Order this document by MPSH10/D NPN Silicon COLLECTOR 3 Motorola Preferred Devices 1 BASE 2 EMITTER 1 MAXIMUM RATINGS 2 Rating Symbol Value Unit Collector – Emitter Voltage VCEO 25 Vdc Collector – Base Voltage VCBO 30 Vdc Emitter – Base Voltage VEBO 3.0 Vdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 350 2.8 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.0 8.0 Watts mW/°C TJ, Tstg – 55 to +150 °C Characteristic Symbol Max Unit Thermal Resistance, Junction to Ambient RqJA 357 °C/W Thermal Resistance, Junction to Case RqJC 125 °C/W Operating and Storage Junction Temperature Range 3 CASE 29–04, STYLE 2 TO–92 (TO–226AA) THERMAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit Collector – Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) V(BR)CEO 25 — Vdc Collector – Base Breakdown Voltage (IC = 100 mAdc, IE = 0) V(BR)CBO 30 — Vdc Emitter – Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO 3.0 — Vdc Collector Cutoff Current (VCB = 25 Vdc, IE = 0) ICBO — 100 nAdc Emitter Cutoff Current (VEB = 2.0 Vdc, IC = 0) IEBO — 100 nAdc OFF CHARACTERISTICS ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Characteristic Symbol Min Max Unit hFE 60 — — Collector – Emitter Saturation Voltage (IC = 4.0 mAdc, IB = 0.4 mAdc) VCE(sat) — 0.5 Vdc Base – Emitter On Voltage (IC = 4.0 mAdc, VCE = 10 Vdc) VBE(on) — 0.95 Vdc fT 650 — MHz Ccb — 0.7 pF 0.35 0.6 0.65 0.9 — 9.0 ON CHARACTERISTICS DC Current Gain (IC = 4.0 mAdc, VCE = 10 Vdc) SMALL– SIGNAL CHARACTERISTICS Current – Gain — Bandwidth Product (IC = 4.0 mAdc, VCE = 10 Vdc, f = 100 MHz) Collector–Base Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Common–Base Feedback Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Collector Base Time Constant (IC = 4.0 mAdc, VCB = 10 Vdc, f = 31.8 MHz) Crb MPSH10 MPSH11 rb’Cc pF ps PACKAGE DIMENSIONS A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L F SEATING PLANE K D J X X G H V C 1 SECTION X–X N N CASE 029–04 (TO–226AA) ISSUE AD DIM A B C D F G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.115 ––– 0.135 ––– STYLE 2: PIN 1. BASE 2. EMITTER 3. COLLECTOR MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 2.93 ––– 3.43 –––