PS22053
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
Intellimod™ Module
Dual-In-Line Intelligent
Power Module
10 Amperes/1200 Volts
A
D
K
1 2
3 4
5 6
7 8
DETAIL "A"
9 10
HEATSINK
SIDE
11 12 13 14 15 16 17 18 19 20 21
E
B
LABEL
U
G
H
F
L
22
23
M
24
25
26
27
J
28
O
DETAIL "A"
N
DETAIL "C"
DETAIL "B"
R
C
S
T
S
P
0 ~ 5°
Q
HEATSINK SIDE
R
V
W
V
CC
X
30°
AA Z
Y
EE
DETAIL "A"
DD
30°
Z AA
BB
DETAIL "B"
DETAIL "C"
LEADS THICKNESS = 0.7mm
ALL TERMINALS TREATED BY Pb-FREE SOLDER PLATING
TERMINAL CODE
1 VUFS
2 VUFB
3 VP1
4 UP
5 VVFS
6 VVFB
7 VP1
8 VP
9 VWFS
10 VWFB
11 VP1
12 VPC
13 WP
14 VN1
15
16
17
18
19
20
21
22
23
24
25
26
27
28
VNC
CIN
CFO
FO
UN
VN
WN
P
U
V
W
NU
NV
NW
Outline Drawing and Circuit Diagram
Dimensions
A
B
C
D
E
F
G
H
J
K
L
M
N
O
P
Rev. 10/05
Inches
3.11±0.02
1.73±0.02
0.63±0.01
3.0
1.08±0.02
0.80±0.02
1.91±0.02
1.34±0.02
1.67±0.02
0.10±0.01
0.73±0.02
0.31±0.01
2.64±0.01
0.40±0.01
0.32±0.02
Millimeters
79.0±0.5
44.0±0.5
16.1±0.3
76.2
27.4±0.5
20.4±0.5
48.6±0.5
34.0±0.5
42.5±0.5
2.54±0.3
18.5±0.5
8.0±0.3
67.0±0.3
10.16±0.3
8.2±0.5
Dimensions
Inches
Millimeters
Q
0.09
2.5
R
0.08
2.0
S
0.01
0.3
T
0.07
1.7
U
0.18±0.008 Dia. 4.5±0.2 Dia.
V
0.024
0.6
W
0.039±0.008
1.0±0.2
X
0.06±0.008
1.5±0.2
Y
0.05
1.2
Z
0.02
0.5
AA
0.024±0.02
0.6±0.5
BB
0.098
2.5
CC
0.031±0.008
0.8±0.2
DD
0.051±0.008
1.3±0.2
EE
0.04
1.0
Description:
DIP-IPMs are intelligent power
modules that integrate power
devices, drivers, and protection
circuitry in an ultra compact
dual-in-line transfer-mold package
for use in driving small three
phase motors. Use of 4th
generation IGBTs, DIP packaging,
and application specific HVICs
allow the designer to reduce
inverter size and overall design
time.
Features:
£ Compact Packages
£ Single Power Supply
£ Integrated HVICs
£ Direct Connection to CPU
Applications:
£ Washing Machines
£ Refrigerators
£ Air Conditioners
£ Small Servo Motors
£ Small Motor Control
Ordering Information:
PS22053 is a 1200V, 10 Ampere
DIP Intelligent Power Module.
1
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PS22053
Intellimod™ Module
Dual-In-Line Intelligent Power Module
10 Amperes/1200 Volts
Absolute Maximum Ratings, Tj = 25°C unless otherwise specified
Characteristics
Symbol
PS22053
Units
Tj
-20 to 125
°C
Module Case Operation Temperature (See Note 1)
TC
-20 to 100
°C
Storage Temperature
Tstg
-40 to 125
°C
Mounting Torque, M4 Mounting Screws
—
13
in-lb
Module Weight (Typical)
—
77
Grams
Power Device Junction Temperature*
Self-protection Supply Voltage Limit (Short Circuit Protection Capability)**
VCC(prot.)
Heatsink Flatness (See Note 2)
Isolation Voltage, AC 1 minute, 60Hz Sinusoidal, Connection Pins to Heatsink Plate
VISO
800
Volts
-50 to 100
µm
2500
Volts
*The maximum junction temperature rating of the power chips integrated within the DIP-IPM is 150°C (@TC ≤ 100°C). However, to ensure safe operation of the DIP-IPM,
the average junction temperature should be limited to Tj(avg) ≤ 125°C (@TC ≤ 100°C).
**VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125°C, Non-repetitive, Less than 2µs
IGBT Inverter Sector
Collector-Emitter Voltage
VCES
1200
Volts
±IC
10
Amperes
Collector Current (TC = 25°C)
Peak Collector Current (TC = 25°C, <1ms)
±ICP
20
Amperes
Supply Voltage (Applied between P-NU, NV, NW)
VCC
900
Volts
VCC(surge)
1000
Volts
PC
40
Watts
VD
20
Volts
Supply Voltage, Surge (Applied between P-NU, NV, NW)
Collector Dissipation (TC = 25°C, per 1 Chip)
Control Sector
Supply Voltage (Applied between VP1-VPC, VN1-VNC)
Supply Voltage (Applied between VUFB-VUFS, VVFB-VVFS, VWFB-VWFS)
VDB
20
Volts
Input Voltage (Applied between UP, VP, WP-VPC, UN, VN, WN-VNC)
VIN
-0.5 ~ VD+0.5
Volts
Fault Output Supply Voltage (Applied between FO-VNC)
VFO
-0.5 ~ VD+0.5
Volts
Fault Output Current (Sink Current at FO Terminal)
IFO
1
mA
Current Sensing Input Voltage (Applied between CIN-VNC)
VSC
-0.5 ~ VD+0.5
Volts
Note 1 – TC Measure Point
Note 2 – Flatness Measurement Position
CONTROL TERMINALS
MEASUREMENT POINT
+
3.25mm
–
HEATSINK
BOUNDARY
HEATSINK
POWER TERMINALS
TC POINT
–
+
2
HEATSINK
Rev. 10/05
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PS22053
Intellimod™ Module
Dual-In-Line Intelligent Power Module
10 Amperes/1200 Volts
Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified
Characteristics
Symbol
Test Conditions
Min.
Typ.
Max.
Units
IGBT Inverter Sector
Collector-Emitter Saturation Voltage
Diode Forward Voltage
VCE(sat)
VEC
Inductive Load Switching Times
IC = 10A, Tj = 25°C, VD = VDB = 15V, VIN = 5V
—
2.7
3.4
Volts
IC = 10A, Tj = 125°C, VD = VDB = 15V, VIN = 5V
—
2.5
3.2
Volts
-IC = 10A, VIN = 0V
ton
2.5
3.0
Volts
1.5
2.2
µs
trr
VCC = 600V, VD = VDB = 15V,
—
0.2
—
µs
tC(on)
IC = 10A, Tj = 125°C, VIN = 0 ⇔ 5V,
—
0.4
0.7
µs
toff
Inductive Load (Upper-Lower Arm)
—
2.8
3.8
µs
—
0.4
0.7
µs
tC(off)
Collector-Emitter Cutoff Current
—
0.8
ICES
VCE = VCES, Tj = 25°C
—
—
1.0
mA
VCE = VCES, Tj = 125°C
—
—
10
mA
Total of VP1-VPC, VN1-VNC
—
—
3.70
mA
Control Sector
Circuit Current
ID
VIN = 5V
VD = VDB = 15V
Fault Output Voltage
Input Current
Short Circuit Trip Level*
VUFB-VUFS, VVFB-VVFS, VWFB-VWFS
—
—
1.30
mA
VIN = 0V
Total of VP1-VPC, VN1-VNC
—
—
3.50
mA
VUFB-VUFS, VVFB-VVFS, VWFB-VWFS
—
—
1.30
mA
VFOH
VSC = 0V, FO Terminal Pull-up to 5V by 10kΩ
4.9
—
—
Volts
VFOL
VSC = 1V, IFO = 1mA
—
—
1.10
Volts
IIN
VIN = 5V
0.70
1.5
2.00
mA
VSC(ref)
VD = 15V
0.43
0.48
0.53
Volts
UVDBt
Trip Level, Tj ≤ 125°C
10.0
—
12.0
Volts
UVDBr
Reset Level, Tj ≤ 125°C
10.5
—
12.5
Volts
UVDt
Trip Level, Tj ≤ 125°C
10.3
—
12.5
Volts
UVDr
Reset Level, Tj ≤ 125°C
10.8
—
13.0
Volts
tFO
CFO = 22nF
1.6
2.4
—
ms
ON Threshold Voltage
Vth(on)
Applied between UP, VP, WP-VPC,
2.5
3.0
4.2
Volts
OFF Threshold Voltage
Vth(off)
UN, VN, WN-VNC
0.8
1.4
2.0
Volts
Supply Circuit Under-voltage
Fault Output Pulse Width**
* Short Circuit protection is functioning only for N-side IGBTs. Please select the value of the external shunt resistance such that the SC trip level is less than 1.7 times the current rating.
