Compact Medium Power Amplif ier for Test and Measurement Applications 1.0 to 2.5 GHz The VZL-6943J2 1.0 to 2.5 GHz 250 Watt TWT Compact Medium Power Amplifier. Global Applications Five rack units tall (8.75 in/222 mm). 230 VAC operation. Meets International Safety Standard EN61010 and Electromagnetic Compatibility 89/336/EEC. Versatile Easy to Maintain Modular design and built-in fault diagnostic capability backed by CPI’s worldwide 24-hour customer support network that includes 9 regional factory Service Centers. Medium An integral solid state preamplifier and IEEE interface are included as standard features. Compact Ultra wide-band, automatic fault recycle, user friendly microprocessor-controlled logic with integrated computer interface, digital metering, electronic variable attenuation, soft fail when subjected to extreme load SWR conditions, quiet operation for a laboratory environment. 250W Compact Communications & Power Industries Canada, Inc. 45 River Drive / Georgetown, Ontario / Canada L7G 2J4 Hot Line Telephone: 1-800-267-JETSAT TEL: 905-877-0161 / FAX: 905-877-5327 E-MAIL: [email protected] WEB: www.cpii.com/cmp Amplif ier wireless solutions Power INSTRUMENTATION AMPLIFIERS 1.0 to 2.5 GHz SPECIFICATIONS, VZL-6943J2 Electrical Environmental (Operating) TWT Model Number 0102181700 Ambient Temperature -10° to + 40°C operating Frequency 1.0 to 2.5 GHz Relative Humidity 95% non-condensing Altitude 10,000 ft. with standard adiabatic derating of 2°C/1000 ft., operating Shock and Vibration As normally encountered in a protected engineering laboratory environment 65 dBA @ 3 ft. from amplifier Output Power TWT Flange OPTIONS: 250W min. (typical 300W) 225W min. (typical 275W) Gain • Input Isolator (-1 dB gain) 54 dB min. at rated power output; 56 dB min. at small signal RF Level Adjust 0 to 20 dB Acoustic Noise • Remote Control Panel Gain Stability ±0.25 dB/24hr max. (after 30 min. warmup and at constant drive and temperature) Mechanical • 115 VAC External Step-Up Transformer Cooling (TWT) Forced air with integral blower Rear air intake & exhaust Gain Variation 18 dB pk-to-pk, typical Input VSWR 2.5:1 max. 2.0:1 max. (with optional input isolator) RF Connectors Input Output Type-N Female Type-N Female Output VSWR 2.5:1 typical RF Output Monitor Type-N Female, -50 dB nominal Load VSWR 1.5:1 max. for full spec compliance 2.0:1 max. continuous operation Dimensions (W x H x D) 19 x 8.75 x 26 in (483 x 222 x 661 mm) Residual AM -50 dBc below 10 kHz -20 (1.3 +log F kHz) dBc, 10 kHz to 500 kHz -85 dBc above 500 kHz Weight 110 lbs/50 kg Safety EN61010 Phase Noise Meets IESS 308/309 with 3 dB margin Noise and Spurious -60 dBw/4 kHz Noise Figure 15 dB max. Harmonic Content -3 dBc typical at lower band edge decreasing to -15 dBc typical at upper band edge. Primary Power Voltage Frequency 220-240 VAC ±10%, single phase 47-63 Hz Power Consumption 2.6 kVA typical 3.0 kVA max. Inrush Current 200% max. KEEPING YOU ON THE AIR not up in the air wireless solutions For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 47, ISSUE 4 7/99 2500 INSTRUMENTATION AMPLIFIERS