3.2x1.0mm RIGHT ANGLE FULL COLOR SMD CHIP LED LAMP Part Number: APFA3210PBAVGASURKC PRELIMINARY SPEC BLUE/ GREEN ATTENTION HYPER RED OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z LOW POWER CONSUMPTION. The Blue source color devices are made with InGaN on z 3.2mmX1.0mm RIGHT ANGLE SMT LED,1.5mm SiC Light Emitting Diode. THICKNESS. The Green source color devices are made with InGaN on z WIDE VIEWING ANGLE. G-SiC Light Emitting Diode. z PACKAGE : 2000PCS / REEL. The Hyper Red source color devices are made with DH zMOISTURE z SENSITIVITY LEVEL : LEVEL 3 InGaAlP on GaAs substrate Light Emitting Diode. Static electricity and surge damage the LEDS. RoHS COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG8383 REV NO: V.1 DATE: SEP/21/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 1 OF 7 ERP: 1203005147 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type BLUE (InGaN) APFA3210PBAVGASURKC WATER CLEAR GREEN (InGaN) HYPER RED (InGaAIP) Viewing Angle [1] Min. Typ. 18 60 50 200 70 200 2θ1/2 130° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue Green Hyper Red λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 520 650 nm IF=20mA Blue Green Hyper Red 470 525 635 nm IF=20mA Spectral Line Half-width Blue Green Hyper Red 21 35 28 nm IF=20mA C Capacitance Blue Green Hyper Red 100 100 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Green Hyper Red 3.3 3.2 1.95 3.8 4.0 2.5 V IF=20mA IR Reverse Current Blue Green Hyper Red 10 10 10 uA VR= 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Green Hyper Red Units Power dissipation 114 120 75 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 100 100 185 mA Reverse Voltage 5 V -40°C To +85°C Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG8383 REV NO: V.1 DATE: SEP/21/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 2 OF 7 ERP: 1203005147 APFA3210PBAVGASURKC Blue SPEC NO: DSAG8383 REV NO: V.1 DATE: SEP/21/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 3 OF 7 ERP: 1203005147 Green SPEC NO: DSAG8383 REV NO: V.1 DATE: SEP/21/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 4 OF 7 ERP: 1203005147 Hyper Red SPEC NO: DSAG8383 REV NO: V.1 DATE: SEP/21/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 5 OF 7 ERP: 1203005147 APFA3210PBAVGASURKC Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG8383 REV NO: V.1 DATE: SEP/21/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 6 OF 7 ERP: 1203005147 PACKING & LABEL SPECIFICATIONS APFA3210PBAVGASURKC SPEC NO: DSAG8383 REV NO: V.1 DATE: SEP/21/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 7 OF 7 ERP: 1203005147