B40C800G THRU B380C800G GLASS PASSIVATED SINGLE - PHASE BRIDGE RECTIFIER Reverse Voltage - 65 to 600 Volts Forward Current - 0.9 Ampere FEATURES Case Style WOG 0.388 (9.86) 0.348 (8.84) 0.220 (5.6) 0.160 (4.1) 1.0 (25.4) MIN. 0.032 (0.81) 0.060 (1.52) 0.028 (0.71) 0.020 (0.51) 0.220 (5.6) 0.348 (8.84) 0.180 (4.6) 0.308 (7.82) 0.220 (5.6) 0.180 (4.6) ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junctions ♦ High case dielectric strength ♦ Typical IR less than 0.1 µA ♦ High overload surge current ♦ Ideal for printed circuit boards ♦ High temperature soldering guaranteed: 260°C/10 seconds, 0.375" (9.5mm) lead length 5 lbs. (2.3kg) tension MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.04 ounce, 1.1 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS B40 C800G B80 C800G B125 C800G B250 C800G B380 C800G UNITS Maximum repetitive peak reverse voltage VRRM 65 125 200 400 600 Volts Maximum RMS input voltage R + C-load VRMS 40 80 125 250 380 Volts Maximum average forward output current for free air operation at TA=45°C R + L-load C-Load I(AV) 0.9 0.8 Amps VRSM 100 200 350 600 1000 Volts Maximum DC blocking voltage VDC 65 125 200 400 600 Volts Maximum peak working voltage VRWM 90 180 300 600 900 Volts Maximum non-repetitive peak voltage Maximum repetitive peak forward surge current IFRM 10.0 Amps Peak forward surge current single sine wave on rated load at TJ=125°C IFSM 45.0 Amps Rating for fusing at TJ=125°C (t<100ms) I2t 10.0 A2sec Minimum series resistor C-load at VRMS = ±10% Rt 1.0 2.0 4.0 8.0 12.0 Ohms Maximum load capacitance +50% -10% CL 5000 2500 1000 500 200 µF Maximum instantaneous forward voltage drop per leg at 0.9A VF 1.0 Volts Maximum reverse current at rated repetitive peak voltage per leg IR 10.0 µA RΘJA RΘJL 36.0 11.0 °C/W TJ -40 to +125 °C TSTG -40 to +150 °C Typical thermal resistance per leg (NOTE 1) Operating junction temperature range Storage temperature range NOTES: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. at 0.375" (9.5mm) lead lengths with 0.2 x 0.2"(5.5 x 5.5mm) copper pads. 4/98 RATINGS AND CHARACTERISTICS CURVES B40C800G THRU B380C800G FIG. 2 - DERATING CURVES FOR OUTPUT RECTIFIED CURRENT B250C800G...B380C800G BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE, AMPERES FIG.1 - DERATING CURVES OUTPUT RECTIFIED CURRENT FOR B40C800G...B125C800G BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES 1.0 50 to 60 Hz RESISTIVE OR INDUCTIVE LOAD 0.375” (9.5mm) LEAD LENGTHS 0.8 CAPACITIVE LOAD 0 - 10µF 10 - 100µF > - 100µF 0.6 0.4 0.375” (9.5mm) P.C.B. 0.2 COPPER PADS 0.22 x 0.22” (5.5 x 5.5mm) 0 0 20 40 60 80 100 1.0 0.8 CAPACITIVE LOAD 0 - 10µF 10 - 100µF > - 100µF 0.6 0.4 0.2 COPPER PADS 0.22 x 0.22” (5.5 x 5.5mm) 0 0 120 140 20 40 60 80 100 120 140 AMBIENT TEMPERATURE, °C FIG. 4 - TYPICAL FORWARD CHARACTERISTICS PER LEG FIG. 3 - MAXIMUM NON-REPETITIVE PEAK FORWARD CURRENT PER LEG 20 INSTANTANEOUS FORWARD SURGE CURRENT, AMPERES 50 1 CYCLE 40 TJ = 25°C 10mS SINGLE SINE-WAVE 30 20 10 10 100 NUMBER OF CYCLES AT 50Hz TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 10 1 0.1 0.01 0.4 0.8 0.6 1.0 1.2 0.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL REVERSE CHARACTERISTICS PER LEG 10 FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEG TJ=100°C 100 JUNCTION CAPACITANCE, pF INSTANTANEOUS REVERSE CURRENT, MICROAMPERES PEAK FORWARD SURGE CURRENT, AMPERES 0.375” (9.5mm) P.C.B. AMBIENT TEMPERATURE, °C 0 1.0 50 to 60 Hz RESISTIVE OR INDUCTIVE LOAD 0.375” (9.5mm) LEAD LENGTHS 1 0.1 TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 TJ=25°C 0.01 0 1.0 0.1 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 100 1.0 10 REVERSE VOLTAGE, VOLTS 100