2.8X1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: AA2810RWS/Z PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES WHITE Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features z2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm THICKNESS. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. z LOW POWER CONSUMPTION. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. Applications z traffic signaling. ELECTROSTATIC DISCHARGE THRESHOLD z backlighting (illuminated advertising , general lighting). (HBM):1000V. z interior and exterior automotive lighting. z TYP. COLOR TEMPERATURE:6500K z COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). z OPTICAL z COLOR z substitution of micro incandescent lamps. z Reading camps. z signal and symbol luminaire for orientation. EFFICIENCY:53.1 lm/W(TYP.) REPRODUCTION INDEX:80 zMOISTURE SENSITIVITY LEVEL : LEVEL 4. zRoHS COMPLIANT. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.0039") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4500 REV NO: V.1 DATE: MAY/21/2007 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002975 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. SPEC NO: DSAH4500 REV NO: V.1 DATE: MAY/21/2007 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002975 Selection Guide Note2 Dice Part No. AA2810RWS/Z Lens Type WHITE (InGaN) luminous Intensity Iv(mcd) @ 20 mA WATER CLEAR Note3 Viewing Note1 Angle Φv (mlm) @ 20 mA Min. Typ. Min. Typ. 2θ1/2 650 1200 1500 3400 120° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 111 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 300 140 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage [Typ.] Reverse Current (VR=5V) [Max.] Unit 0.31 - 0.31 - 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) Value 3.2 V 3.7 0.01 IR μA 10 Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 / °C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH4500 REV NO: V.1 DATE: MAY/21/2007 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002975 Brightness codes Note1 luminous Intensity Iv(mcd) @ 20 mA Φv (mlm) @ 20 mA Code. Min. Max. Typ. T 650 1200 3300 U 900 1500 3450 V 1200 1800 3600 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White AA2810RWS/Z SPEC NO: DSAH4500 REV NO: V.1 DATE: MAY/21/2007 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002975 AA2810RWS/Z SPEC NO: DSAH4500 REV NO: V.1 DATE: MAY/21/2007 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002975 AA2810RWS/Z White CIE 0.44 0.42 0.40 c1 0.38 0.36 b4 c0 0.34 b3 b1 0.32 b2 0.30 a1 0.28 a0 0.26 0.24 0.22 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 a0 a1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Reference CCT: 14000~9000k Reference CCT: 14000~9000k b1 b2 X 0.283 0.330 0.330 0.287 X 0.287 0.330 0.330 0.296 Y 0.305 0.360 0.339 0.295 Y 0.295 0.339 0.318 0.276 Reference CCT: 9000~5600k Reference CCT: 9000~5600k b3 b4 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAH4500 REV NO: V.1 DATE: MAY/21/2007 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002975 AA2810RWS/Z Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAH4500 REV NO: V.1 DATE: MAY/21/2007 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002975 PACKING & LABEL SPECIFICATIONS AA2810RWS/Z AA2810XXX SPEC NO: DSAH4500 REV NO: V.1 DATE: MAY/21/2007 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002975