DSEI 2x 61 Fast Recovery Epitaxial Diode (FRED) VRRM V V 1000 1000 miniBLOC, SOT-227 B E72873 Type DSEI 2x 61-10B Symbol Test Conditions Maximum Ratings (per diode) IFRMS IFAVM ÿÿ① IFRM TVJ = TVJM TC = 50°C; rectangular, d = 0.5 tP < 10 ms; rep. rating, pulse width limited by TVJM 100 60 800 A A A IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 500 540 A A TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 450 480 A A 1150 1200 A2s A2s 1000 950 2 As A2s -40...+150 150 -40...+150 °C °C °C 180 W 2500 V~ Features ● ● ● I2t TVJ = 45°C t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ TVJM Tstg Ptot TC = 25°C VISOL 50/60 Hz, RMS IISOL £ 1 mA Md ● ● ● ● ● Applications ● ● ● ● Mounting torque Terminal connection torque (M4) 1.5/13 1.5/13 Weight 30 Nm/lb.in. Nm/lb.in. g ● ● ● Symbol Test Conditions Characteristic Values (per diode) typ. max. IR TVJ = 25°C TVJ = 25°C TVJ = 125°C VR = VRRM VR = 0.8 • VRRM VR = 0.8 • VRRM 3 0.5 14 mA mA mA VF IF = 60 A; TVJ = 150°C TVJ = 25°C 1.8 2.3 V V VT0 rT For power-loss calculations only TVJ = TVJM 1.43 6.1 V mW ● 0.7 0.05 K/W K/W trr IF = 1 A; -di/dt = 200 A/ms; VR = 30 V; TVJ = 25°C 35 50 ns IRM VR = 540 V; IF = 60 A; -diF/dt = 480 A/ms L £ 0.05 mH; TVJ = 100°C 32 36 A ① IFAVM rating includes reverse blocking losses at TVJM, VR = 0.8 VRRM, duty cycle d = 0.5 Data according to IEC 60747 IXYS reserves the right to change limits, test conditions and dimensions © 2000 IXYS All rights reserved Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages ● RthJC RthCK International standard package miniBLOC (ISOTOP compatible) Isolation voltage 2500 V~ 2 independent FRED in 1 package Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour ● ● ● ● High reliability circuit operation Low voltage peaks for reduced protection circuits Low noise switching Low losses Operating at lower temperature or space saving by reduced cooling 009 VRSM IFAVM = 2x 60 A VRRM = 1000 V trr = 35 ns 1-2 DSEI 2x 61, 1000 V Fig. 1 Forward current versus voltage drop. Fig. 2 Recovery charge versus -diF/dt. Fig. 3 Peak reverse current versus -diF/dt. Fig. 4 Dynamic parameters versus junction temperature. Fig. 5 Recovery time versus -diF/dt. Fig. 6 Peak forward voltage versus diF/dt. Dimensions Fig. 7 Transient thermal impedance junction to case. © 2000 IXYS All rights reserved miniBLOC SOT-227 B M4 screws (4x) supplied Dim. Millimeter Min. Max. Inches Min. Max. A B 31.50 7.80 31.88 8.20 1.240 0.307 1.255 0.323 C D 4.09 4.09 4.29 4.29 0.161 0.161 0.169 0.169 E F 4.09 14.91 4.29 15.11 0.161 0.587 0.169 0.595 G H 30.12 37.80 30.30 38.20 1.186 1.489 1.193 1.505 J K 11.68 8.92 12.22 9.60 0.460 0.351 0.481 0.378 L M 0.76 12.60 0.84 12.85 0.030 0.496 0.033 0.506 N O 25.15 1.98 25.42 2.13 0.990 0.078 1.001 0.084 P Q 4.95 26.54 5.97 26.90 0.195 1.045 0.235 1.059 R S 3.94 4.72 4.42 4.85 0.155 0.186 0.174 0.191 T U 24.59 -0.05 25.07 0.1 0.968 -0.002 0.987 0.004 V W 3.30 0.780 4.57 0.830 0.130 19.81 0.180 21.08 2-2