bo measured at 0.3mm above base of pocket.
2. 10 pitches cumulative tal. ±0.2mm.
Part Number Ordering Information
Part Number
No. of Devices
Container
ALM-38140-BLKG
100
Antistatic Bag
ALM-38140-TR1G
3000
13” Reel
14
Reel Dimensions (13” reel)
ESD Label
(See Below)
Recycle Symbol
Detail ‘X’
Embossed Line X2
90.0mm Length
Lines 147.0mm away from center point
Embossed ‘M’ 5.0mm Height
FRONT VIEW
Ø20.2 (Min)
25.65±1.75**
25.4±1.0*
Recycle Symbol
+0.5
Ø13.1 -0.2
2.2±0.5
See Detail ‘X’
FRONT
BACK
Ø100.0±0.5
Ø331.5 Max
Detail ‘X’
1.0
BACK VIEW
Detail ‘Y’
Slot 10.0±0.5(2x)
Slot 5.0±0.5***(1x)
For product information and a complete list of distributors, please go to our web site:
4.0
30.4*
Max
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2009 Avago Technologies. All rights reserved.
AV02-1987EN - July 7, 2009
Detail ‘Y’
(Slot Hole)