DATA SHEET PHOTOCOUPLER PS2815-1,PS2815-4 HIGH CTR, AC INPUT 4, 16-PIN SOP PHOTOCOUPLER −NEPOC TM Series− DESCRIPTION The PS2815-1 and PS2815-4 are optically coupled isolators containing GaAs light emitting diodes and an NPN silicon phototransistor in a plastic SOP for high density applications. The package is an SOP (Small Outline Package) type for high density mounting applications. FEATURES • AC input response • High current transfer ratio (CTR = 200 % TYP. @ IF = ±1 mA) • High isolation voltage (BV = 2 500 Vr.m.s.) • Small and thin package (4, 16-pin SOP, Pin pitch 1.27 mm) • Ordering number of taping product: PS2815-1-F3, F4, PS2815-4-F3, F4 APPLICATIONS • Programmable logic controllers • Modem/FAX The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. P14764EJ1V1DS00 (1st edition) Date Published May 2000 NS CP(K) Printed in Japan © 2000 PS2815-1,PS2815-4 PACKAGE DIMENSIONS (in millimeters) PS2815-1 2.7±0.3 4 3 PS2815-4 10.3±0.3 4 3 9 16 1 2 8 1.27 0.12 M 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. 0.15 +0.10 –0.05 1.3 2 +0.3 –0.2 0.15 +0.10 –0.05 2 +0.3 –0.2 7.0±0.3 4.4 1 Anode, Cathode Cathode, Anode Emitter Collector 7.0±0.3 4.4 1.3 0.5±0.3 0.1±0.1 2 0.5±0.3 0.4±0.1 1 2 3 4 5 6 7 8 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 0.1±0.1 1 16 15 14 13 12 11 10 9 1.27 0.4±0.1 0.12 M MARKING PS2815-1 15 PS2815-4 JAPAN 503 PS2815-4 N 503 Assembly lot Last number of type No. : 15 No. 1 pin Mark N 5 03 Serial Code in week Assembly Year CTR Rank Name 5 03 Serial Code in week Assembly Year 2 Company & Country Name Type Number Assembly lot Data Sheet P14764EJ1V1DS00 PS2815-1,PS2815-4 ORDERING INFORMATION Part Number PS2815-1 Package 4-pin SOP PS2815-1-F3 Packing Style 50 pcs (Tape 50 pcs cut) Safety Standards Approval UL, BSI approved Application Part *1 Number PS2815-1 Embossed Tape 3 500 pcs/reel PS2815-1-F4 PS2815-4 PS2815-4-F3 16-pin SOP Magazine Case 45 pcs PS2815-4 Embossed Tape 2 500 pcs/reel PS2815-4-F4 *1 For the application of the Safety Standard, following part number should be used. Data Sheet P14764EJ1V1DS00 3 PS2815-1,PS2815-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Ratings Parameter Symbol Unit PS2815-1 Diode Forward Current (DC) ±50 IF Power Dissipation Derating Power Dissipation *1 PS2815-4 mA ∆PD/°C 0.6 0.7 mW/°C PD 60 70 mW/ch IFP ±0.5 A Collector to Emitter Voltage VCEO 40 V Emitter to Collector Voltage VECO 5 V IC 40 mA/ch ∆PC/°C 1.2 mW/°C PC 120 mW/ch Isolation Voltage BV 2 500 Vr.m.s. Operating Ambient Temperature TA −55 to +100 °C Storage Temperature Tstg −55 to +150 °C Peak Forward Current Transistor Collector Current Power Dissipation Derating Power Dissipation *2 *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output 4 Data Sheet P14764EJ1V1DS00 PS2815-1,PS2815-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Symbol Conditions Forward Voltage VF IF = ±5 mA Terminal Capacitance Ct V = 0 V, f = 1 MHz Transistor Collector to Emitter Current ICEO IF = 0 mA, VCE = 40 V Coupled Current Transfer Ratio (IC/IF) CTR IF = ±1 mA, VCE = 5 V Collector Saturation Voltage VCE (sat) RI-O VI-O = 1 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz Rise Time tr *1 Fall Time TYP. MAX. Unit 1.15 1.4 V 60 100 200 IF = ±1 mA, IC = 0.2 mA Isolation Resistance *1 MIN. VCC = 5 V, IC = 2 mA, RL = 100 Ω tf pF 100 nA 400 % 0.3 V Ω 11 10 0.4 pF 4 µs 5 *1 Test circuit for switching time Pulse Input VCC PW = 100 µs Duty