P-511-393(V:3) PD080SL1 Version :3.0 TECHNICAL MODEL SPECIFICATION NO : PD080SL1 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation Customer Date By PVI’s Confirmation FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com Confirmed By Prepared By The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 P-511-393(V:3) PD080SL1 Revision History Rev. V0.1 Eng. 黃秀晶 V0.2 黃秀晶 V0.3 黃秀晶 1.0 黃秀晶 2.0 黃秀晶 3.0 黃秀晶 Issued Date July 25,2006 Revised Content Preliminary Modify Page6 Oct 16,2006 5-1) TFT-LCD Panel Driving Modify Page4 Dec 15,2006 4. Mechanical Drawing of TFT-LCD Module Add Page26 16.Packing Jan 11, 2006 New Modify Page25 May 28, 2007 14. Reliability Test: LTOT/LTST from-20℃ to-25℃ Modify Page6 July 23, 2007 Modify connect pin The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 P-511-393(V:3) PD080SL1 TECHNICAL SPECIFICATION CONTENTS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ITEM Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Connections and Functions for Interface Pins Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Colors and Input Data Signals Input signal timing Power On Sequence Optical Characteristics Handling Cautions Reliability Test Packing PAGE 1 2 3 4 4 4 5 7 10 10 12 12 16 20 20 24 25 26 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 P-511-393(V:3) PD080SL1 1.Application This data sheet applies to a color TFT LCD module, PD080SL1.The module applies to notebook PC, sub-note-book PC and other OA product, which require high quality flat panel display. Prime View assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet. 2. Features . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display Colors：262,144 colors or 16,777,216 colors . Backlight driving DC/AC inverter not included in this module . Long Life Lamp 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Gray scale inversion direction Specifications 8 (diagonal) 800×(RGB)×600 262,144 162(H)×121.5 (V) 0.2025 (H)×0.2025 (V) Stripe 200(W)×152(H)×10.5(D) (typ.) 343+15 CCFL, 2 tubes Anti-Glare Normally white 6 (ref to Page 20 viewing angle ) Unit inch dot mm mm mm g o’clock The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 P-511-393(V:3) PD080SL1 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 P-511-393(V:3) Ethan Chen Frank Shin Frank Shin 2-4.00 1 20 (6.70) 2-4.00 2(HV) 1(HV) 4(LV) PD080SL1 01 PD080SL1 CN1 4-10.00 (30.9) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 P-511-393(V:3) PD080SL1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 P-511-393(V:3) PD080SL1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 P-511-393(V:3) PD080SL1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 P-511-393(V:3) PD080SL1 DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB always High or Low. 800 tc 640 tc DENB (tc: the period of sampling clock) 6. Absolute Maximum Ratings: Parameters Supply Voltage Input Signals Voltage Backlight Driving Voltage Backlight Driving Frequency Note 6-1: LVDS signal. Symbol VDD VIN VL FL MIN. -0.3 -0.3 25 MAX. +4.0 VDD+0.3 2000 80 GND=0V, Ta=25℃ Unit Remark V V Note 6-1 V KHz 7. Electrical Characteristics 7-1) Recommended Operating Conditions: Item Supply Voltage Current Dissipation Total power consumption LVDS Differential input high threshold LVDS Differential input low threshold High Input voltage for DPS & FPC signal Low Symbol Min. VDD 3.0 IDD 0.46 PDD VTH VTL -100 VIH 0.7VCC VIL 0 Typ. 3.3 153 0.51 - GND = 0V，Ta = 25℃ Max. Unit Remark 3.6 V mA Note 7-1 0.56 W 100 mV Note 7-2 VCC V 0.2VCC V Note 7-1 : To test the current dissipation of VDD, using the “color bars” testing pattern shown as below. 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black IDD current dissipation testing pattern Note7-2 : Please refers to THC63LVDM83A specification by Thin Corporation. This LCD module conforms to LVDS standard. