3.25 kW Compact Pulse Amplifier for Test and Measurement Applications 1 2 . 0 to 1 8 .0 GHz The VZU-3530J1 Compact Global Applications Eight rack-units tall (14 in/356 mm). 230 VAC operation. Designed to meet International Safety Standard EN61010 and Electromagnetic Compatibility 2004/108/EC. Versatile An integral solid state preamplifier and IEEE interface are included as standard features. Easy to Maintain Modular design and built-in fault diagnostic capability backed by CPI’s worldwide 24-hour customer support network that includes twenty regional factory service centers. Communications & Power Industries Canada, Inc. 45 River Drive Georgetown, Ontario CANADA L7G2J4 tel: +1 (905) 877-0161 fax: +1 (905) 877-5327 e-mail: [email protected] www.cpii.com/satcom 3.25 kW Compact Pulsed Amplifier Wide band, automatic fault recycle, user-friendly microprocessor-controlled logic with integrated computer interface, digital metering, and quiet operation suitable for laboratory environments. 12.0 to 18.0 GHz 3250 Watt TWT Compact Pulsed Amplifier 1 2 .0 t o 18 .0 GH z SPECIFICATIONS, VZU-3530J1 Environmental Electrical Frequency 12.0 to 18.0 GHz Ambient Temperature Output Peak Power (min.) TWT Flange -10° to +40°C operating -40° to +70°C non-operating 3500 W 3250 W Relative Humidity 95% non-condensing Altitude 10,000 ft. with standard adiabatic derating of 2°C/1000 ft., operating; 40,000 ft., non-operating Shock and Vibration As normally encountered in a protected laboratory environment Gain OPTIONS: • Remote Control Panel • Input Isolator (-1 dB Gain) 65 dB min. at rated power (with no RF options); 67 dB min. at small signal (with no RF options); deduct one dB of gain from the above minimums for each RF option Gain Adjustment Range 20 dB min. Gain Stability ±0.25 dB/24hr max. (after 30 minute warmup and at constant drive and temp.) Input VSWR 2.5:1 typ; 1.5:1 typ. with optional input isolator Output VSWR Load VSWR Mechanical Cooling (TWT) Forced air with integral blower Rear air intake & exhaust; 0.10" water max. external pressure loss allowable 2.5:1 typ. RF Input Connection Type N female 1.5:1 max. for full spec. compliance; Peak output pulse power foldback protection at peak reflected power. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off. RF Output Connection WR-62 waveguide flange Dimensions (W x H x D) 19 x 14 x 26 in. (483 x 356 x 661 mm) excluding connectors, fans, handles and exhaust duct Weight 150 lbs (68 kg) max. Heat Dissipation 2200 watts max. Phase Noise 0.5°rms asynchronous ripple Safety EN61010 Pulse Width 0.07 to 50 µs Acoustic Noise 65 dBA @ 3 ft. from amplifier PRF 50 kHz max, 100 kHz max. available as option Duty Cycle 6% max. Delay 400 ns typ. Droop 0.5 dB over 50 µs NPO -10 dBm/MHz Beam On; -110 dBm/MHz Beam Off Primary Power 220 - 240 VAC ±10%, single phase 47- 63 Hz Power Consumption 2.2 kVA typ. 2.5 kVA max. Filament Voltage Reduction of 10% in standby for extended TWT life (available as option) Inrush Current 200% max. This product is subject to the U.S. International Traffic in Arms Regulations (ITAR). Sale of this product is subject to US Government approval. In accordance with part 126.1 of the ITAR, it is the policy of the United States to deny licenses and other approvals for the sales, exports/ imports, and or transfer of items subject to the ITAR destined for or originating in certain countries in which the U.S. maintains an arms embargo. Certificate Number: 30515 For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 255, ISSUE 7 DEC 13 PDF