PAA132 Dual Pole OptoMOS® Relays Blocking Voltage Load Current Max RON PAA132 50 600 1 Description PAA132 is a dual 50V, 600mA, 1Ω 1-Form-A relay. This performance leader features very high load current handling capabilities.The dual pole relays save board space by incorporating both relays in a single 8-pin package. Units V mA Ω Features • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • Certified to: • EN 60950 • EN 41003 Ordering Information Applications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security • Aerospace • Industrial Controls • Automotive Part # PAA132 PAA132S PAA132STR Description 8 Pin DIP (50/Tube) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1,000/Reel) Pin Configuration PAA132 Pinout AC/DC Configuration + Control - Switch #1 Ð Control - Switch #1 + Control - Switch #2 Ð Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON DS-PAA132-R01.6 www.clare.com 10%+ TOFF 1 PAA132 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Blocking Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Min - Typ Max Units - 1501 mW 50 mA 1 A 5 V 50 V - 8002 mW -40 -40 - 3750 VRMS +85 °C +125 °C - - +260 +220 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. °C °C Electrical Characteristics Parameter Conditions Output Characteristics @ 25°C Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current 10ms On-Resistance AC/DC Configuration IL=600mA DC Configuration IL=1.0A Off-State Leakage Current VL=50V Switching Speeds Turn-On IF=5mA, VL=10V Turn-Off IF=5mA, VL=10V Output Capacitance 50V; f=1MHz Input Characteristics @ 25°C Input Control Current IL=600mA Input Dropout Current Input Voltage Drop IF=10mA Reverse Input Current VR=5V Common Characteristics @ 25°C Input to Output Capacitance - 2 Symbol Min Typ Max Units IL IL ILPK - - 600 1.2 2.0 mA A A RON RON ILEAK - - 1.0 0.3 1 Ω Ω µA TON TOFF - - 100 5 2 - ms ms pF IF IF VF IR 5 0.4 0.9 - 0.7 1.2 - 50 1.4 10 mA mA V µA CI/O - 3 - pF www.clare.com R01.6 PAA132 PERFORMANCE DATA* PAA132 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC PAA132 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 600mADC) 35 PAA132 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 35 35 30 20 15 10 Device Count (N) 30 25 Device Count (N) Device Count (N) 30 25 20 15 10 5 0 1.22 1.23 1.24 0.69 0.70 LED Forward Voltage Drop (V) 10 0.71 0.72 0.73 0.74 90.3 0.75 PAA132 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC) 20 20 10 Device Count (N) 20 Device Count (N) 25 15 15 10 5 5 0.80 0.85 0.60 Load Current (A) Device Count (N) 30 25 20 15 10 5 0 0.30 0.35 0.40 0.45 0.50 0.55 0.60 94 Turn-On (ms) Blocking Voltage (VRMS) 96 92 90 88 86 84 82 80 0 20 40 10 0.75 0.80 0.85 0 1 1.1 60 Temperature (°C) 80 100 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 20 40 1.7 1.8 0.009 0.008 IF=10mA IF=5mA IF=10mA IF=5mA 0.007 0.006 0.005 0.004 0.003 0.002 60 0.001 80 100 120 -40 -20 0 60 Temperature (°C) 20 40 60 80 100 Temperature (°C) 5mA 0 1.5 PAA132 Leakage vs. Temperature (Measured Across Pins 6 &4) PAA132 Typical Turn-On vs. Temperature Load Current = 600mA -20 1.3 Turn-On (ms) Temperature (°C) PAA132 Typical Blocking Voltage vs. Temperature -10 0.70 0.65 One Poles Operating 0.6 0.55 Two Poles Operating 0.5 0.45 0.4 0.35 0.3 0.25 0.2 -40 -20 0 20 40 Turn-Off (ms) -40 0.65 PAA132 Maximum Load Current (AC/DC) vs. Temperature 35 91.4 15 LED Current (mA) LED Current (mA) PAA132 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) Load Current = 600mA IF =5mA 91.3 0 0.55 0.90 Leakage (µA) 0.75 80 