HH-1055-6.3 HH-1055-6.3B JMK. Inc Operating voltage = 85 to 250 V~ Operating current = 6.3 Amp Operating frequency = 50/60 Hz Oper. temperature (-6.3) = -20 to 50o C (see derating chart ) Oper. temperature (-6.3B) = -40 to 50o C (see derating chart ) Diel. withstanding (line - case) = 1500 Vac Diel. withstanding (line - line) = 1500 Vdc Leakage current = 1.0 ma at 220 Vac, 50 Hz Max residual voltage after 1 sec. = 34 Volts Agency approvals = UL, CSA, TUV Designed with Vicor for use on their HAM module LINE LOAD 410 V Order P/N : HH-1055-6.3 HH-1055-6.3B (Wide temp range) 4-40 INSERT .25 DP (4 PL) .080 DIA PIN (6 PL) 4.60 0.25 0.94 2.50 LINE 2.40 2.00 0.20 LOAD 0.30 0.50 1.46 0.06 1.80 0.50 This filter has been designed in cooperation with Vicor engineers to work with the Vicor Harmonic Attenuator Module (HAM). The filter provides the correct attenuation for the HAM to meet the European an US conducted emissions requirements. The filter also has the transient protection required to protect the front end of the HAM from damage due to transients. The standard model will meet most applications. If low temperatures (-40oC) are required along with shock and vibration requirements we recommend the HH-10556.3B model 0.13 ±0.02 2.80 USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 EUR JMK Inc Glasgow G13 1DN Scotland UK PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 778 531-0729 FX: 44-(0) 141 589-1884