3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APFA3010SURCGKPBAC ATTENTION HYPER RED / GREEN / BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z3.0mmx1.0mm RIGHT ANGLE SMT LED, 1.5mm The Hyper Red source color devices are made with DH THICKNESS. InGaAlP on GaAs substrate Light Emitting Diode. zLOW The Green source color devices are made with POWER CONSUMPTION. zWIDE zIDEAL VIEWING ANGLE. InGaAlP on GaAs substrate Light Emitting Diode. FOR BACKLIGHT AND INDICATOR. The Blue source color devices are made with InGaN on SiC zPACKAGE Light Emitting Diode. : 2000PCS / REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 3. Static electricity and surge damage the LEDS. ●RoHS COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG6591 REV NO: V.1 DATE: JUL/19/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203005880 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 110 250 18 50 18 60 HYPER RED (InGaAlP) APFA3010SURCGKPBAC GREEN (InGaAIP) Viewing Angle [1] WATER CLEAR BLUE (InGaN) 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Green Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 640 574 468 nm IF=20mA Hyper Red Green Blue 628 570 470 nm IF=20mA Spectral Line Half-width Hyper Red Green Blue 27 20 21 nm IF=20mA C Capacitance Hyper Red Green Blue 45 15 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 1.9 2.1 3.3 2.5 2.5 3.8 V IF=20mA IR Reverse Current Hyper Red Green Blue 10 10 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation 75 75 114 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 185 150 100 mA Reverse Voltage 5 Operating Temperature V -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG6591 REV NO: V.1 DATE: JUL/19/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203005880 APFA3010SURCGKPBAC Hyper Red SPEC NO: DSAG6591 REV NO: V.1 DATE: JUL/19/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203005880 Green SPEC NO: DSAG6591 REV NO: V.1 DATE: JUL/19/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203005880 Blue SPEC NO: DSAG6591 REV NO: V.1 DATE: JUL/19/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203005880 APFA3010SURCGKPBAC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAG6591 REV NO: V.1 DATE: JUL/19/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203005880 PACKING & LABEL SPECIFICATIONS APFA3010SURCGKPBAC SPEC NO: DSAG6591 REV NO: V.1 DATE: JUL/19/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1203005880