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:10 P-511-393(V:3) PD080SL1 7-2) Recommended Driving Condition for Back Light Item Symbol Min. Typ. Max. Unit Lamp Current IFL 3 5 8 mA Lamp Driving Frequency Lamp Voltage Starting Voltage (25℃) (Reference Value) Starting Voltage (0℃) (Reference Value) Starting Voltage (-25℃) (Reference Value) FL VL Vs Vs Vs 25 - 40 510 - 80 960 1030 1120 - - 5.1 8 Total power consumption (at IFL=5mA) Remark 5mA : 420 cd/㎡ Note 7-3、Note 7-5 KHz Vrms IFL=5mA，Note 7-3 Vrms Note 7-4 Vrms Vrms W Note 7-6 Note 7-3 : The back-light driving waveform should be as closed to sine-wave as possible. In order to satisfy the quality of B/L , no matter use what kind of inverter , the each output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 7-4 : The “Starting voltage ” means the minimum voltage of inverter to turn on the CCFL. and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on. Note 7-5: Lamp current is measured with current meter for high frequency as shown below 1 2 4 TFT-LCD Module Inverter ~ A * Pin 4 is Vlow ** Current meter : Yokogawa 2016-01 Lamp current dissipation testing configuration Note 7-6 : Not including the efficiency of backlight DC/AC inverter 7-3) Backlight driving Connector type : “BHR-04VS-1” of Japan Solder less Terminal MFG Co. LTD PIN NO. 1 2 3 4 Symbol VL1 VL2 NC VL4 Description Input Voltage(High) Input Voltage(High) Remark Input Voltage(Low) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:11 P-511-393(V:3) PD080SL1 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1 st L ine R G B R G B R G B 2 nd L ine R G B R G B 3 rd L ine R G B 1 st P ixe l 8 0 0 th P ixe l 1 P ixe l = R G B 5 9 8 th L ine R G B R G B R G B 5 9 9 th L ine R G B R G B R G B R G B 6 0 0 th L ine R G B R G B 9. Display Colors and Input Data Signals The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:12 P-511-393(V:3) PD080SL1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:13 P-511-393(V:3) PD080SL1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:14 P-511-393(V:3) PD080SL1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:15 P-511-393(V:3) PD080SL1 10. Input signal timing: DENB pin have high priority than SYNC mode(HSVC+VSYNC). When IC only use SYNC pin, DENB pin have to connect to ground. (A) Timing Specifications (DENB Mode): Item Symbol Frame Cycling Period t1 Vertical Display Period t2 Horizontal Scanning Time t3 Horizontal Display Period Clock Cycle Clock High Level Time Clock Low Level Time Hold time Set-up time t4 t5 t6 t7 t8 t9 Min. 604 X t3 14 600 X t3 920 X t5 24 800 X t5 20 9.0 9.0 4.0 5.0 Typ. 628X t3 16.58 600 X t3 1056 X t5 26.4 800 X t5 25.0 - Max. 800 X t3 20 600 X t3 1064 X t5 33 800 X t5 31.25 - Unit ms μs ns ns ns ns ns Remark (B) Timing Specifications (SYNC Mode) Item HSYNC Period Symbol Hp Min. 24 920 Display period Hdp 800 Pulse width Hpw 12 Back-porch Hbp 12 Front-porch Hfp 42 Hpw+Hbp 214 Hsync-CLK Hhc 10 Vsync-Hsync Hvh 0 VSYNC Period Vp 14 (Frame cycling period) 604 Display period Vdp 600 Pulse width Vpw 2 Back-porch Vbp 0 Front-porch Vfp 1 Vpw+Vbp 27 Note 1: Frame cycling period is optimum in 16.58ms.