60W Single Output with Battery Charger(UPS Function) PSC-60 series Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protections / Battery polarity protection by fuse Alarm signal for AC OK and Bat. low Cooling by free air convection 100% full load burn-in test 2 years warranty SPECIFICATION OUTPUT INPUT OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 13.8V 13.8V 27.6V 27.6V RATED CURRENT 2.8A 1.5A 1.4A 0.75A CURRENT RANGE 0 ~ 4.3A -------- 0 ~ 2.15A -------- RATED POWER 59.34W RIPPLE & NOISE (max.) Note.2 120mVp-p CH1: 12 ~ 15V VOLTAGE TOLERANCE Note.3 1.0% NOTE -------- -------- 0.5% -------- LOAD REGULATION 0.5% -------- 0.5% -------- SETUP, RISE TIME 800ms, 50ms/230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE 50ms/230VAC 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz 1600ms, 50ms/115VAC at full load 10ms/115VAC at full load 127 ~ 370VDC 84% EFFICIENCY (Typ.) 84% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.6A/115VAC 1A/230VAC COLD START 30A/115VAC 60A/230VAC LEAKAGE CURRENT <1mA / 240VAC OVERLOAD 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1:14.49 ~ 18.63V CH1:28.98 ~ 37.26V BATTERY CUT OFF Protection type : Hiccup mode, recovers automatically after fault condition is removed 21 1V 10.5 0.5V AC OK TTL open collector output, ON : AC OK ; OFF : AC Fail ; Ice : max. 30mA@ 50VDC BATTERY LOW VIBRATION OTHERS -------- CH1: 24 ~ 29V 1.0% -------- WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT (Note 4) 240mVp-p 0.5% WORKING TEMP. EMC -------- LINE REGULATION OVER VOLTAGE SAFETY & 59.34W VOLTAGE ADJ. RANGE PROTECTION FUNCTION PSC-60B PSC-60A MODEL SAFETY STANDARDS WITHSTAND VOLTAGE TTL open collector output, ON : Battery Low ; OFF : Battery OK ; Ice : max. 30mA@ 50VDC Battery low voltage < 22V Battery low voltage < 11V -20 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0~50 ) on CH1 output 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 HARMONIC CURRENT / 70% RH EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A DIMENSION PACKING 101.6*50.8*29mm (L*W*H) 0.13Kg; 96pcs/13.5Kg/0.89CUFT 589.7K hrs min. MIL-HDBK-217F (25 ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 6. Heat Sink HS1,HS2 can not be shorted. 7. Heat Sink HS1 must have safety isolation distance with system case. File Name:PSC-60-SPEC 2008-11-04 PSC-60 60W Single Output with Battery Charger(UPS Function) Mechanical Specification series Unit:mm 101.6 3.175 95.25 3.175 HS2 FS1 50.8 44.45 3 2 1 AC FUSE T2.5A/250V SVR1 1 2 3 4 5 6 CN1 CN2 HS1 29 4- 3.3 3 max. 1.HS1,HS2 can not be shorted. 2.HS1 must have safety isolation distance with system case. AC Input Connector (CN1) : JST B3P-VH or equivalent Pin No. 1 2 3 Assignment AC/N No Pin AC/L Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent DC Output Connector (CN2) : JST B6P-VH or equivalent Pin No. 1 2 3 Assignment Bat. Low AC OK Battery - Pin No. Assignment Battery + 4 DC Output + 5 6 DC Output COM Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent Block Diagram AC OK Bat. Low ALARM CIRCUIT RECTIFIERS & FILTER EMI FILTER I/P RECTIFIERS & FILTER POWER SWITCHING +V -V Bat. + Bat. - DETECTION CIRCUIT FG Battery Charger & Back up Control CONTROL O.L.P. O.V.P. Output Derating VS Input Voltage Output Derating Ta=25 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 90 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:PSC-60-SPEC 2008-11-04