**Fault output is asserted when the lower arms short circuit or control supply under-voltage protection function operates. The fault output pulse-width tFO depends on the capacitance value
of CFO according to the following approximate equation: CFO = (9.3 x 10-6) x tFO {F} .
Rev. 10/05
3
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PS22053
Intellimod™ Module
Dual-In-Line Intelligent Power Module
10 Amperes/1200 Volts
Thermal Characteristics
Characteristic
Symbol
Condition
Min.
Typ.
Max.
Units
Junction to Case
Rth(j-c)Q
IGBT Part (Per 1/6 Module)
—
—
2.00
°C/Watt
Thermal Resistance
Rth(j-c)D
FWDi Part (Per 1/6 Module)
—
—
2.67
°C/Watt
Contact Thermal resistance
Rth(c-f)
Per 1 Module
—
—
0.047
°C/Watt
Min.
Typ.
Value
Units
Recommended Conditions for Use
Characteristic
Symbol
Supply Voltage
Control Supply Voltage
Condition
VCC
Applied between P-NU, NV, NW
350
600
800
Volts
VD
Applied between VP1-VPC, VN1-VNC
13.5
15.0
16.5
Volts
Applied between
13.5
15.0
16.5
Volts
VDB
VUFB-VUFS, VVFB-VVFS, VWFB-VWFS
Control Supply Variation
dVD, dVDB
—
-1
—
1
V/µs
Arm Shoot-through Blocking Time
tDEAD
For Each Input Signal, TC ≤ 100°C
3.3
—
—
µs
PWM Input Frequency
fPWM
Tj ≤ 125°C, TC ≤ 100°C
—
—
15
kHz
Output r.m.s. Current*
IO
VCC = 600V, VD = VDB = 15V, fC = 5kHz
—
—
7.6
Arms
—
—
4.2
Arms
—
1.5
—
—
µs
P.F. = 0.8, Sinusoidal PWM, Tj ≤ 125°C, Tf ≤ 100°C
VCC = 600V, VD = VDB = 15V, fC = 15kHz
P.F. = 0.8, Sinusoidal PWM, Tj ≤ 125°C, Tf ≤ 100°C
Allowable Minimum Input
PWIN(on)**
Pulse Width
PWIN(off)***
IC ≤ 10A
350 ≤ VCC ≤ 800V, 13.5 ≤ VD ≤ 16.5V,
2.5
—
—
µs
10 < IC ≤ 17A
13.5 ≤ VDB ≤ 16.5V, -20 ≤ TC ≤ 100°C
2.7
—
—
µs
VNC
Between VNC-NU, NV, NW (Including Surge)
-5.0
—
5.0
Volts
N Line Wiring Inductance Less than 10nH
VNC Voltage Variation
*The allowable r.m.s. current also depends on the user application conditions.
**DIP-IPM might make no response to the input ON signal with pulse width less than PWIN(on).
***DIP-IPM might make no response or not work properly if the input OFF signal pulse width is less than PWIN(off).
4
Rev. 10/05
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PS22053
Intellimod™ Module
Dual-In-Line Intelligent Power Module
10 Amperes/1200 Volts
Application Circuit
+5V
+15V
RSF
CSF
21
R3
28
WN
VN
FAULT
LOGIC
VNC
C2
VN1
+VCC
WP
VP
VP1
C2
C2
C1
D1
C1
U
VP1
C2
AC LINE
C6
C7
C6
P
+
+
VUFB
+
R1
VVFS
UP
C5
R2
MOTOR
V
VVFB
+
R1
W
GATE DRIVE
UV PROT.
D1
HVIC
C5
+VCC
R2
C2
HVIC
C1
This symbol
indicates
connection to
ground plane.
VWFS
+VCC
R1
GATE DRIVE
UV PROT.
VWFB
+
NU
GATE DRIVE
UV PROT.
D1
HVIC
C2
RSHUNT
LEVEL SHIFT
+VCC
CONTROLLER
VP1
NV
LVIC
LEVEL SHIFT
VPC
C5
R2
UV
PROT.
INPUT
CONDITION
+
C4
INPUT
CONDITION
C3
CIN
INPUT
CONDITION
C5 x 3
NW
GATE DRIVE
FO
CFO
OVER
CURRENT
PROTECTION
INPUT SIGNAL
CONDITIONING
UN
LEVEL SHIFT
R2 x 3
C2
22
VUFS
1
Component Selection:
Dsgn.
Typ. Value
Description
D1
C1
1A, 1200V
Boot strap supply diode – Ultra fast recovery
10-100uF, 50V
Boot strap supply reservoir – Electrolytic, long life, low impedance, 105°C (Note 5)
C2
C3
0.22-2.0uF, 50V
Local decoupling/High frequency noise filters – Multilayer ceramic (Note 8)
10-100uF, 50V
Control power supply filter – Electrolytic, long life, low Impedance, 105°C
C4
C5
22nF, 50V
Fault lock-out timing capacitor – Multilayer ceramic (Note 4)
100pF, 50V
Optional input signal noise filter – Multilayer ceramic (Note 1)
C6
C7
200-2000uF, 450V
Main DC bus filter capacitor – Electrolytic, long life, high ripple current, 105°C
0.1-0.22uF, 1000V
Surge voltage suppression capacitor – Polyester/polypropylene film (Note 9)
CSF
RSF
1000pF, 50V
Short circuit detection filter capacitor – Multilayer ceramic (Note 6, Note 7)
1.8k ohm
Short circuit detection filter resistor (Note 6, Note 7)
RSHUNT
R1
5-100 mohm
Current sensing resistor – Non-inductive, temperature stable, tight tolerance (Note 10)
10 ohm
Boot strap supply inrush limiting resistor (Note 5)
R2
R3
330 ohm
Optional control input noise filter (Note 1, Note 2)
10k ohm
Fault output signal pull-up resistor (Note 3)
Notes:
1) To prevent input signal oscillations minimize wiring length to controller (~2cm). Additional RC filtering (C5 etc.) may be
required. If filtering is added be careful to maintain proper dead time and voltage levels. See application notes for details.
2) Internal HVIC provides high voltage level shifting allowing direct connection of all six driving signals to the controller.
3) FO output is an open collector type. Pull up resistor (R3) should be adjusted to current sink capability of the controller.
4) C4 sets the fault output duration and lock-out time. C4 ≈ 9.3E-6 x tFO, 22nF gives ~2.4ms.
5) Boot strap supply component values must be adjusted depending on the PWM frequency and technique.
6) Wiring length associated with RSHUNT, RSF, CSF must be minimized to avoid improper operation of the OC function.
7) RSF, CSF set over circuit protection trip time. Recommend time constant is 1.5us-2.0us. See application notes.
8) Local decoupling/high frequency filter capacitors must be connected as close as possible to the modules pins.
9) The length of the DC link wiring between C6, C7, the DIP’s P terminal and the shunt must be minimized to prevent
excessive transient voltages. In particular, C7 should be mounted as close to the DIP as possible.
10) Use a high quality, tight tolorance current sensing resistor. Connect resistor as close as possible to the DIP’s
N terminal. Be careful to check for proper power rating. See application notes for calculation of resistance value.
Rev. 10/05
5
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PS22053
Intellimod™ Module
Dual-In-Line Intelligent Power Module
10 Amperes/1200 Volts
Protection Function Timing Diagrams
Short-Circuit Protection (N-side only, with external shunt resistor and CR filter)
A7
LOWER-SIDE
CONTROL INPUT
A6
PROTECTION
CIRCUIT STATE
SET
RESET
A3
INTERNAL IGBT GATE
SC
A1
A2
A4
A8
OUTPUT CURRENT IC
SC REFERENCE VOLTAGE
SENSE VOLTAGE ON
THE SHUNT RESISTOR
FAULT OUTPUT FO
A5
RC FILTER TIME
CONSISTANT DELAY
A1: Normal operation – IGBT turn on and conducting current.
A2: Short-circuit current detected (SC trigger).
A3: IGBT gate hard interrupted.
A4: IGBT turn off.
A5: FO output with a fixed pulse width (determined by the external capacitance CFO).
A6: Input “L” – IGBT off.
A7: Input “H” – IGBT on is blocked during the FO output period.
A8: IGBT stays in off state.