100 Turn-Off (ms) 0.70 91.2 5 0 0 90.9 PAA132 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) Load Current = 600mA IF =5mA 25 0.65 90.7 Blocking Voltage (V) 25 0.60 90.5 On-Resistance (Ω) PAA132 Typical IF for Switch Operation Ambient Temperature = 25°C Load Current = 600mA Device Count (N) 15 0 0 1.25 20 5 5 1.21 25 0.70 0.65 0.60 0.55 0.50 0.45 0.35 0.30 0.25 0.20 0 -40 PAA132 Typical Turn-Off vs. Temperature Load Current = 600mA 5mA -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01.6 www.clare.com 3 PAA132 PERFORMANCE DATA* PAA132 Typical Turn-On vs. LED Forward Current (Load Current = 600mADC) 1.35 1.30 1.25 1.20 1.15 5mA 1.10 1.05 1.00 -40 -20 0 20 40 60 80 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 Temperature (°C) One Pole Operation 0.80 0.60 0.40 1.2 LED Current (mA) 1.20 PAA132 Typical IF for Switch Dropout vs. Temperature Load Current = 600mA 1.2 1.1 LED Current (mA) On-Resistance (Ω) 1.40 1.00 1.0 0.9 0.8 0.7 0.6 0.5 0.20 0.00 -20 0 20 40 60 80 -40 Temperature (°C) -20 0 20 40 60 80 100 0.9 0.8 0.7 0.6 0.5 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) PAA132 Typical Load Current vs. Load Voltage Ambient Temperature = 25°C IF =5mA 1.0 0 0 100 1.1 0.4 0.4 -40 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) PAA132 Typical IF for Switch Operation vs. Temperature Load Current = 600mA Two Pole Operation 1.60 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 LED Forward Current (mA) PAA132 Typical On-Resistance vs. Temperature (Load Current @600 mA AC/DC; IF=5mA) 1.80 PAA132 Typical Turn-Off vs. LED Forward Current (Load Current = 600mADC) Turn-Off (ms) 1.40 Turn-On (ms) LED Forward Voltage Drop (V) PAA132 LED Forward Voltage Drop vs. Temperature PAA132 Energy Rating Curve 1.2 1.0 0.8 Load Current (A) Load Current (mA) 1.0 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 0.6 0.4 0.2 0.8 1.0 0.6 0.4 0.2 0 0.2 0.4 Load Voltage (V) 0.6 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01.6 PAA132 MECHANICAL DIMENSIONS 8 Pin DIP Through Hole (Standard) PC Board Pattern (Top View) 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 2.540 ± 0.127 7.620 ± 0.254 (0.100 ± 0.005) (0.300 ± 0.010) 3.302 (8-0.031 DIA.) 7.620 ± 0.127 6.350 ± 0.127 (0.130) 7.239 TYP. 8-0.800 DIA. (0.100 ± 0.005) 9.144 ± 0.508 6.350 ± 0.127 (0.285 TYP.) (0.300 ± 0.005) (0.250 ± 0.005) (0.360 ± 0.020) (0.250 ± 0.005) 9.144 TYP. 7.620 ± 0.127 (0.360 TYP.) (0.300 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 8.077 ± 0.127 (0.318 ± 0.005 ) 9.652 ± 0.381 8 Pin DIP Surface Mount (“S” Suffix) PC Board Pattern (Top View) 2.540 ± 0.127 (0.380 ± 0.015) (0.100 ± 0.005) 2.540 ± 0.127 7.620 ± 0.254 (0.100 ± 0.005) (0.300 ± 0.010) 4.445 ± 0.127 (0.175 ± 0.005) 3.302 9.525 ± 0.254 6.350 ± 0.127 (0.130) 8.305 ± 0.127 (0.375 ± 0.010) (0.250 ± 0.005) (0.327 ± 0.005) 1.905 ± 0.127 0.635 TYP. (0.075 ± 0.005) 0.254 TYP. (0.025 TYP.) (0.010 TYP.) 0.457 ± 0.076 1.498 ± 0.127 (0.018 ± 0.003) (0.059 ± 0.005) 8.077 ± 0.127 (0.318 ± 0.005) Tape and Reel Packaging for Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. W = 16.30 max (0.004 MAX.) 1 8 (0.642 max) Bo = 10.30 (0.406) Top Cover Tape Embossed Carrier K = 4.2 Embossment P = 12.00 Ao = 10.30 (0.472) (0.406) User Direction of Feed 1 (0.165) K = 4.90 0 (0.193) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Dimensions mm (Inches) R01.6 www.clare.com 5 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PAA132-R01.6 ©Copyright 2003, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 5/21/03