THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS ABSOLUTE MAXIMUM RATINGS PARAMETER TABLE 1.0 UNITS Storage Temperature Supply Voltage (Vcc) MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C -0.5 - 7.0 Vdc MINIMUM NOMINAL MAXIMUM UNITS NOTE 16.384 -20 0 - MHz ppm °C 1 - 200 20 70 Vdc NOTE TABLE 2.0 Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS MINIMUM 2.275 45 - NOMINAL 50 - MAXIMUM 50 1.68 55 1 UNITS Ohms Vdc Vdc % nS PECL OUTPUT CHARACTERISTICS TABLE 3.0 PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% (Voh) (Vol) FPLD54T DESCRIPTION OPERATING SPECIFICATIONS PARAMETER CW 0701 FPLD54T 155.52M SURFACE MOUNT 3.3V LVPECL CLOCK NOTE 2 The Connor-Winfield FPLD54T is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±20ppm overall stability. Operating at 3.3V supply voltage, the FPLD54T provides LVPECL Differential Outputs. 3 FEATURES PACKAGE CHARACTERISTICS Package PROCESS RECOMMENDATIONS Solder Reflow Wash TABLE 4.0 Non-hermetic package consisting of an FR4 subst rate with grounded metal cover. 3.3V OPERATION LVPECL DIFFERENTIAL OUTPUTS TABLE 5.0 The component solder used internal to this device has a m elting point of 221°C. The peak temperature inside the device should be less than or equal to 220°C for a maximum of 10 seconds Ultrasonic cleaning is not recommended. LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: ±20ppm TEMPERATURE RANGE: 0 to 70°C SURFACE MOUNT PACKAGE Notes 1) Includes calibration, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 3) Duty Cycle measured at 1.977V TAPE AND REEL PACKAGING ORDERING INFORMATION FPLD54T - 155.52MHz CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: INT Ec159 PAGE 1 OF 2 REV: 00 DATE: 6/4/02 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS CW FPLD54T 155.52M N/C N/C GROUND Q OUTPUT Q OUTPUT Vcc Dimensional Tolerance: ±.005” (.127mm) 80% 50% 20% 2 N/C N/C Specifications subject to change without notice. DATA SHEET #: INT Ec159 PAGE 2 OF 2 REV: 00 DATE: 6/4/02 aCopyright 2001 Connor-Winfield all rights reserved.