LED - Lamp ELD-625-323 rev. 04 Radiation Type Technology Case Amber Standard AlInGaP/GaAs 3 mm plastic lens Description Amber LED in standard 3 mm housing, small package allows compact design, housing without standoff leads 3,4 - 0,3 4,8 - 0,4 2,54 2,9 - 2,0 0,6 - 0,2 Anode Note: Special packages with standoff available on request Applications 1,8 -0,6 3,7 - 0,2 0,6 - 0,2 29 - 2,0 6,1 - 0,4 Illumination, safety equipment, automation, optical sensors Maximum Ratings Tamb = 25°C, unless otherwise specified Test сonditions Parameter Symbol Value Unit IF 30 mA IFM 300 mA PD 120 mW Operating temperature range Tamb -20 to +85 °C Storage temperature range Tstg -30 to +100 °C Junction temperature TJ 100 °C Typ Max Unit 2.0 2.4 V Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Symbol Min VF Reverse voltage IR = 10 µA VF 5 Radiant power* IF = 20 mA Φe 1.3 1.8 mW Luminous intensity* IF = 20 mA Ιv 600 850 mcd Peak wavelength IF = 20 mA λp 620 625 Dominant wavelength IF = 20 mA λD 616 nm Spectral bandwidth at 50% IF = 20 mA ∆λ0.5 18 nm Viewing angle IF = 20 mA ϕ 20 deg. Switching time IF = 20 mA tr, tf 80 ns V 630 nm *measured after 30s current flow Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545