EUROQUARTZ GENERAL PRODUCT SPECIFICATION OSCILLATORS - PROGRAMMABLE Telephone: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] Web: www.euroquartz.co.uk SPG SERIES 8 pin Dual-in-Line PROGRAMMABLE OSCILLATORS Page 1 of 4 57 frequencies programmable from one device Low current consumption Readily mounted 16 pin DIP General Specification Frequency range: 0.00027Hz to 1.0MHz Supply Voltage (Vdd-GND): ±-0.3V to -7.0V max. Operating Voltage: 5.0V±0.5V Part numbers for undivided fundamental frequencies with tolerances and supply current Temperature Range Operating: -10° to +70°C Storage: -55° to +125°C Type number Soldering Conditions: Under 260°C within 10s. Supply current: 2mA max. Frequency/Temperature: -10°/-120ppm Ageing: ±5ppm/year max. Electrical Specification Item Symb. min. typ. max. Unit L.input voltage: VIL 0 0.8 V H.input voltage: VIH VDD-10 VDD V L. input current (Reset): IRL -30 -5 mA (Reset = VSS) H.input current (Reset): IRH 0.5 mA (Reset = VDD) L.i/p current (exc.Reset): IIL -0.5 H.i/p current (exc.Reset): IIH 5 L.output voltage: VOL mA 30 mA 0.4 V SPG 8650E 32.768 ±50 ±10 0.5 SPG 8650A 60.0 ±50 ±10 0.5 SPG 8650C 96.0 ±50 ±10 0.5 SPG 8650B 100.0 ±50 ±10 0.5 SPG 8650D 153.60 ±50 ±10 0.5 SPG 8640AN 600.0 ±100 ±20 1.0 SPG 8640CN 768.0 ±100 ±20 1.5 SPG 8640BN 1000.0 ±100 ±10 2.0 VOH VDD-10 L.output current: IOL 50% t THL t TLH 1/2VDD VOL tR IOH -40 mA Output rise time: tTLH 30 60 ms Output fall time: tTHL 25 50 ms 60 % 40 16 pin DIL 7.9 5.08 3.0 tRW Reset delay time: tR Reset release sync. error: tE Ext. signal i/p frequency: FIN tW-1/2* 1.0 ms tW** ms 1M Hz (8640N only) Ext signal i/p pulse width: tIN ms 0.5 (8640N only) Osc. start-up time: tOSC 0.2 1*** s. * to = oscillation source cycle, ** tw = ½ cycle of preset frequency *** for more than 1ms until VDD = 0~+4.5V. Time at 4.5V is to be zero 0.6 2.54 9 16 ms 1.0 0.5 0.5 (Except 1/3 and 1/5) Min. reset pulse width: A VSS t W VOH RESET Timing (VOH=VDD-1.0V) Duty: tE B VDD mA 1.6 (VOL = 0.4V) H.output current: Duty =B/Ax100(%) Reset Output waveform 80%V 20%V V (IOH = -40mA) t RW RESET timing (IOL = 1.6mA) H.output voltage: Fundamental Freq. Freq./ Current Frequency Tol. Voltage max. (kHz) (ppm) (ppm) (mA) 7.0 2.6 Actual size 8 1 20.5 max. Outline and Dimensions EUROQUARTZ GENERAL PRODUCT SPECIFICATION OSCILLATORS - PROGRAMMABLE Telephone: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] Web: www.euroquartz.co.uk SPG SERIES 8 pin Dual-in-Line PROGRAMMABLE OSCILLATORS Page 2 of 4 Terminal Connections 9 16 8 1 Connections 1 n/c 16 2 CTL 3 15 3 CTL 2 14 4 CTL 1 13 5 CTL 6 12 6 CTL 5 11 7 CTL 4 10 8 GND 9 Vdd n/c RESET n/c (CSEL) n/c (EXC) FOUT TEST OUT ( ) = 