(60HZ) Typ. 26.4 1056 800 128 86 42 214 0 16.58 628 600 4 23 1 27 Max. 33 1064 800 202 202 42 214 Tc-10 200 20 800 600 27 25 1 27 Unit us tc tc tc tc tc tc ns tc ms Hp Hp Hp Hp Hp Hp Remark Note 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:16 P-511-393(V:3) PD080SL1 (C)Timing Chart: t1 t2 CLK t3 t3 DENB R5~R0 G5~G0 B5~B0 X,0 X,1 X,2 X,3 X,Y X,597 X,598 X,599 tc t3 t4 CLK DENB 796,Y 798,Y R5~R0 G5~G0 B5~B0 0,Y 1,Y 2,Y 3,Y 4,Y 5,Y 6,Y X,Y 797,Y 799,Y The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:17 P-511-393(V:3) PD080SL1 Hp HSYNC Hpw Hdp Hbp Hfp R,G,B valid data CLK Hhc HSYNC HSYNC Hvh VSYNC The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:18 P-511-393(V:3) PD080SL1 Vp Vpw VSYNC Vdp Vfp Vbp R,G,B valid data t5 t6 t7 VIH(Min):0.8Vcc CLK VIL(Max):0.2Vcc t8 HYSNC VSYNC DENB R7-R0 G7-G0 B7-B0 t9 VIH(Min):0.8Vcc VALID DATA a Input Signal CenterLevel: 0.5Vcc VIL(Max):0.2Vcc b 0.5Vcc CLK Duty ( a ,b ) : 50 +10% The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:19 P-511-393(V:3) PD080SL1 11.Power On Sequence 3.0 V 0 s< t <35 m s 0 s< t <35 m s 3.0 V VDD Signal 2t 1 0<t 1 B acklight 1. The supply voltage for input signals should be same as VDD. 2. When the power is off , please keep whole signals (Hsync, Vsync, DENB, CLK, Data) low level or high impedance. 12. Optical Characteristics 12-1) Specification: Parameter Symbol θ Horizontal Viewing θ(to 6 ’clock) Angle Vertical θ(to 12 o’clock) Contrast Ratio Response time Rise Fall Luminance Luminance Uniformity White Chromaticity Lamp Life Time Cross Talk Ratio Condition CR≥10 MIN. 55 45 30 TYP. 60 50 35 MAX. - Unit deg deg deg 200 400 - - Note 12-2 - 15 25 30 50 ms ms Note 12-4 Tr Tf Optimum direction θ=0° φ=0° L θ=0°/φ=0° 390 420 - cd/㎡ U x y CTK θ=0°/φ=0° θ=0°/φ=0° 25℃ - 75 0.29 0.32 50000 - 80 0.32 0.35 - 0.35 0.38 3.5 % hrs % CR Ta = 25℃ Remarks Note 12-1 IFL=5mA Note 12-3 Note 12-5 IFL=5mA Note 12-6 All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:20 P-511-393(V:3) PD080SL1 Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration Note 12-1：The definitions of viewing angles are as follows. Lamp connector 12 o’clock θ 3 o’clock 9 o’clock φ Note 12-2 : The definition of contrast ratio CR = 6 o’clock Luminance at gray level 63 Luminance at gray level 0 Note 12-3：The typical luminance value is measured at lamp current 5 mA. The max luminance value is measured at lamp current 8 mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:21 P-511-393(V:3) PD080SL1 Note 12-4: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 12-5: The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 25% 50% 75% 25% 50% 75% The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:22 P-511-393(V:3) PD080SL1 ⏐YA-YB⏐ × 100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Note 12-6: Cross Talk (CTK) = Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:23 P-511-393(V:3) PD080SL1 13. Handling Cautions 13-1) Mounting of module 4. Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1. The noise from the backlight unit will increase. 4. The output from inverter circuit will be unstable. 4. In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and diets. It is recommended to peel off the laminator before use and taking care of static electricity. 13-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 13-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 13-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:24 P-511-393(V:3) PD080SL1 14. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electron Static Discharge Test Condition Ta = +80℃, 240 hrs Ta = -25℃, 240 hrs Ta =+80℃, 240 hrs Ta = -25℃, 240 hrs Ta = +60℃, 90%RH, 240 hrs (No Condensation) ℃ÅÆ +80℃, 100 Cycles -20 30 min 30 min Frequency：10 ~ 57 HZ , Amplitude：0.15 mm 58~500Hz, 1G Sweep time：11 min ; Test Period：3 hrs (1 hr for each direction of X, Y, Z) 80G, 6ms, X,Y, Z 1 times for each direction C=150pF,R=330Ω Contact=±8KV，Air=±15KV 10 times/terminal Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria] In the standard conditions, there is not display function NG issue occurred. (Including: line defect, no image). All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:25 P-511-393(V:3) PD080SL1 15.Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:26