JMK Inc. AA-1113-1 Input Voltage = 8.5—19 Vdc Output voltage = 13.6—13.9 Volt Output current = 1.0 A max Operating Temperature Range = -40º—70º C Storage temperature range = -40º—100º C Metal case Reverse polarity protected Designed to meet the vibration and shock requirements of Mil-Std-810 SAE J1455 Order P/N: AA-1113-1 USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 EUR JMK Inc Glasgow, Scotland UK The AA-1113-1 battery charger is designed to provide charging capability for lead acid batteries used as backup batteries for vehicular electronic systems. The ideal charging voltage of 13.6—13.9 volts will maintain the battery in excellent operating condition and help extend the life of the battery to its’ maximum operating life. The charger will maintain the 13.75 volt output over the input voltage range of 8.5—19 volts. This is especially helpful in fleets where vehicle alternator voltage levels may vary due to age and usage. Although it is not shown here this unit is also available with AWG #18 wire leads instead of the 0.25 “quick-connect terminals”. PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 FX: 44-(0) 141 589 1884