3.0x2.5mm SURFACE MOUNT LED LAMP APKB3025SURKMGK-F01 HYPER RED MEGA GREEN Features Description OBI -COLOR,LOW POWER CONSUMPTION. The Hyper Red source color devices are made with DH OIDEAL FOR BACKLIGHT AND INDICATOR. The Mega Green source color devices are made with O3.0mmx2.5mm SMT LED, 1.3mm THICKNESS. OWIDE VIEWING ANGLE. OVARIOUS COLORS AND LENS TYPES AVAILABLE. InGaAlP on GaAs substrate Light Emitting Diode. DH InGaAlP on GaAs substrate Light Emitting Diode. OPACKAGE : 2000PCS / REEL. ORoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAE8850 REV NO: V.1 DATE: MAR/29/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000285-01 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type Min. Typ. 70 150 10 50 HYPER RED (InGaAIP) APKB3025SURKMGK-F01 Viewing Angle WATER CLEAR 2 θ 1/2 120° MEGA GREEN (InGaAIP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Mega Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 650 574 nm IF=20mA Hyper Red Mega Green 635 570 nm IF=20mA Spectral Line Half-width Hyper Red Mega Green 28 20 nm IF=20mA C Capacitance Hyper Red Mega Green 35 15 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red Mega Green 1.95 2.1 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Mega Green Units Power dissipation 170 105 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 Operating/Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE8850 REV NO: V.1 DATE: MAR/29/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000285-01 APKB3025SURKMGK-F01 Hyper Red SPEC NO: DSAE8850 REV NO: V.1 DATE: MAR/29/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000285-01 Mega Green SPEC NO: DSAE8850 REV NO: V.1 DATE: MAR/29/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000285-01 APKB3025SURKMGK-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAE8850 REV NO: V.1 DATE: MAR/29/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000285-01