8640N only n/c = Do not connect externally For 8640 O 11 n/c 12 CLOCK 13 ENABLE 0 0 1/1 0 0 0 1/1(1/1) 0 0 1 1/10 0 0 1 1/10(1/2) 0 1 0 1/2 0 1 0 1/102(1/22) 0 1 1 1/3 0 1 1 1/103(1/23) 1 0 0 1/4 1 0 0 1/104(1/24) 1 0 1 1/5 1 0 1 1/105(1/25) 1 1 0 1/6 1 1 0 1/106(1/26) 1 1 1 1/7 1 1 1 1/107(1/27) Combining the division ratios produces the total division ratio Output Frequency Settings 8640AN CTL2 CTL4 0 0 0 0 1 1 1 1 CTL5 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 600k 60k 60 6 0.6 0.06 CTL3 CTL6 0 0 0 0 1 60k 6k 600 60 6 0.6 0.06 0.006 0 1 0 300k 30k 3k 300 30 3 0.3 0.03 0 1 1 200k 20k 2k 200 20 2 0.2 0.02 1 0 0 150k 15k 1.5k 150 15 1.5 0.15 0.015 1 0 1 120k 12k 1.2k 0.012 source frequency. 1 1 0 100k 10k (Built-in quartz crystal). 1 1 1 50k Programmable dividing ratio. Output frequency preset by procedure of output freq.) RESET Division Ratio CTL 4 CTL 5 CTL 6 0 CTL 1~ 6.(Refer to the setting FOUT Division Ratio 0 CTL1 (Pull-down resistor incorp..) OUT CTL 1 CTL 2 CTL 3 Set Terminal Terminal connection details CTL 1 - 6 Divider Output Setting Constant output of the oscillator 5k 6k 600 120 12 1.2 0.12 1k 100 10 1 0.1 500 50 5 0.5 0.05 0.01 0.005 Stops output at RESET = L. (Pull-up resistor incorporated.) TEST Used for testing the input terminal. When CTL 4 is H, output will be 1000 times 8640BN larger than the preset value at TEST = H. (Pull-down resistor incorp.) EXC (8640N only) Set Terminal CTL4 0 0 0 0 1 1 1 1 CTL5 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 1k 100 Serves as input terminal when using an external clock by changing to the built-in osc. CTL1 CTL2 CTL3 CTL6 0 0 0 1M 100k 10k 0 0 1 100k 10k 1k 100 10 the external clock is selected. 0 1 0 500k 50k 5k 500 50 (Pull-down resistor incorp.) 0 1 1 Unused terminals 1 0 0 250k 25k 2.5k 250 1 0 1 200k 20k 2k 200 RESET When unused connect to Vdd. 1 1 0 TEST When unused connect to GND. 1 1 1 CSEL When unused connect to GND. CTL 1 ~ 6 When unused connect to GND. Effective when CSEL is H. CSEL (8640N only) When this terminal is made H, Terminals (8650 O) CLOCK Clock input (max. 1MHz) ENABLE Connect to Vdd.) 333.3k 33.3k 83.3k 8.3k 833.3 1 1/10 1/10 1/100 5 1/2 1/20 1/3 1/30 25 2.5 1/4 1/40 20 2 1/5 1/50 1.6 1/6 1/60 0.83 1/12 1/120 166.6 16.6 83.3 1 33.3 3.3k 333.3 33.3 166.6k 16.6k 1.6k 10 8.3 EUROQUARTZ GENERAL PRODUCT SPECIFICATION OSCILLATORS - PROGRAMMABLE Telephone: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] Web: www.euroquartz.co.uk SPG SERIES 8 pin Dual-in-Line PROGRAMMABLE OSCILLATORS Page 3 of 4 Output Frequency Settings 8650A Set Terminal CTL1 CTL2 CTL4 0 0 0 0 1 1 1 1 CTL5 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 