3.0x2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA3020ARWC/A WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features glove when handling the LEDs. z 3.0MM All devices, equipment and machinery must be electrically X 2.0MM, 1.4MM HIGH, ONLY MINIMUM grounded. SPACE REQUIRED. z SUITABLE FOR COMPACT OPTOELECTRONIC Applications APPLICATIONS. z LOW POWER CONSUMPTION. z PACKAGE z MOISTURE z backlighting (illuminated advertising , general lighting). SENSITIVITY LEVEL : LEVEL 4. z ELECTROSTATIC z TYP. z traffic signaling. : 2000PCS / REEL. DISCHARGE THRESHOLD (HBM):1000V. COLOR TEMPERATURE:6500K z COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). z OPTICAL z COLOR z RoHS z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z reading lamps. z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). EFFICIENCY:9.5 lm/W(TYP.) REPRODUCTION INDEX:80. COMPLIANT. z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4223 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 1 OF 7 ERP: 1201002952 Selection Guide Note2 Dice Part No. AA3020ARWC/A Lens Type WHITE (InGaN) Note3 luminous Intensity Iv(mcd) @ 20 mA WATER CLEAR Φv (mlm) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 2θ1/2 70 125 630 90° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 300 140 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥16 mm2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage Reverse Current (VR=5V) [Typ.] [Max.] Unit 0.31 - 0.31 - 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) Value 3.2 V 4.0 0.01 IR 10 μA Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 / °C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ± 0.1V. SPEC NO: DSAH4223 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 2 OF 7 ERP: 1201002952 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20mA Φv (mlm) @ 20mA Code. Min. Max. Typ. M 70 130 480 N 110 220 710 P 180 320 960 Q 280 420 1270 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White SPEC NO: DSAH4223 APPROVED: WYNEC AA3020ARWC/A REV NO: V.2 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 3 OF 7 ERP: 1201002952 White SPEC NO: DSAH4223 APPROVED: WYNEC AA3020ARWC/A REV NO: V.2 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 4 OF 7 ERP: 1201002952 AA3020ARWC/A White CIE 0.44 0.43 0.42 0.41 0.40 0.39 c1 0.38 0.37 0.36 b4 0.35 c0 0.34 0.33 b3 0.32 0.31 b1 b2 0.30 a1 0.29 0.28 a0 0.27 0.26 0.25 0.24 0.23 0.22 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 a0 a1 b1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 X 0.283 0.330 0.330 0.287 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Y 0.305 0.360 0.339 0.295 Reference CCT: 14000~9000k Reference CCT: 14000~9000k Reference CCT: 9000~5600k b2 b3 b4 X 0.287 0.330 0.330 0.296 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.295 0.339 0.318 0.276 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~5600k Reference CCT: 9000~7000k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k SPEC NO: DSAH4223 APPROVED: WYNEC Reference CCT: 7600~5600k Reference CCT: 6000~4600k REV NO: V.2 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 5 OF 7 ERP: 1201002952 AA3020ARWC/A Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAH4223 APPROVED: WYNEC Reel Dimension REV NO: V.2 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 6 OF 7 ERP: 1201002952 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAH4223 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu AA3020ARWC/A DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 7 OF 7 ERP: 1201002952