TI SN74ALS810

SDAS160 − D2837, MARCH 1984 − REVISED OCTOBER 1988
•
•
SN54ALS810, SN54AS810 . . . J PACKAGE
SN74ALS810, SN74AS810 . . . D OR N PACKAGE
Package Options include Plastic “Small
Outline” Packages, Ceramic Chip Carriers,
and Standard Plastic and Ceramic 300-mil
DIPs
(TOP VIEW)
1A
1B
1Y
2A
2B
2Y
GND
Dependable Texas Instruments Quality and
Reliability
description
These devices contain four independent
Exclusive-NOR gates. They perform the Boolean
functions Y = A + B = (A + B)•(A + B) in positive
logic.
1
14
2
13
3
12
4
11
5
10
6
9
7
8
VCC
4B
4A
4Y
3B
3A
3Y
SN54ALS810, SN54AS810 . . . FK PACKAGE
(TOP VIEW)
1B
1A
NC
VCC
4B
A common application is a true/complement
element. If one of the inputs is high, the other input
will be reproduced in true form at the output. If one
of the inputs is low, the signal on the other input will
be reproduced inverted at the output.
1Y
NC
2A
NC
2B
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
4A
NC
4Y
NC
3B
2Y
GND
NC
3Y
3A
The SN54ALS810 and SN54AS810 are
characterized for operation over the full military
temperature range of − 55°C to 125°C. The
SN74ALS810 and SN74AS810 are characterized
for operation from 0°C to 70°C.
4
logic symbol†
NC−No internal connection
1A
1B
1
2
4
2A
5
2B
9
3A
10
3B
12
4A
13
4B
=1
3
6
8
11
1Y
FUNCTION TABLE
(each gate)
2Y
INPUTS
B
A
3Y
L
L
H
H
4Y
L
H
L
H
OUTPUT
Y
H
L
L
H
† This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
Pin numbers shown are for D, J, and N packages.
Copyright  1988, Texas Instruments Incorporated
5BASIC
!"#$%! & '("")% $& ! *(+,'$%! -$%).
"!-('%& '!!"# %! &*)''$%!& *)" %/) %)"#& ! )0$& &%"(#)%&
&%$-$"- 1$""$%2. "!-('%! *"!')&&3 -!)& !% )')&&$",2 ',(-)
%)&%3 ! $,, *$"$#)%)"&.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77001
•
1
SDAS160 − D2837, MARCH 1984 − REVISED OCTOBER 1988
exclusive-NOR logic
An Exclusive-NOR gate has many applications, some of which can be represented better by alternative logic
symbols.
EXCLUSIVE-NOR
=1
These are five equivalent Exclusive-NOR symbols valid for an ’ALS810 gate in positive logic; negation may be
shown at any one port or at all three of them.
LOGIC IDENTITY ELEMENT
=
The output is active (high) if all
inputs stand at the same logic level
(i.e., A = B).
2
EVEN-PARITY
2k
2k + 1
The output is active (high) if an
even
number of inputs (i.e., only 0 or 2)
are active.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77001
•
ODD-PARITY ELEMENT
The output is active (low) if an odd
number of inputs (i.e., only 1 of
the 2) are active.
SDAS160 − D2837, MARCH 1984 − REVISED OCTOBER 1988
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Operating free-air temperature range: SN54ALS810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55°C to 125°C
SN74ALS810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
recommended operating conditions
SN54ALS810
VCC
VIH
Supply voltage
VIL
IOH
Low-level input voltage
IOL
TA
Low-level output current
SN74ALS810
MIN
NOM
MAX
MIN
NOM
MAX
4.5
5
5.5
4.5
5
5.5
High-level input voltage
2
2
High-level output current
−55
V
V
0.7
0.8
V
−0.4
−0.4
mA
8
mA
70
°C
4
Operating free-air temperature
UNIT
125
0
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
SN54ALS810
TYP† MAX
TEST CONDITIONS
VIK
VOH
VCC = 4.5 V,
VCC = 4.5 V to 5.5 V,
II = − 18 mA
IOH = − 0.4 mA
VOL
VCC = 4.5 V,
VCC = 4.5 V,
IOL = 4 mA
IOL = 8 mA
II
IIH
VCC = 5.5 V,
VCC = 5.5 V,
VI = 7 V
VI = 2.7 V
IIL
IO‡
VCC = 5.5 V,
VCC = 5.5 V,
VI = 0.4 V
VO = 2.25 V
SN74ALS810
TYP†
MAX
MIN
MIN
−1.5
VCC−2
−1.5
VCC−2
0.25
−30
0.4
UNIT
V
V
0.25
0.4
0.35
0.5
V
0.1
0.1
20
20
µA
−0.1
−0.1
mA
−112
mA
−112
−30
mA
ICC
VCC = 5.5 V,
A at 4.5 V, B at 0 V
5
7.5
5
7.5
mA
† All typical values are at VCC = 5 V, TA = 25°C.
