( 5 : 1 ) pcb hole drillings 24k1a1431 d-sub filter male 241

F
E
D
C
B
A
24,99 +- 0,13
0,12
5,49 `0,1
0,5
(5:1)
D
4,5
1
10,28 +- 0,47
0,23
1,42 `0,1
D
2,84 `0,1
2,74 `0,1
n3,1 `0,1 (2x)
n1 +- 0,1
0 (9x)
P.C.B. HOLE DRILLINGS
(P.C.B. TOP SIDE)
0,12
0,9
4,11 `0,1
6 +- 0,18
1,37 `0,1
30,89 +- 0,3
0,46
24,99 +- 0,13
0,12
12,6 +- 0,33
0,43
C
8,26 +- 0,22
0,03
16,84 +- 0,2
0,05
C
2,55 REF.
10°
n0,6 `0,05 (9x)
241o10170X
CONEC ABC
4-40 UNC
B
NOTES:
SEE NOTE 11
B
1. RoHS COMPLIANT
2. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 260°C FOR 5 SEC.
AND SOLDER PREHEAT 100°C FOR 30 SEC.)
3. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL
4. INSULATOR: HIGH TEMPERATURE PLASTIC UL 94 V-0; BLACK
5. CONTACTS: COPPER ALLOY; PLATING (SEE PART NO.):
o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE)
o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL
o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL
SOLDER TAILS PRETINNED
6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL
7. COLLARS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL
8. CAPACITANCE: 1300pF `20%
9. DIELECTRIC WITHSTANDING VOLTAGE: 424 VDC
10. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB
Directive 2002/95/EC RoHS compliant
F
E
DO NOT ALTER CAD DRAWING BY HAND
A
THIS DRAWING MAY NOT BE COPIED OR
REPRODUCED IN ANY WAY, AND MAY NOT
BE PASSED ON TO A THIRD PARTY WITHOUT
WRITTEN PERMISSION.
OWNERSHIP AND COPYRIGHT OF CONEC GmbH
11. CONNECTOR IS PART MARKED: 241 o10170X CONEC ABC
scale:
material:
tolerance
2:1 (5:1)
SEE NOTES
dim. in mm
date
drawn 07.03.13
Henneboel
appd. 08.03.13
Fischer
A
title:
name
D-SUB FILTER MALE
9pos. SOLDER PIN STRAIGHT
with threaded insert
dwg no:
norm
d-old
24K1A1431
R
a
Original
rev. description
D
date
part no:
name
C
B
241o10170X
DINA3
sh: 1
(see note 5)
A