OPEN FRAME & ENCLOSED PU 201 Series 1 5 0 - 2 0 0 W AT T S - A C / D C M U LT I P L E O U T P U T SELECTION TABLE OUTPUT #1(4) (1) V1 IMIN. IMAX. TOL. V2 IMIN. IMAX. +5.1 V +5.1 V +5.1 V +12 V +5.1 V +5.1 V +5.1 V +5.1 V +5.1 V +5.1 V +5.1 V +5.1 V +5.1 V +5.1 V +3.3 V 3.0 A 3.0 A 3.0 A 1.0 A 3.0 A 3.0 A 3.0 A 3.0 A 3.0 A 3.0 A 3.0 A 3.0 A 3.0 A 3.0 A 3.0 A 30.0 A 30.0 A 30.0 A 8.7 A 30.0 A 30.0 A 30.0 A 30.0 A 30.0 A 30.0 A 30.0 A 30.0 A 30.0 A 30.0 A 30.0 A ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±3% +12 V +15 V +24 V +24 V +12 V +12 V +15 V +15 V +12 V +12 V +15 V +12 V +12 V +12 V +5.1 V 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 8A 6A 4A 4A 8A 8A 6A 6A 8A 8A 6A 8A 8A 8A 8A MODEL PU201-23B PU201-24B PU201-25B PU201-27B PU201-30B PU201-31B PU201-32B PU201-33B PU201-36B PU201-40B PU201-41B PU201-42B PU201-44B PU201-45B PU201-40-3B OUTPUT #2 (2)(4) OUTPUT #4 (3) OUTPUT #3 TOL. V3 IMIN. ±4% ±4% ±4% ±4% ±4% -5 V 0A ±4% -12 V 0A ±4% -15 V 0A ±4% -12 V 0A ±4% 24 V 0A ±4% -12 V 0A ±4% -15 V 0A ±4% -12 V 0A ±4% -15 V 0A ±4% -12 V 0A ±4% -12 V 0A IMAX. (N/A) (N/A) (N/A) (N/A) 6A 4A 4A 4A 4A 4A 4A 4A 4A 4A 4A TOL. V4 IMIN. IMAX. TOL. MAX. OUTPUT POWER(4) ±4% ±4% ±4% ±4% ±4% ±4% 100W/200W 100W/200W 100W/200W 100W/200W 100W/200W 100W/200W 100W/200W 100W/200W 100W/200W 100W/200W 100W/200W 100W/200W 100W/200W 100W/200W 87.5W/175W (N/A) (N/A) (N/A) ±4% ±4% ±4% ±4% ±4% ±4% ±4% ±4% ±4% ±4% ±4% 5V 24 V 12 V 15 V 24 V 2V (N/A) (N/A) (N/A) (N/A) 0A 6A 0A 4A 0A 4A 0A 4A 0A 4A 0A 4A NOTE: 1. Suffix “B” in model numbers denotes U-bracket form. Change “B” to “C” for enclosed form with cover-and-fan assembly, e.g. PU201-45C. 2. Peak output current is 12 A on +12 V, 9 A on +15 V and 6 A on +24 V. 3. Output #4 is floating. It can be connected externally for positive or negative output. 4. 200 watts for “C” version with a cover-and-fan assembly. 100 watts for “B” version without moving air (maximum current of output #1 & #2 derated to 50%), or 200 watts with 25 CFM forced air provided by user. 5. When the remote Sense facility is not used, +Sense must be connected to +V, and -Sense to return, on P2 connector. 6. All models may be operated at no-load. At no-load, output voltage tolerance increases to ±10%. 7. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 µF tantalum capacitor in parallel with a 0.1 µF ceramic capacitor across the output. 8. Weight 820 grams for U-bracket form, 960 grams for enclosed form. MECHANICAL SPECIFICATIONS PIN CHART MODEL 28 PIN 1 2 Dual output PU201-31B, 32B and 33B V1 V1 PU201-36B only V1 V1 PU201-36B V1 V1 Quad output V1 V1 3 4 5 Com. Ret. Com. Ret. Com. Ret. Com. Ret. Com. Ret. Com. Ret. Com. Ret. Com. Ret. Com. Ret. Com. Ret. Com. Ret. Com. Ret. 6 7 8 9 V2 N.C. N.C. N.C. V2 V3 N.C. N.C. V2 N.C. V3 Return +V3 V2 V3 V4 Return +V4 1 2 3 Fan +V Fan +V Fan +V Com. Ret. Com. Ret. Com. Ret. Com. Ret. Com. Ret. Com. Ret. 4 Fan +V Com. Ret. Com. Ret. PFD PFD PFD PFD 1 2 Inhibit Inhibit +V -V Inhibit Inhibit +V -V Inhibit Inhibit +V -V Inhibit Inhibit +V -V Doc. No. PBC9 Rev.C 28-4-11