cycle = 1/10 IF In monitor VOUT 50 Ω RL = 100 Ω Data Sheet P14764EJ1V1DS00 5 PS2815-1,PS2815-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 60 40 Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 80 PS2815-4 0.7 mW/˚C PS2815-1 0.6 mW/˚C 20 50 25 0 100 75 140 120 100 80 60 40 20 0 25 50 100 75 125 Ambient Temperature TA (˚C) Ambient Temperature TA ( ˚C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 25 100 10 Collector Current IC (mA) Forward Current IF (mA) IF = 20 mA TA = +100 ˚C +60 ˚C +25 ˚C 1 0 ˚C –25 ˚C –50 ˚C 0.1 10 mA 20 5 mA 15 10 2 mA 5 1 mA 0.5 mA Collector to Emitter Dark Current ICEO (nA) 0.01 0.0 0.5 1.0 1.5 0 2.0 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 000 Collector Current IC (mA) 100 1 000 VCE = 20 V 40 V 100 10 1 –25 0 25 50 75 100 10 mA 5 mA 2 mA 10 1 mA 1 0.1 0.0 Ambient Temperature TA (˚C) 6 2 IF = 0.5mA 0.2 0.4 0.6 0.8 Collector Saturation Voltage VCE(sat) (V) Data Sheet P14764EJ1V1DS00 1.0 PS2815-1,PS2815-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 ˚C, IF = 1 mA, VCE = 5 V 0.2 0.0 –50 0 –25 25 50 300 VCE = 5 V, n=3 250 200 150 100 50 0.02 100 75 0.1 1.0 10 100 Ambient Temperature TA (˚C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 100 1 000 Switching Time t (µs) IC = 2 mA, VCC = 5 V, CTR = 200 % Switching Time t (µ s) Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 10 tf tr td 1 tf IF = 1 mA, VCC = 5 V, CTR = 200 % 100 ts tr 10 td 1 ts 0.1 10 100 0.1 100 10 k 1k 1k 100 k Load Resistance RL (kΩ) Load Resistance RL (kΩ) FREQUENCY RESPONSE 10 k LONG TERM CTR DEGRADATION 1.2 –5 100 Ω RL = 1 kΩ –10 300 Ω –15 0.8 TA = 25 ˚C 0.6 TA = 60 ˚C 0.4 0.2 –20 –25 0.1 IF = 1 mA 1.0 CTR (Relative Value) Normalized Gain Gv 0 1 10 100 1 000 0 10 102 103 104 105 106 Time (Hr) Frequency f (kHz) Remark The graphs indicate nominal characteristics. Data Sheet P14764EJ1V1DS00 7 PS2815-1,PS2815-4 TAPING SPECIFICATIONS (in millimeters) PS2815-1 4.0±0.1 2.5±0.1 16.0±0.3 7.5±0.1 1.55±0.1 7.5±0.1 2.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 1.55±0.1 3.3±0.1 4.0±0.1 Tape Direction 15503 15503 15503 15503 15503 15503 15503 15503 15503 PS2815-1-F4 15503 PS2815-1-F3 Outline and Dimensions (Reel) 2.5 R 1.0 φ 21.0±0.8 φ 100±5.0 φ 330 2.0±0.5 φ13.0±0.5 16.4 +2.0 –0.0 Packing: 3 500 pcs/reel 8 Data Sheet P14764EJ1V1DS00 PS2815-1,PS2815-4 PS2815-4 1.55±0.1 2.5±0.1 10.45±0.1 7.5±0.1 1.55±0.1 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 7.6±0.1 12.0±0.1 Tape Direction PS2815-4-F3 PS2815-4-F4 Outline and Dimensions (Reel) 2.5 R 1.0 φ 21.0±0.8 φ 100±5.0 φ 330 2.0±0.5 φ13.0±0.5 16.4 +2.0 –0.0 Packing: 2 500 pcs/reel Data Sheet P14764EJ1V1DS00 9 PS2815-1,PS2815-4 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 235 °C or below (package surface temperature) • Time of temperature higher than 210 °C 30 seconds or less • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature 260 °C or below (molten solder temperature) • Time 10 seconds or less • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet P14764EJ1V1DS00 PS2815-1,PS2815-4 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. Data Sheet P14764EJ1V1DS00 11 PS2815-1,PS2815-4 NEPOC is a trademark of NEC Corporation. • The information in this document is current as of May, 2000. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. • NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. • NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4