TSAL4400 Vishay Telefunken GaAs/GaAlAs IR Emitting Diode in ø 3 mm (T–1) Package Description 94 8488 TSAL4400 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology, molded in clear, bluegrey tinted plastic packages. In comparison with the standard GaAs on GaAs technology these emitters achieve about 100 % radiant power improvement at a similar wavelength. The forward voltages at low current and at high pulse current roughly correspond to the low values of the standard technology. Therefore these emitters are ideally suitable as high performance replacements of standard emitters. Features D D D D D D D D Extra high radiant power Low forward voltage Suitable for high pulse current operation Standard T–1 (ø 3 mm) package Angle of half intensity ϕ = ± 25° Peak wavelength lp = 940 nm High reliability Good spectral matching to Si photodetectors Applications Infrared remote control units Free air transmission systems Infrared source for optical counters and card readers Absolute Maximum Ratings Tamb = 25_C Parameter Reverse Voltage Forward Current Peak Forward Current Surge Forward Current Power Dissipation Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature Thermal Resistance Junction/Ambient Document Number 81006 Rev. 3, 20-May-99 Test Conditions tp/T = 0.5, tp = 100 ms tp = 100 ms t x 5sec, 2 mm from case Symbol VR IF IFM IFSM PV Tj Tamb Tstg Tsd RthJA Value 5 100 200 1.5 210 100 –55...+100 –55...+100 260 350 Unit V mA mA A mW °C °C °C °C K/W www.vishay.de • FaxBack +1-408-970-5600 1 (5) TSAL4400 Vishay Telefunken Basic Characteristics Tamb = 25_C Parameter Forward Voltage g Test Conditions IF = 100 mA, tp = 20 ms IF = 1 A, tp = 100 ms IF = 100mA VR = 5 V VR = 0 V, f = 1 MHz, E = 0 IF = 100 mA, tp = 20 ms IF = 1.0 A, tp = 100 ms IF = 100 mA, tp = 20 ms IF = 20 mA Temp. Coefficient of VF Reverse Current Junction Capacitance Radiant Intensity y Radiant Power Temp. Coefficient of fe Angle of Half Intensity Peak Wavelength Spectral Bandwidth Temp. Coefficient of lp Rise Time Fall Time Virtual Source Diameter Symbol VF VF TKVF IR Cj Ie Ie fe Min Typ 1.35 2.6 –1.3 10 25 30 240 35 –0.6 ±25 940 50 0.2 800 800 2.8 16 135 TKfe ϕ lp Dl IF = 100 mA IF = 100 mA IF = 100 mA IF = 100 mA IF = 100 mA method: 63% encircled energy Max 1.6 3 TKlp tr tf ø Unit V V mV/K mA pF mW/sr mW/sr mW %/K deg nm nm nm/K ns ns mm Typical Characteristics (Tamb = 25_C unless otherwise specified) 250 IF – Forward Current ( mA ) PV – Power Dissipation ( mW ) 250 200 150 RthJA 100 50 200 150 100 0 50 0 0 94 7957 e RthJA 20 40 60 80 100 Tamb – Ambient Temperature ( °C ) Figure 1. Power Dissipation vs. Ambient Temperature www.vishay.de • FaxBack +1-408-970-5600 2 (5) 0 96 11986 20 40 60 80 100 Tamb – Ambient Temperature ( °C ) Figure 2. Forward Current vs. Ambient Temperature Document Number 81006 Rev. 3, 20-May-99 TSAL4400 Vishay Telefunken 1000 I e – Radiant Intensity ( mW/sr ) I F – Forward Current ( A ) 101 IFSM = 1 A ( Single Pulse ) tp / T = 0.01 0.05 100 0.1 0.5 1.0 10–1 10–2 96 11987 10 1 0.1 10–1 100 101 tp – Pulse Duration ( ms ) 102 100 104 Figure 6. Radiant Intensity vs. Forward Current 104 Fe – Radiant Power ( mW ) 1000 103 102 tp = 100 ms tp / T = 0.001 101 100 100 10 1 0.1 0 1 2 4 3 VF – Forward Voltage ( V ) 13600 100 101 102 103 IF – Forward Current ( mA ) 13602 Figure 4. Forward Current vs. Forward Voltage 104 Figure 7. Radiant Power vs. Forward Current 1.2 1.6 1.1 1.2 IF = 10 mA I e rel ; Fe rel V Frel – Relative Forward Voltage 101 102 103 IF – Forward Current ( mA ) 14309 Figure 3. Pulse Forward Current vs. Pulse Duration IF – Forward Current ( mA ) 100 1.0 IF = 20 mA 0.8 0.9 0.4 0.8 0.7 0 94 7990 e 20 40 60 80 Tamb – Ambient Temperature ( °C ) Figure 5. Relative Forward Voltage vs. Ambient Temperature Document Number 81006 Rev. 3, 20-May-99 0 –10 0 10 100 94 7993 e 50 100 140 Tamb – Ambient Temperature ( °C ) Figure 8. Rel. Radiant Intensity\Power vs. Ambient Temperature www.vishay.de • FaxBack +1-408-970-5600 3 (5) TSAL4400 Vishay Telefunken 0° I e rel – Relative Radiant Intensity Fe rel – Relative Radiant Power 1.25 1.0 0.75 0.5 0.25 IF = 100 mA 0 890 14291 940 990 l – Wavelength ( nm ) Figure 9. Relative Radiant Power vs. Wavelength 10 ° 20 ° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0.6 0.4 0.2 0 0.2 0.4 0.6 14328 Figure 10. Relative Radiant Intensity vs. Angular Displacement Dimensions in mm 95 10913 www.vishay.de • FaxBack +1-408-970-5600 4 (5) Document Number 81006 Rev. 3, 20-May-99 TSAL4400 Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 Document Number 81006 Rev. 3, 20-May-99 www.vishay.de • FaxBack +1-408-970-5600 5 (5)