ECO-PACTM 1 Fast Recovery Epitaxial Diode (FRED) PSEI 2x61 IFAVM VRRM t rr = 2x 60 A = 400/600 V = 35 ns Preliminary Data Sheet Type VRSM VRRM (V) (V) 440 400 PSEI 2x61/04 640 600 PSEI 2x61/06 Symbol Test Conditions IFRMS I FAVM* I FRM IFSM TVJ = TVJM ∫ i dt 2 TVJ TVJM Tstg VISOL Maximum Ratings TC = 70 °C, rectangular, d=0.5 100 A 60 A tP<10µs; rep.rating, pulse widthlimited by TVJM 800 A TVJ = 45 °C t = 10 ms (50 Hz), sine 550 A VR = 0 t = 8.3 ms (60 Hz), sine 600 A TVJ = 125 °C t = 10 ms (50 Hz), sine 480 A VR = 0 t = 8.3 ms (60 Hz), sine 520 A TVJ = 45 °C t = 10 ms (50 Hz), sine 1510 A²s VR = 0 t = 8.3 ms (60 Hz), sine 1490 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 1150 A²s VR = 0 1120 A²s -40... + 150 150 °C °C -40... + 150 °C 50/60 Hz, RMS t = 1 min 2500 V∼ IISOL ≤ 1 mA 3000 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g t = 8.3 ms (60 Hz), sine t=1s Md Mounting torque Weight typ. Symbol Test Conditions IR TVJ = 25°C, VR=VRRM TVJ = 25°C, VR=0.8.VRRM TVJ = 125°C, VR=0.8.VRRM max. max. max. 200 100 14 µA µA mA VF IF = 60 A, TVJ = 150 °C max. 1.50 V TVJ = 25 °C max. 1.80 V VTO rT RthJC RthCH I RM (M4) Characteristic Value For power-loss calculations only 1.13 V 4.7 mΩ 0.7 K/W 0.05 K/W typ. 19 A typ. 35 ns 11.2 11.2 50 mm mm m/s² per diode; max. per diode; typ. IF=60A; -diF/dt=480A/µs; VR=350V Features • • • • • 2 independent FRED in 1 package Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop • • • Very short recovery time Soft recovery behaviour Leads suitable for PC board soldering UL registered, E 148688 Applications • • • • • • • • Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability Low noise switching Small and light weight L≤0.05 mH; TVJ= 100°C trr IF=1A; -diF/dt=200A/µs; VR=30V; TVJ= 25°C ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration Data according to IEC 60747 refer to a single diode unless otherwise stated *IFAVM rating includes blocking losses at TVJM; VR=0.8 VRRM; duty cycle d=0.5 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 1 Fig. 1 Forward current versus voltage drop. Fig. 2 Recovery charge versus -diF/dt. Fig. 3 Peak reverse current versus -diF/dt. Fig. 4 Dynamic parameters versus junction temperature. Fig. 5 Recovery time versus -diF/dt. Fig. 6 Peak forward voltage versus diF/dt. Package style and outline Dimensions in mm (1mm = 0.0394“) Fig. 7 Transient thermal impedance junction to case. 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20