ETC PE1-12706AC

Specification : TE -module PE1-12706AC
Issue 2
Issued: 29/05/2008
SPECIFICATION
Product:Thermoelectric module
Part Number:PE1-12706AC
1. Scope
1—1
1—2
This specification is applied to Multicomp thermoelectric modules
Revision of these specifications is carried out after consent.
2. Specification
2-1
Parameters
Parameters
Remarks
Internal resistance
1.90 Ω ± 10%
Note-1
Imax.
6.0 A
Note-2
Vmax.
15.7V
Note-3
Th=27℃
Th=50℃
Qmax.
53.1 W
59.1 W
Note-4
⊿Tmax.
70 ℃
77 ℃
Note-5
solder melting point
235 ℃
Note-6
Maximum. compress.
1MPa
Note-7
Note-1 Measured by AC 4-terminal method at 25℃.
Note-2 Maximum current at ⊿Tmax.
Note-3 Maximum voltage at ⊿Tmax.
Note-4 Maximum cooling capacity at Imax.,Vmax. and ⊿T=0℃.
Note-5 Maximum temperature difference at Imax.,Vmax. and Q=0W.
(Maximum parameters are measured in a vacuum 1.3P)
Note-6 The solder melting point of thermoelectric module
Note-7 Recommended maximum compression (not destruction limit)
1/2
2-2 Recommendations:
- Operating range: -40 ℃ to +100 ℃
- Dropping or exerting mechanical shock will cause breakage, take care in handling
- Thinly spread thermally conductive grease should be placed between module and heat exchanger
- Surface deviation from flatness should be kept under 0.02mm
- For optimum reliability and performance it is recommended that the module be utilised <0.7 I max
2 – 3 Outline Drawing