‡ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
switching characteristics (see Note 1)
VCC = 4.5 V to 5.5 V,
CL = 50 pF,
PARAMETER
FROM
TO
(INPUT)
(OUTPUT)
tPLH
tPHL
A or B
(other input low)
tPLH
tPHL
(other input high)
Y
A or B
Y
RL = 500 Ω,
TA = MIN to MAX§
SN54ALS810 SN74ALS810
MIN
MAX
MIN
MAX
5
23
5
20
3
17
3
14
5
21
5
18
3
17
3
14
UNIT
ns
ns
§ The conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
NOTE 1: Load circuit and voltage waveforms are shown in Section 1 of the ALS/AS Logic Data Book, 1986.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77001
•
3
SDAS160 − D2837, MARCH 1984 − REVISED OCTOBER 1988
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Operating free-air temperature range: SN54AS810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55°C to 125°C
SN74AS810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
recommended operating conditions
SN54AS810
SN74AS810
MIN
NOM
MAX
MIN
NOM
MAX
4.5
5
5.5
4.5
5
5.5
UNIT
VCC
VIH
Supply voltage
VIL
IOH
Low-level input voltage
0.8
0.8
V
High-level output current
−2
−2
mA
IOL
TA
Low-level output current
20
mA
70
°C
High-level input voltage
2
2
V
20
Operating free-air temperature
−55
125
V
0
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
VIK
VOH
VCC = 4.5 V,
VCC = 4.5 V to 5.5 V,
II = − 18 mA
IOH = − 2 mA
VOL
II
VCC = 4.5 V,
VCC = 5.5 V,
IOL = 20 mA
VI = 7 V
IIH
IIL
IO‡
VCC = 5.5 V,
VCC = 5.5 V,
VI = 2.7 V
VI = 0.4 V
VCC = 5.5 V,
VCC = 5.5 V,
VO = 2.25 V
VI = 4.5 V
ICCH
ICCL
MIN
SN54AS810
TYP† MAX
SN74AS810
TYP† MAX
MIN
−1.5
−1.5
VCC −2
VCC −2
0.35
0.5
0.5
V
0.1
mA
20
20
µA
−0.5
−0.5
mA
− 112
mA
28
mA
−112
20
V
V
0.35
0.1
−30
UNIT
−30
28
20
VCC = 5.5 V,
VIA= 4.5 V, VIB = 0 V
29
41
29
41
mA
† All typical values are at VCC = 5 V, TA = 25°C.
‡ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
switching characteristics (see Note 1)
VCC = 4.5 V to 5.5 V,
CL = 50 pF,
PARAMETER
FROM
TO
(INPUT)
(OUTPUT)
tPLH
tPHL
A or B
(other input low)
tPLH
tPHL
(other input high)
Y
A or B
Y
RL = 500 Ω,
TA = MIN to MAX§
SN54AS810
SN74AS810
MIN
MAX
MIN
MAX
1.6
6.5
1.6
5.1
2.2
5.8
2.2
5.4
3
6.3
3
5.8
2.3
9
2.3
9
§ The conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
NOTE 1: Load circuit and voltage waveforms are shown in Section 1 of the ALS/AS Logic Data Book, 1986.
4
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77001
•
UNIT
ns
ns
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated