Oscilent Corporation IF SAW Filter | 811-IF85.38M-A Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 811-IF85.38M-A 11.6 x 5.0 SMD Mobile Communication June 17 2003 . TYPE : 85.38 MHz Bandpass Filter 1.26 MHz Bandwidth PART NUMBER : 811-IF85.38M-A . Horizontal : 0.5 MHz/Div Veritical : 10 dB/Div Horizontal : 0.2 MHz/Div Veritical : 1 dB/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 85.36 85.38 85.40 MHz Insertion Loss - 10.95 12.5 dB 5dB Bandwidth 1.26 1.31 - MHz Center Frequency - 1.76 1.80 MHz Attenuation at Fo ± 0.9 MHz 33 38 - dB Attenuation at Fo ± 1.25 MHz 33 47 - dB Attenuation at Fo ± 1.7 MHz 33 43 - dB - 0.3 0.7 dB dB 33dB Bandwidth Passband Ripple Ultimate Rejection 35 42 - Substrate Material - Quartz - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_811_if85_38a.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 811-IF85.38M-A Page 2 of 2 L1 = 394.7nH L2 = 470nH C1 = 75pF C2 = 62pF Source/Load Impedance = 50 ohms Part No.: 811-IF85.38M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_811_if85_38a.htm 12/28/2005