Specification : TE -module HPE-128-10-05 Issue 1 Issued: 29/05/2008 SPECIFICATION Product:Thermoelectric module Part Number:HPE-128-10-05 1. Scope 1—1 1—2 This specification is applied to Multicomp thermoelectric modules Revision of these specifications is carried out after consent. 2. Specification 2-1 Parameters Parameters Remarks Internal resistance 1.40 Ω ± 10% Note-1 Imax. 9.0 A Note-2 Vmax. 15.8 V Note-3 Th=25℃ Qmax. 88.0 W Note-4 ⊿Tmax. 68℃ Note-5 solder melting point 138 ℃ Maximum. compress. 1MPa Note-6 Note-7 Note-1 Measured by AC 4-terminal method at 25℃. Note-2 Maximum current at ⊿Tmax. Note-3 Maximum voltage at ⊿Tmax. Note-4 Maximum cooling capacity at Imax.,Vmax. and ⊿T=0℃. Note-5 Maximum temperature difference at Imax.,Vmax. and Q=0W. (Maximum parameters are measured in a vacuum 1.3P) Note-6 The solder melting point of thermoelectric module Note-7 Recommended maximum compression (not destruction limit) 1/2 2 -2 Recommendations: - high cooling capacity from a small surface and long lifetime in power cycling applications with change of current polarity - operation temperature up to 90°С for long lifetime; up to 110 degC for short periods - with operation current close to 0.5 Imax extremely high COP (coefficient of performance possible) - preferable application; high cooling capacity at high temperatures / cycling 2-3 Performance Graph (298K) 2-4 Performance Graph (323K)