JMnic Product Specification 2SA1651 Silicon PNP Power Transistors DESCRIPTION ・With TO-220Fa package ・Fast switching speed ・Low collector saturation voltage APPLICATIONS ・For use in switching power supplies,DC-DC converters,motor drivers,solenoid drivers, and other low-voltage power supply devices, as well as for high current switching PINNING PIN DESCRIPTION 1 Emitter 2 Collector;connected to mounting base 3 Base Absolute maximum ratings(Ta=25℃) SYMBOL PARAMETER CONDITIONS VALUE UNIT VCBO Collector-base voltage Open emitter -150 V VCEO Collector-emitter voltage Open base -100 V VEBO Emitter-base voltage Open collector -7 V -7 A -14 A -3.5 A IC Collector current ICM Collector current-peak IB Base current PT Total power dissipation PW≤300μs, duty cycle≤10% Ta=25℃ 1.5 W TC=25℃ 25 Tj Junction temperature 150 ℃ Tstg Storage temperature -55~150 ℃ JMnic Product Specification 2SA1651 Silicon PNP Power Transistors CHARACTERISTICS Tj=25℃ unless otherwise specified SYMBOL PARAMETER VCEsat-1 Collector-emitter saturation voltage VCEsat -2 CONDITIONS MIN TYP. MAX UNIT IC=-4A; IB=-0.2A -0.3 V Collector-emitter saturation voltage IC=-6A; IB=-0.3A -0.5 V VBE sat -1 Base-emitter saturation voltage IC=-4A; IB=-0.2A -1.2 V VBE sat -2 Base-emitter saturation voltage IC=-6A; IB=-0.3A -1.5 V ICBO Collector cut-off current VCB=-100V; IE=0 -10 μA IEBO Emitter cut-off current VEB=-5V; IC=0 -10 μA hFE-1 DC current gain IC=-0.5A ; VCE=-2V 100 hFE-2 DC current gain IC=-1.5A ; VCE=-2V 100 hFE-3 DC current gain IC=-4A ; VCE=-2V 60 fT Transition frequency IC=-1.5A ; VCE=-10V 150 MHz COB Collector capacitance IE=-0 ; VCB=-10V;f=1MHz 150 pF 0.3 μs 1.5 μs 0.4 μs 400 Switching times ton Turn-on time ts Storage time tf Fall time IC=-4A; IB1=-IB2=-0.2A RL=12.5Ω; VCC=-50V hFE-2 Classifications M L K 100-200 150-300 200-400 2 JMnic Product Specification 2SA1651 Silicon PNP Power Transistors PACKAGE OUTLINE Fig.2 Outline dimensions(unindicated tolerance:±0.15 mm) 3