Under-Voltage Protection (N-side, UVD)
CONTROL INPUT
PROTECTION
CIRCUIT STATE
RESET
UVDr
CONTROL SUPPLY
VOLTAGE VD
SET
B1
UVDt
B2
RESET
B6
B3
B4
B7
OUTPUT CURRENT IC
FAULT OUTPUT FO
B5
B1: Control supply voltage rise – After the voltage level reaches UVDr, the drive circuit begins to work
at the rising edge of the next input signal.
B2 : Normal operation – IGBT turn on and conducting current.
B3: Under-voltage trip (UVDt).
B4: IGBT turn off regardless of the control input level.
B5: FO asserted during the period from minimum pulse width or until control supply recover to UVDr.
B6: Under-voltage reset (UVDr).
B7: Normal operation – IGBT turn on and conducting current.
6
Rev. 10/05
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PS22053
Intellimod™ Module
Dual-In-Line Intelligent Power Module
10 Amperes/1200 Volts
Protection Function Timing Diagrams
Under-Voltage Protection (P-side, UVDB)
CONTROL INPUT
PROTECTION
CIRCUIT STATE
RESET
UVDBr
CONTROL SUPPLY
VOLTAGE VDB
SET
C1
UVDt
RESET
C5
C3
C2
C4
C6
OUTPUT CURRENT IC
HIGH LEVEL MEANS NO FO OUTPUT
FAULT OUTPUT FO
C1: Control supply voltage rises – After the voltage level reaches UVDBr, the drive circuit begins to work
at the rising edge of the next input signal.
C2: Normal operation – IGBT turn on and conducting current.
C3: Under-voltage trip (UVDBt).
C4: IGBT stays off regardless of the control input level, but there is no FO signal output.
C5: Under-voltage reset (UVDr).
C6: Normal operation – IGBT turn on and conducting current.
Typical Interface Circuit
5V LINE
DIP-IPM
10kΩ
UP, VP, WP, UN, VN, WN
MCU
2.5kΩ (MIN)
FO
VNC (LOGIC)
NOTE: RC coupling at each input
(parts shown dotted) may change
depending on the PWM control
scheme used in the application
and the wiring impedance of the
printed circuit board. The DIP-IPM
input signal section integrates a
2.5kΩ (min) pull-down resistor.
Therefore, when using an external
filtering resistor, care must be
taken to satisfy the turn-on
threshold voltage requirement.
Wiring Method Around Shunt Resistor
Wiring inductance should be less than 10nH.
DIP-IPM
RSHUNT (Chip type resistor is recommended.)
NU
NV
VNC
NW
This GND wiring from VNC should be as
close to the shunt resistors as possible.
Rev. 10/05
7
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PS22053
Intellimod™ Module
Dual-In-Line Intelligent Power Module
10 Amperes/1200 Volts
COLLECTOR-EMITTER
SATURATION VOLTAGE CHARACTERISTICS
(TYPICAL - INVERTER PART)
OUTPUT CHARACTERISTICS
(TYPICAL - INVERTER PART)
13.5
8
6
4
2
0
1.5
2.0
2.5
1.0
VD = VDB = 15V
Tj = 25°C
Tj = 125°C
0.5
0
2
4
6
8
10
2.2
IC = 6A
1.8
1.4
1.0
13
12
Tj = 25°C
Tj = 125°C
IC = 2A
14
15
16
17
SUPPLY VOLTAGE, VD, (VOLTS)
FREE-WHEEL DIODE
FORWARD CHARACTERISTICS
(TYPICAL - INVERTER PART)
REVERSE RECOVERY CHARACTERISTICS
(TYPICAL - INVERTER PART N-SIDE)
REVERSE RECOVERY CHARACTERISTICS
(TYPICAL - INVERTER PART N-SIDE)
8
6
4
VD = 15V
Tj = 25°C
Tj = 125°C
2
1.2
1.6
2.0
2.4
16
103
VCC = 600V
VCIN = 0 ⇔ 5V
VD = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
12
REVERSE RECOVERY TIME, trr, (ns)
REVERSE RECOVERY CURRENT, Irr, (AMPERES)
10
8
4
0
0
2
4
6
8
10
102
VCC = 600V
VCIN = 0 ⇔ 5V
VD = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
101
12
0
2
4
6
8
10
EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS)
COLLECTOR CURRENT, IC, (AMPERES)
COLLECTOR CURRENT, IC, (AMPERES)
REVERSE RECOVERY CHARACTERISTICS
(TYPICAL - INVERTER PART P-SIDE)
REVERSE RECOVERY CHARACTERISTICS
(TYPICAL - INVERTER PART P-SIDE)
SWITCHING LOSS (ON) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART N-SIDE)
16
103
12
8
4
0
2
4
6
8
10
COLLECTOR CURRENT, IC, (AMPERES)
12
2.0
SWITCHING LOSS, PSW(on), (mJ/PULSE)
VCC = 600V