CTL3 CTL6 0 0 0 60k 6k 600 60 0 0 1 6k 600 60 6 0 1 0 30k 3k 300 30 0 1 1 20k 2k 200 20 1 0 0 15k 1.5k 150 1 0 1 12k 1.2k 1 1 0 10k 1k 1 1 1 5k 500 6 0.06 0.006 0.06 0.6 0.006 0.0006 3 0.3 0.03 2 0.2 0.02 0.002 15 1.5 0.15 0.015 0.0015 120 12 1.2 0.12 0.012 0.0012 100 10 1 0.1 0.01 0.001 50 5 0.5 0.05 0.005 0.0005 0.6 0.003 8650B Set Terminal CTL1 CTL2 CTL4 0 0 0 0 1 1 1 1 CTL5 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 10k CTL3 CTL6 0 0 0 100k 0 0 1 10k 1k 100 10 1 1k 100 10 1 1/10 0 1 0 50k 0 1 1 33.3k 5k 500 5 1 0 0 25k 2.5k 250 1 0 1 20k 2k 200 1 1 0 16.6k 1 1 1 8.3k 3.3k 333.3 1.6k 166.6 833.3 83.3 50 1/10 1/100 1/100 1/1000 1/2 1/20 1/200 3.33 1/3 1/30 1/300 25 2.5 1/4 1/40 1/400 20 2 1/5 1/50 1/500 16.6 1.6 1/6 1/60 1/600 8.3 0.83 1/12 33.3 1/120 1/1200 8650E Set Terminal CTL1 CTL2 CTL4 0 0 0 0 1 1 1 1 CTL5 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 CTL3 CTL6 0 0 0 32768 3276.8 327.68 32.768 3.276 0.3276 0.03276 0.00327 0 0 1 3276.8 327.68 32.768 3.276 0.327 0.0327 0.00327 0.00032 0 1 0 16384 1638.4 163.84 16.384 1.638 0.1638 0.01638 0.00163 0 1 1 10922.6 1092.26 109.22 10.922 1.092 0.1092 0.01092 0.00109 1 0 0 8192 819.2 81.92 8.192 0.819 0.0819 0.00819 0.00081 1 0 1 6553.6 655.36 65.536 6.553 0.655 0.0655 0.00655 0.00065 1 1 0 5461.3 546.13 54.613 5.416 0.546 0.0546 0.00546 0.00054 1 1 1 2730.6 273.06 27.306 2.730 0.273 0.0273 0.00273 0.00027 GENERAL PRODUCT SPECIFICATION OSCILLATORS - PROGRAMMABLE SPG SERIES 8 pin Dual-in-Line PROGRAMMABLE OSCILLATORS Page 4 of 4 Output Frequency Settings Baud Rate Generators 8640CN Output CTL1 CTL2 CTL3 CTL4 CTL5 CTL6 Baud Rate Frequency Output (kHz) Example (fo/16) 0 0 0 0 0 0 768 48000 bits/sec 1 0 1 0 0 0 153.6 9600 bits/sec 0 0 1 0 0 0 76.8 4800 bits/sec 0 1 0 0 0 1 38.4 2400 bits/sec 1 0 0 0 0 1 19.2 1200 bits/sec 8650C Output CTL1 CTL2 CTL3 CTL4 CTL5 CTL6 Baud Rate Frequency Output (kHz) Example (fo/16) 0 0 0 0 0 0 96.0 8000 bits/sec 1 0 1 0 0 0 19.2 1200 bits/sec 0 0 1 0 0 0 9.6 600 bits/sec 0 1 0 0 0 1 4.8 300 bits/sec 0 1 1 0 0 1 3.2 200 bits/sec 1 0 0 0 0 1 2.4 150 bits/sec 1 1 0 0 0 1 1.6 100 bits/sec 1 1 1 0 0 1 0.8 50 bits/sec CTL6 Frequency Output (kHz) Example (fo/16) 8650D Output CTL1 CTL2 CTL3 CTL4 CTL5 Baud Rate 0 0 0 0 0 0 153.6 9600 bits/sec 0 0 0 0 0 1 76.8 4800 bits/sec 0 0 0 0 1 0 38.4 2400 bits/sec 0 0 0 0 1 1 19.2 1200 bits/sec 0 0 0 1 0 0 9.6 600 bits/sec 0 0 0 1 0 1 4.8 300 bits/sec 0 1 1 1 0 0 3.2 200 bits/sec 0 0 0 1 1 0 2.4 150 bits/sec 1 1 0 1 0 0 1.6 100 bits/sec 0 0 0 1 1 1 1.2 75 bits/sec 1 1 1 1 0 0 0.8 50 bits/sec EUROQUARTZ Telephone: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] Web: www.euroquartz.co.uk