EDF1AS THRU EDF1DS MINIATURE GLASS PASSIVATED FAST EFFICIENT SURFACE MOUNT BRIDGE RECTIFIER Reverse Voltage - 50 to 200 Volts Forward Current - 1.0 Ampere FEATURES Case Style DFS 0.047 (1.20) 0.040 (1.02) 0.205 (5.2) 0.195 (5.0) 0.404 (10.3) 0.386 (9.80) 0.335 (8.51) 0.320 (8.13) 45o 0.255 (6.5) 0.245 (6.2) ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ This series is UL listed under Recognized Component Index, file number E54214 ♦ Glass passivated chip junctions ♦ High surge overload rating50 amperes peak ♦ Ideal for printed circuit boards ♦ Superfast recovery times for high efficiency ♦ High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs (2.3kg) tension 0.013 (0.330) 0.130 (3.3) 0.009 (0.241) 0.120 (3.05) MECHANICAL DATA 0.060 (1.524) 0.040 (1.016) 0.013 (0.330) 0.003 (0.076) Dimensions in inches and (millimeters) Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on body Mounting Position: Any Weight: 0.04 ounce, 1.0 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS EDF1AS EDF1BS EDF1CS EDF1DS UNITS Maximum repetitive peak reverse voltage VRRM 50 100 150 200 Volts Maximum RMS voltage VRMS 35 70 106 140 Volts Maximum DC blocking voltage VDC 50 100 150 200 Volts Maximum average forward output rectified current at TA=40°C (NOTE 2) I(AV) 1.0 Amp Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ=150°C IFSM 50.0 Amps Rating for fusing (t < 8.3ms) I2t 10.0 A2sec Maximum instantaneous forward voltage drop per leg at 1.0A VF 1.05 Volts IR 5.0 1.0 µA mA trr 50.0 ns RΘJA RΘJL 38.0 12.0 °C/W TJ, TSTG -55 to +150 °C Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=125°C Maximum reverse recovery time (NOTE 1) Typical thermal resistance per leg (NOTE 2) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Units mounted on P.C.B. with 0.51 x 0.51” (13 x 13mm) copper pads 4/98 RATINGS AND CHARACTERISTICS CURVES EDF1AS THRU EDF1DS FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 1.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG. 1 - DERATING CURVES OUTPUT RECTIFIED CURRENT IPK/IAV=π RESISTIVE OR INDUCTIVE LOAD 0.75 0.51 x 0.51” (13 x 13mm) COPPER PADS 0.5 CAPACITIVE LOADS Ipk / IAV=5.0 Ipk / IAV=10 Ipk / IAV=20 0.25 50 40 30 20 1.0 CYCLE 10 0 0 20 40 60 80 100 120 140 SINGLE SINE-WAVE (JEDEC Method) TJ=150°C 1 10 100 NUMBER OF CYCLES AT 60 Hz 160 AMBIENT TEMPERATURE, °C FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG 1,000 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS JUNCTION CAPACITANCE, pF 30 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 20 15 10 5.0 0 0.1 1 10 REVERSE VOLTAGE, VOLTS 10 1 0.1 0 TJ=25°C 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG 25 TJ=125°C 100 100 200