VCIN = 0 ⇔ 5V
VD = VDB = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
REVERSE RECOVERY TIME, trr, (ns)
COLLECTOR CURRENT, -IC, (AMPERES)
REVERSE RECOVERY CURRENT, Irr, (AMPERES)
1.5
COLLECTOR-CURRENT, IC, (AMPERES)
0
0.8
8
2.0
IC = 10A
2.6
COLLECTOR-EMITTER VOLTAGE, VCE(sat), (VOLTS)
12
0
2.5
0
3.0
COLLECTOR-EMITTER
SATURATION VOLTAGE, VCE(sat), (VOLTS)
VD = 16.5V
10
3.0
3.0
15
Tj = 25°C
COLLECTOR-EMITTER
SATURATION VOLTAGE, VCE(sat), (VOLTS)
COLLECTOR CURRENT, IC, (AMPERES)
12
COLLECTOR-EMITTER SATURATION VOLTAGE
VS. SUPPLY VOLTAGE CHARACTERISTICS
(TYPICAL - INVERTER PART)
102
VCC = 600V
VCIN = 0 ⇔ 5V
VD = VDB = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
101
0
2
4
6
8
10
COLLECTOR CURRENT, IC, (AMPERES)
12
12
VCC = 600V
VCIN = 0 ⇔ 5V
VD = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
1.6
1.2
0.8
0.4
0
0
2
4
6
8
10
12
COLLECTOR CURRENT, IC, (AMPERES)
Rev. 10/05
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PS22053
Intellimod™ Module
Dual-In-Line Intelligent Power Module
10 Amperes/1200 Volts
SWITCHING LOSS (OFF) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART N-SIDE)
1.2
0.8
0.4
0
2
4
6
8
10
0
2
4
6
8
10
1.2
0.8
0.4
0
12
0
2
4
6
8
10
COLLECTOR CURRENT, IC, (AMPERES)
SWITCHING TIME (ON) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART N-SIDE)
SWITCHING TIME (OFF) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART N-SIDE)
SWITCHING TIME (ON) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART P-SIDE)
104
VCC = 600V
VCIN = 0 ⇔ 5V
VD = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
2
0
4
6
8
10
103
VCC = 600V
VCIN = 0 ⇔ 5V
VD = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
102
12
0
2
4
6
8
10
103
101
12
VCC = 600V
VCIN = 0 ⇔ 5V
VD = VDB = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
102
0
2
4
6
8
10
COLLECTOR CURRENT, IC, (AMPERES)
COLLECTOR CURRENT, IC, (AMPERES)
COLLECTOR CURRENT, IC, (AMPERES)
SWITCHING TIME (OFF) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART P-SIDE)
SWITCHING TIME (ON) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART N-SIDE)
SWITCHING TIME (OFF) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART N-SIDE)
SWITCHING TIME, tc(on), (ns)
VCC = 600V
VCIN = 0 ⇔ 5V
VD = VDB = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
102
0
2
4
6
8
10
COLLECTOR CURRENT, IC, (AMPERES)
Rev. 10/05
12
102
VCC = 600V
VCIN = 0 ⇔ 5V
VD = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
101
12
103
103
103
12
104
SWITCHING TIME, ton, (ns)
SWITCHING TIME, toff, (ns)
SWITCHING TIME, ton, (ns)
0.4
1.6
COLLECTOR CURRENT, IC, (AMPERES)
104
SWITCHING TIME, toff, (ns)
0.8
VCC = 600V
VCIN = 0 ⇔ 5V
VD = VDB = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
COLLECTOR CURRENT, IC, (AMPERES)
103
101
1.2
0
12
104
102
1.6
SWITCHING TIME, tc(off), (ns)
0
2.0
VCC = 600V
VCIN = 0 ⇔ 5V
VD = VDB = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
SWITCHING LOSS, PSW(off), (mJ/PULSE)
1.6
SWITCHING LOSS (OFF) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART P-SIDE)
2.0
VCC = 600V
VCIN = 0 ⇔ 5V
VD = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
SWITCHING LOSS, PSW(on), (mJ/PULSE)
SWITCHING LOSS, PSW(off), (mJ/PULSE)
2.0
SWITCHING LOSS (ON) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART P-SIDE)
0
2
4
6
8
10
COLLECTOR CURRENT, IC, (AMPERES)
12
102
VCC = 600V
VCIN = 0 ⇔ 5V
VD = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
101
0
2
4
6
8
10
12
COLLECTOR CURRENT, IC, (AMPERES)
9
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PS22053
Intellimod™ Module
Dual-In-Line Intelligent Power Module
10 Amperes/1200 Volts
SWITCHING TIME (ON) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART P-SIDE)
SWITCHING TIME (OFF) VS.
