CONEC 15

F
E
D
C
B
A
0,31
67 +- 0,45
61,11 +- 0,13
0,12
(5:1)
52,5 +- 0,05
0,2
D
6,1 +- 0,2
0,05
0,8
15,38 +- 0,37
0,39
D
n4
NOTE 2
C
JACKSCREW
C
10,81 +- 0,05
0,2
16,4 +- 0,1
0
LANYARD ROTATES FREELY
M3
4-40 UNC
NOTES:
NOTE 11
1. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL
2. TPE ETHYLENE PROPYLENE THERMOPLASTIC RUBBER SEAL
3. IP RATING: THE WATER RESISTANT CAP MUST BE MOUNTED
PROPERLY TO THE MATING CONNECTOR FOR IP 67
B
B
4. THREADED INSERT: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL
5. COLLAR: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL
6. JACKSCREW: STAINLESS STEEL 1.4305
7. WIRE ROPE: STAINLESS STEEL 1.4401
8. RETAINING WASHER: STAINLESS STEEL 1.4122
9. TERMINAL RING: UNINSULATED, COPPER ALLOY; min. 200µinTIN over 80µin NICKEL
10. MAXIMUM TORQUE VALUE FOR THREAD: 6in.LB
8
`
UNC 4-40
M3
15-000150
15-000200
F
35
6,
A
2x TERMINAL RING
n 3 ,2
n5
E
D
DO NOT ALTER CAD DRAWING BY HAND
10
WIRE ROPE n1,0
Part. No. for plug connector
THIS DRAWING MAY NOT BE COPIED OR
REPRODUCED IN ANY WAY, AND MAY NOT
BE PASSED ON TO A THIRD PARTY WITHOUT
WRITTEN PERMISSION.
OWNERSHIP AND COPYRIGHT OF CONEC GmbH
11. CONNECTOR IS PART MARKED: PART NO. CONEC ABC
C
tolerance
ISO 2768-m
dim. in mm
name
date
scale:
material:
title:
drawn 26.05.08
Petker
appd. 26.05.08
WATER RESISTANT SCREEN CAP
Fischer
50pos. FOR PLUG CONNECTOR
A
with threaded insert, jackscrew and wire rope
dwg no:
Inventor 10
DIN-
norm
d-old
R
a
date
name
B
A3
15K1A225
Origin
rev. description
2:1 (5:1)
SEE NOTES
part no:
sh: 1
see table
A