3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AAA3528SURKVGAPBA PRELIMINARY SPEC HYPER RED ATTENTION GREEN / BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features zSUITABLE FOR ALL SMT ASSEMBLY AND The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. SOLDER PROCESS. ON TAPE AND REEL. The Green source color devices are made with InGaN on zPACKAGE: 1500PCS / REEL. G-SiC Light Emitting Diode. zMOISTURE SENSITIVITY LEVEL : LEVEL 4. The Blue source color devices are made with InGaN on zAVAILABLE zRoHS SiC Light Emitting Diode. COMPLIANT. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subjected to change without notice. SPEC NO: DSAG5696 REV NO: V.1 DATE: JUN/19/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1201002221 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type HYPER RED (InGaAIP) AAA3528SURKVGAPBA WATER CLEAR GREEN (InGaN) BLUE (InGaN) Viewing Angle [1] Min. Typ. 70 200 70 200 36 70 2θ1/2 120° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Green Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 650 520 468 nm IF=20mA Hyper Red Green Blue 635 525 470 nm IF=20mA Spectral Line Half-width Hyper Red Green Blue 28 35 21 nm IF=20mA C Capacitance Hyper Red Green Blue 35 100 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 1.95 3.2 3.3 2.5 4.0 3.8 V IF=20mA IR Reverse Current Hyper Red Green Blue 10 10 10 uA VR= 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation 75 200 114 mW DC Forward Current 30 50 30 mA Peak Forward Current [1] 185 100 100 mA Reverse Voltage 5 V -40°C To +85°C Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5696 REV NO: V.1 DATE: JUN/19/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1201002221 AAA3528SURKVGAPBA Hyper Red SPEC NO: DSAG5696 REV NO: V.1 DATE: JUN/19/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1201002221 Green SPEC NO: DSAG5696 REV NO: V.1 DATE: JUN/19/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1201002221 Blue SPEC NO: DSAG5696 REV NO: V.1 DATE: JUN/19/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1201002221 AAA3528SURKVGAPBA Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5696 REV NO: V.1 DATE: JUN/19/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1201002221 PACKING & LABEL SPECIFICATIONS AAA3528SURKVGAPBA SPEC NO: DSAG5696 REV NO: V.1 DATE: JUN/19/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1201002221