F E D C B A 0,31 67 +- 0,45 61,11 +- 0,13 0,12 (5:1) 52,81 +- 0,12 0,13 D +0 6 - 0,3 0,9 15,38 +- 0,37 0,39 D n4 JACKSCREW C NOTE 2 C 16,4 +- 0,1 0 LANYARD ROTATES FREELY M3 4-40 UNC NOTES: NOTE 11 1. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 2. TPE ETHYLENE PROPYLENE THERMOPLASTIC RUBBER SEAL 3. IP RATING: THE WATER RESISTANT CAP MUST BE MOUNTED PROPERLY TO THE MATING CONNECTOR FOR IP 67 B B 4. THREADED INSERT: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 5. COLLAR: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 6. JACKSCREW: STAINLESS STEEL 1.4305 7. WIRE ROPE: STAINLESS STEEL 1.4401 8. RETAINING WASHER: STAINLESS STEEL 1.4122 9. TERMINAL RING: UNINSULATED, COPPER ALLOY; min. 200µinTIN over 80µin NICKEL 10. MAXIMUM TORQUE VALUE FOR THREAD: 6in.LB 8 10 11. CONNECTOR IS PART MARKED: PART NO. CONEC ABC A F UNC 4-40 M3 15-000050 15-000100 2x TERMINAL RING n 3 ,2 n5 E D DO NOT ALTER CAD DRAWING BY HAND 35 6, Part. No. for socket connector THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH ` WIRE ROPE n1,0 C tolerance ISO 2768-m dim. in mm name date scale: material: title: drawn 23.05.08 Petker appd. 26.05.08 WATER RESISTANT SCREEN CAP Fischer 50pos. FOR SOCKET CONNECTOR A with threaded insert, jackscrew and wire rope dwg no: Inventor 10 DIN- norm d-old R a date name B A3 15K1A224 Origin rev. description 2:1 (5:1) SEE NOTES part no: sh: 1 see table A