FUJITSU FTR

FTR-J2 Series
Ultra small High Voltage
DC Relay
FTR-J2 Series
RoHS compliant
n
Features
l
10A, 450V DC high-voltage switching
l
Contact voltage drop: typical 0.1V
l
Inrush Current 150A (Capacitive load )
l
Compact size ( L x W x H = 24 x 23.5 x 27mm )
l
2 x 1 form A
l
Coil sensitivity 1W
l
High insulation between contacts and coil
- Insulation distance : Clearance/creepage > 6mm
- Dielectric strength : 4,000 VAC
- Surge strength
: 10,000 V
l
Plastic materials conform to UL94 flame class V-0
l
RoHS Compliant
l
Optional transparent cover
nORDERING INFORMATION
[Example]
FTR-J2 A K 012 W – RG
(a) (b) (c) (d) (e) (f )
(a)
Series name
FTR-J2 series
(b)
Contact arrangement
A: 2 x 1 form A
(c)
Coil
K: Standard sensitivity
(d)
Nominal coil voltage
Please refer to COIL DATA CHART
(e)
Contact material
W: silver alloy
(f)
Optional
RG: Transparent cover
Note: The designation name is printed on the top of the relay as follows:
(Example: Ordered type: FTR-J2AK012W
Printing: J2AK012W
FTR-J2 Series
n COIL DATA CHART 1
2 coils in series (10A, 450VDC configuration)
Part Number
Nominal
Coil Resistance Must Operate
Voltage (VDC)
( ±10%)
Voltage
Must Release
Voltage
FTR-J2AK005W
10
94 Ω
7.0 VDC
0.5 VDC
FTR-J2AK006W
12
136 Ω
8.4 VDC
0.6 VDC
FTR-J2AK012W
24
540 Ω
16.8 VDC
1.2 VDC
FTR-J2AK024W
48
2,200 Ω
33.6 VDC
2.4 VDC
FTR-J2AK048W
96
8,800 Ω
67.2 VDC
4.8 VDC
FTR-J2AK060W
120
13,580 Ω
84.0 VDC
6.0 VDC
FTR-J2AK110W
220
45,600 Ω
154.0 VDC
11.0 VDC
Nominal Power
(± 10%)
Approximately
1.06W
Note 1: Nominal voltage is different from indication of part number. Please refer to the COIL DATA CHART 2
for single coil configuration data.
Note 2: All values in the table valid at 20˚C ambient temperature.
n COIL DATA CHART 2
Single coil (10A, 200VDC configuration)
Part Number
Nominal
Coil Resistance Must Operate
Voltage (VDC)
( ±10%)
Voltage
Must Release
Voltage
FTR-J2AK005W
5
47 Ω
3.5 VDC
0.25 VDC
FTR-J2AK006W
6
68 Ω
4.2 VDC
0.3 VDC
FTR-J2AK012W
12
270 Ω
8.4 VDC
0.6 VDC
FTR-J2AK024W
24
1,100 Ω
16.8 VDC
1.2 VDC
FTR-J2AK048W
48
4,400 Ω
33.6 VDC
2.4 VDC
FTR-J2AK060W
60
6,790 Ω
42.0 VDC
3.0 VDC
FTR-J2AK110W
110
22,800 Ω
77.0 VDC
5.5 VDC
Nominal Power
(± 10%)
Approximately
0.53W
Note: All values in the table valid at 20˚C ambient temperature.
n SCHEMATICS
Connection on PCB
2 coils in series
Each relay section is used indepentdently
Bottom view
COIL DATA CHART 1
COIL DATA CHART 2
FTR-J2 Series
n
specifications
FTR-J2 series
FTR-J2AK ( )W
Contact
Arrangement
2 x 1 form A
Contact material
Silver alloy
Rating (refer to CIRCUIT)
10A, 450VDC (resistive load) + polarity pin 7 and 4 * each NO contact connected in series
10A, 200VDC (resistive load) (single contact)
+ polarity pin 7 and 4
Coil
Overload switching
10A, 500VDC (resistive load) * each NO contact connected in series
Maximum carrying current
12A
Inrush current
Peak 150A (capacitive load / 340VDC, 1410µ F)
Contact voltage drop
Typical 0.1V (at nominal contact current)
Operate voltage (at 20°C)
Maximum 70% of nominal voltage
Release voltage (at 20°C)
Minimum 5% of nominal voltage
Operating temperature (no frost)
-40°C to +85°C
-40°C to +70°C, "-RG" transparent cover version
Time
value
Insulation
Operate (at nominal voltage)
15ms maximum, excluding contact bounce time
Release (at nominal voltage)
5ms maximum
Resistance
Dielectric
strength
Minimum 1,000MΩ (at 500VDC)
between open contacts
1,000 VAC (50/60 Hz) 1 min.
between contact sets
4,000 VAC (50/60 Hz) 1 min.
between contacts and coil 1,000 VAC (50/60 Hz) 1 min.
Life
Surge strength between contact and coil
10,000 V (1.2 x 50µ s)
Electrical
10K operations (10A, 450VDC at resistive load)
Mechanical
2M operations
Vibration
Endurance
resistance Misoperation
10 to 55 Hz at double amplitude of 1.5 mm
Shock
Endurance
resistance Misoperation
200 m/s2 (11±1ms)
Weight
Approximately 26 g
10 to 55 Hz at double amplitude of 1.5 mm
1,000 m/s2 (6±1ms)
Note: Use a varistor as a protective circuit against reverse surge connected parallel to the coil. The reverse blocking
voltage should be about 3 times the value of the power source voltage.
n SAFETY STANDARDS
lUL508
l
10A, 450VDC, resistive, 10,000 cycles for series connection of each NO contact
10A, 400VDC, resistive, 10,000 cycles for series connection of each NO contact
10A, 200VDC, resistive, 10,000 cycles for each NO contact
VDE: 0435
10A, 400VDC, resistive, 10,000 cycles for series connection of each NO contact
10A, 200VDC, resistive, 10,000 cycles for each NO contact
FTR-J2 Series
nDIMENSIONS
Unit: mm
nPC BOARD PATTERN
Bottom view
Unit: mm
FTR-J2 Series
nCIRCUIT
lLoad sides and input sides (coil sides) for 10A, 450VDC
Please refer to COIL DATA CHART 1 for nominal coil voltage
Bottom view
Note: Load sides have polarities (+) and (-). Input sides (coil sides) do not have polarities.
lLoad sides and input sides (coil sides) for 10A, 200VDC
Please refer to COIL DATA CHART 1 for nominal coil voltage
Bottom view
Note: Load sides have polarities (+) and (-). Input sides (coil sides) do not have polarities.
FTR-J2 Series
nCIRCUIT
lLoad sides and input sides (coil sides) for 10A, 200VDC
Please refer to COIL DATA CHART 2 for nominal coil voltage
Bottom view
Note: You can use each NO contact independently
Load sides have polarities (+) and (-). Input sides (coil sides) do not have polarities.
lLoad sides and input sides (coil sides) for 10A, 450VDC
Please refer to COIL DATA CHART 2 for nominal coil voltage
Bottom view
Note: Synchronized with a signal to coils of the relay operate / release
Load sides have polarities (+) and (-). Input sides (coil sides) do not have polarities.
FTR-J2 Series
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l All signal and power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
Flow Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at 260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
FTR-J2 Series
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. April 27, 2009.