4.1 x 1.0mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION APKA4110TGC GREEN OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z4.1mm x 1.0mm RIGHT ANGLE SMT LED, 1.52mm THICKNESS. Description The Green source color devices are made with InGaN on zLOW POWER CONSUMPTION. SiC Light Emitting Diode. zIDEAL FOR BACKLIGHT AND INDICATOR It is recommended to use a wrist band or zPACKAGE: 2000PCS/REEL. All devices, equipment and machinery must be electrically zWIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. zVARIOUS COLORS AND LENS TYPES AVAILABLE. anti-electrostatic glove when handling the LEDs. zRoHS COMPLIANT. grounded. Package Dimensions N ot es : 1. A l l di m ens i ons are i n m i l l i m et ers (i nc hes ). 2. T ol eranc e i s ± 0. 2 5(0. 01" ) unl es s ot her wi s e not e d. 3. S pec i f i c at i ons a re s ubj e c t t o c hange wi t hout n ot i c e. SPEC NO: '6$D1196 REV NO: V.3 DATE: JUL/04/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN EPR:1204000266-01 Selection Guide Part No. Dice APKA4110TGC Iv (mcd) @ 20mA Lens Type GREEN (InGaN) WATER CLEAR Viewing Angle Min. Typ. 2θ1/2 36 100 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 500 nm IF=20mA Green 505 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 56 pF VF=0V;f=1MHz VF Forward Voltage Green 3.6 4.4 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 110 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: '6$D1196 REV NO: V.3 DATE: JUL/04/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN EPR:1204000266-01 Green APKA4110TGC SPEC NO: '6$D1196 REV NO: V.3 DATE: JUL/04/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN EPR:1204000266-01 APKA4110TGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: '6$D1196 REV NO: V.3 DATE: JUL/04/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN EPR:1204000266-01 PACKING & LABEL SPECIFICATIONS APKA4110TGC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: '6$D1196 REV NO: V.3 DATE: JUL/04/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN EPR:1204000266-01