COLLECTOR CURRENT
(TYPICAL - INVERTER PART P-SIDE)
103
VCC = 600V
VCIN = 0 ⇔ 5V
VD = VDB = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
0
2
4
6
8
0
2
4
6
8
1
VD = 15V
Vth(on)
Vth(off)
0
-30
12
30
90
150
JUNCTION TEMPERATURE, Tj, (°C)
THRESHOLD VOLTAGE VS.
JUNCTION TEMPERATURE
(TYPICAL - CONTROL PART P-SIDE)
TRIP LEVEL CONTROL SUPPLY UNDERVOLTAGE VS. JUNCTION TEMPERATURE
(TYPICAL - CONTROL PART N-SIDE)
TRIP LEVEL CONTROL SUPPLY UNDERVOLTAGE VS. JUNCTION TEMPERATURE
(TYPICAL - CONTROL PART P-SIDE)
13
2
1
VD = 15V
Vth(on)
Vth(off)
30
90
13
12
11
VD = 15V
UVDt
UVDr
10
-30
150
TRIP LEVEL CONTROL SUPPLY
UNDER-VOLTAGE, UVDBt, UVDBr, (VOLTS)
3
0
-30
30
90
12
11
VD = 15V
UVDBt
UVDBr
10
-30
150
30
90
150
JUNCTION TEMPERATURE, Tj, (°C)
JUNCTION TEMPERATURE, Tj, (°C)
JUNCTION TEMPERATURE, Tj, (°C)
SHORT CIRCUIT TRIP LEVEL VOLTAGE
VS. JUNCTION TEMPERATURE
(TYPICAL - CONTROL PART N-SIDE)
CIRCUIT CURRENT VS.
DUTY CHARACTERISTICS
(TYPICAL - CONTROL PART)
CIRCUIT CURRENT VS.
DUTY CHARACTERISTICS
(TYPICAL - CONTROL PART)
1.8
1.8
20kHz
1.5
CIRCUIT CURRENT, IDL, (mA)
0.48
0.46
0.44
0.42
15
1.2
10
0.9
7
0.6
5
3
VCIN = 0 ⇔ 5V
VD = 15V
Tj = 25°C
0.3
VD = 15V
0.40
-30
30
90
JUNCTION TEMPERATURE, Tj, (°C)
150
0
0
20
20kHz
1.5
40
60
DUTY, (%)
80
100
CIRCUIT CURRENT, IDB, (mA)
0.50
10
10
2
COLLECTOR CURRENT, IC, (AMPERES)
TRIP LEVEL CONTROL SUPPLY
UNDER-VOLTAGE, UVDt, UVDr, (VOLTS)
THRESHOLD
VOLTAGE, Vth(on), Vth(on), (VOLTS)
VCC = 600V
VCIN = 0 ⇔ 5V
VD = VDB = 15V
Tj = 25°C
Tj = 125°C
INDUCTIVE LOAD
3
COLLECTOR CURRENT, IC, (AMPERES)
4
SHORT CIRCUIT TRIP
LEVEL VOLTAGE, VSC(ref), (VOLTS)
102
101
12
10
4
THRESHOLD
VOLTAGE, Vth(on), Vth(off), (VOLTS)
102
SWITCHING TIME, tc(off), (ns)
SWITCHING TIME, tc(on), (ns)
103
101
THRESHOLD VOLTAGE VS. JUNCTION
TEMPERATURE CHARACTERISTICS
(TYPICAL - CONTROL PART N-SIDE)
15
1.2
10
0.9
0.6
7
5
3
0.3
0
VCIN = 0 ⇔ 5V
VD = VDB = 15V
0
20
40
60
80
100
DUTY, (%)
Rev. 10/05