XFPM,XFHM Data sheet Pre-amplified/5V Excitation/Gauge Features . . . . . Applications . Industrial instrumentation . Pressure switch, Pneumatic device Two accuracy ranks, 1.5 FS and 2.5 FS available Volt level output On-chip amplification and temperature compensations Pre-calibration of offset voltage and span Non-corrosive liquid measurable (XFPMC, XFHMC only) . Medical device Part number for ordering XFPM C - 025KP G R H Accuracy No mark : H : Model XFPM XFHM 2.5 FS 1.5 FS (Contact us about availability) Terminal leads direction (See Outline Diagram) No mark : Rated pressure (Pa) Available pressure media No mark : Non-corrosive gas only Pressure type C : Non-corrosive gas and liquid G : Gauge (Positive pressure) (Contact us about availability) GV : Gauge (Negative pressure) R GW : Gauge (Bipolar pressure) Pressure type : Gauge pressure XFPM XFHM Dual-In-line-Package (DIP) Horizontal pressure port DIP Model Package configuration Measurable pressure range (kPa) 100 100 0 100 0 25 0 50 0 100 0 200 0 1000 XFPM-100KPGW XFPM-100KPGV XFPM-025KPG XFPM-050KPG XFPM-100KPG XFPM-200KPG XFPM-001MPG Part number for ordering XFPM-100KPGWR XFPM-100KPGVR XFPM-025KPGR XFPM-050KPGR XFPM-100KPGR XFPM-200KPGR XFPM-001MPGR XFHM-100KPGWR XFHM-100KPGVR XFHM-025KPGR XFHM-050KPGR XFHM-100KPGR XFHM-200KPGR XFHM-001MPGR Specifications Model/Rated pressure 100KPGW 100KPGV 025KPG 050KPG 100KPG 200KPG 001MPG Recommended operating conditions Pressure type Gauge pressure 100 100 25 50 100 200 1000 Rated pressure 1.020 1.020 0.255 0.510 1.020 2.040 10.20 Measurable pressure range 100 100 0 100 0 25 0 50 0 100 0 200 0 1000 Pressure media 1 XFPM, XFHM : Non-corrosive gas only, XFPMC, XFHMC : Non-corrosive gas and liquid Excitation voltage 5.0 0.25 Absolute maximum rating 1.5times of rated pressure Maximum load pressure Twice of rated pressure Maximum excitation voltage 8 Operating temperature 40 125 Storage temperature 40 125 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics(Excitation voltage Vcc=5.0V constant, Ambient temperature Ta=25 ) Current consumption less than 10 Output impedance less than 10 Source current less than 0.2 Sink current less than 2 Mechanical response time 2 (For the reference) Full scale span voltage 4.5 Offset voltage 1.2 0.2 0.1125, 0.2 0.0675(H) Full scale span voltage 1.2 4.7 0.1125, 4.7 0.0675(H) Accuracy 1.2 2.5, 1.5(H) Note ; 1) Please consult us available when you choose the C models and the H models. 2) Excluding input voltage error. 1 Unit kPa kg/cm2 kPa VDC VDC RH mA mA mA msec V V V FS/0 85 XFPM,XFHM Data sheet Pre-amplified/5V Excitation/Gauge Outline dimensions unit : mm XFPM 4 5 6 3 2 1 C0.5 3 2 4 3 14 1 4.5 0.6 Vent hole R1.5 15.24(600mil) 5 Pressure port 0.8 max 15 2.2 0.5 6 8 5 0.2 4 12 Terminal leads Labelled faceplate 6.8 2.8 Recommended footprint for PCB 6- 1.8(Diameter of lands) 2.54 2.54 0.5 60 1.2 2.54 2.54 6- 0.9(Diameter of through holes) 15.2 (unit : mm) unit : mm XFPM-R 4 0.2 8 0.8 Pressure port 2.2 0.5 3 14 R1.5 4 5 6 3 2 4.5 1 15.24(600mil) 5 max 15 6 4 5 12 C0.5 1 2 0.6 Vent hole 3 Terminal leads Recommended footprint for PCB 2.54 2.54 6- 0.9(Diameter of through holes) 6- 1.8(Diameter of lands) 2.54 2.54 60 1.2 0.5 Labelled faceplate 2.8 6.8 15.2 2 (unit : mm) XFPM,XFHM Data sheet Pre-amplified/5V Excitation/Gauge Outline dimensions unit : mm 2.54 2.54 XFHM-R 2 3 6 5 4 5.5 1 Pressure port (14) 1.2 4.7 2.6 3.4 (7.6) 1.55 3.2 1 6 0.6 0.25 Recommended footprint for PCB 8 Labelled faceplate 6 5 4 6- 1(Diameter of through holes) 2.54 2.54 8 6- 1.8(Diameter of lands) 1 15 Vent hole 10.16 1 2 3 10 3 (unit : mm) XFPM,XFHM Data sheet Pre-amplified/5V Excitation/Gauge Connection diagram XFPM, XFHM Vcc(DC5V) Vcc Vout Vout GND C2 C1 GND Remarks : 1) C1 : Connect 680pF capacitor within 2cm distance from leads. 2) C2 : Connect 0.01 F or more capacitor within 2cm distance from leads. 3) 4 and 5 pins must be No Connection. Open them as floating ones completely, and do NOT connect to other line or each other. Transfer Function Vout=Vs (P + ) (Pressure Error Temperature Error Multiplier Vs) Vs=5.0volts Notes ; The output voltage (Vout) is no perfect ratiometric with the power supply voltage. P=Input Pressure(kPa) Model 025KPG(D) 050KPG(D) 100KPG(D) 100KPGV 100KPGW(DW) 200KPG(D) 001MPG(D) 115KPA pressure range 0 25kPa 0 50kPa 0 100kPa 0 100kPa 100 +100kPa 0 200kPa 0 1MPa 15 115kPa.abs 0.036 0.018 0.009 0.009 0.0045 0.0045 0.0009 0.009 Temperature Error Multiplier Temperature Error Multiplier 3.5 3 2.5 2 1.5 1 0.5 0 -40 -20 0 20 40 60 80 85 100 125 120 Temperature Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 4 E-mail : [email protected] 0.04 0.04 0.04 0.04 0.49 0.04 0.04 0.095 Pressure Error(kPa) 0.625 1.25 2.5 2.5 5.0 5.0 25 2.5