DSEI 2x 30 DSEI 2x 31 Fast Recovery Epitaxial Diode (FRED) VRRM V V 440 640 400 600 miniBLOC, SOT-227 B E72873 Type DSEI 2x 30-04C DSEI 2x 31-04C DSEI 2x 30-06C DSEI 2x 31-06C DSEI 2x 30 DSEI 2x 31 Symbol Test Conditions Maximum Ratings (per diode) IFRMS IFAVM ¬ IFRM TVJ = TVJM TC = 85°C; rectangular, d = 0.5 tP < 10 µs; rep. rating, pulse width limited by TVJM 70 30 375 A A A IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 300 320 A A TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 260 280 A A TVJ = 45°C 450 420 A2s A2s 340 320 2 As A2s -40...+150 150 -40...+150 °C °C °C 100 W 2500 V~ Features l l l I2t t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ TVJM Tstg Ptot TC = 25°C VISOL 50/60 Hz, RMS IISOL ≤ 1 mA Md l l l l Applications l l l l Mounting torque Terminal connection torque (M4) 1.5/13 1.5/13 Weight 30 Nm/lb.in. Nm/lb.in. g Symbol Test Conditions IR TVJ = 25°C TVJ = 25°C TVJ = 125°C VR = VRRM VR = 0.8 • VRRM VR = 0.8 • VRRM 100 50 7 µA µA mA VF IF = 30 A; TVJ = 150°C TVJ = 25°C 1.4 1.6 V V VT0 rT For power-loss calculations only TVJ = TVJM 1.01 7.1 V mΩ Characteristic Values (per diode) typ. max. 1.25 K/W K/W RthJC RthCK l l l l trr IF = 1 A; -di/dt = 100 A/µs; VR = 30 V; TVJ = 25°C 35 50 ns IRM VR = 350 V; IF = 30 A; -diF/dt = 240 A/µs L ≤ 0.05 µH; TVJ = 100°C 10 11 A ¬ IFAVM rating includes reverse blocking losses at TVJM, VR = 0.8 VRRM, duty cycle d = 0.5 Data according to IEC 60747 IXYS reserves the right to change limits, test conditions and dimensions Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages l 0.05 © 2000 IXYS All rights reserved l International standard package miniBLOC (ISOTOP compatible) Isolation voltage 2500 V~ 2 independent FRED in 1 package Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour l l l l High reliability circuit operation Low voltage peaks for reduced protection circuits Low noise switching Low losses Operating at lower temperature or space saving by reduced cooling 009 VRSM IFAVM = 2x 30 A VRRM = 400/600 V = 35 ns trr D5 - 41 DSEI 2x 30, 400/600 V DSEI 2x 31, 400/600 V Fig. 1 Forward current versus voltage drop. Fig. 2 Recovery charge versus -diF/dt. Fig. 3 Peak reverse current versus -diF/dt. Fig. 4 Dynamic parameters versus junction temperature. Fig. 5 Recovery time versus -diF/dt. Fig. 6 Peak forward voltage versus diF/dt. Dimensions Fig. 7 Transient thermal impedance junction to case. D5 - 42 miniBLOC SOT-227 B M4 screws (4x) supplied Dim. Millimeter Min. Max. Inches Min. Max. A B 31.50 7.80 31.88 8.20 1.240 0.307 1.255 0.323 C D 4.09 4.09 4.29 4.29 0.161 0.161 0.169 0.169 E F 4.09 14.91 4.29 15.11 0.161 0.587 0.169 0.595 G H 30.12 37.80 30.30 38.20 1.186 1.489 1.193 1.505 J K 11.68 8.92 12.22 9.60 0.460 0.351 0.481 0.378 L M 0.76 12.60 0.84 12.85 0.030 0.496 0.033 0.506 N O 25.15 1.98 25.42 2.13 0.990 0.078 1.001 0.084 P Q 4.95 26.54 5.97 26.90 0.195 1.045 0.235 1.059 R S 3.94 4.72 4.42 4.85 0.155 0.186 0.174 0.191 T U 24.59 -0.05 25.07 0.1 0.968 -0.002 0.987 0.004 V W 3.30 0.780 4.57 0.830 0.130 19.81 0.180 21.08 © 2000 IXYS All rights reserved DSEI 2x 30 DSEI 2x 31 Fast Recovery Epitaxial Diode (FRED) VRRM V V 1000 1000 miniBLOC, SOT-227 B E72873 Type DSEI 2x 30-10B DSEI 2x 31-10B DSEI 2x30 DSEI 2x31 Symbol Test Conditions Maximum Ratings (per diode) IFRMS IFAVM ¬ IFRM TVJ = TVJM TC = 50°C; rectangular, d = 0.5 tP < 10 µs; rep. rating, pulse width limited by TVJM 70 30 375 A A A IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 210 A A TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 185 195 A A TVJ = 45°C 200 180 A2s A2s 170 160 2 As A2s -40...+150 150 -40...+150 °C °C °C 100 W 2500 V~ Features l l l I2t t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ TVJM Tstg Ptot TC = 25°C VISOL 50/60 Hz, RMS IISOL ≤ 1 mA Md l l l l Applications l l l l Mounting torque Terminal connection torque (M4) 1.5/13 1.5/13 Weight 30 Nm/lb.in. Nm/lb.in. g Symbol Test Conditions IR TVJ = 25°C TVJ = 25°C TVJ = 125°C VR = VRRM VR = 0.8 • VRRM VR = 0.8 • VRRM 750 250 7 µA µA mA VF IF = 30 A; TVJ = 150°C TVJ = 25°C 2 2.4 V V VT0 rT For power-loss calculations only TVJ = TVJM 1.5 12.5 V mΩ Characteristic Values (per diode) typ. max. 1.25 K/W K/W RthJC RthCK l l l l trr IF = 1 A; -di/dt = 100 A/µs; VR = 30 V; TVJ = 25°C 35 50 ns IRM VR = 540 V; IF = 30 A; -diF/dt = 240 A/µs L ≤ 0.05 µH; TVJ = 100°C 16 18 A ¬ IFAVM rating includes reverse blocking losses at TVJM, VR = 0.8 VRRM, duty cycle d = 0.5 Data according to IEC 60747 IXYS reserves the right to change limits, test conditions and dimensions Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages l 0.05 © 2000 IXYS All rights reserved l International standard package miniBLOC (ISOTOP compatible) Isolation voltage 2500 V~ 2 independent FRED in 1 package Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour l l l l High reliability circuit operation Low voltage peaks for reduced protection circuits Low noise switching Low losses Operating at lower temperature or space saving by reduced cooling 009 VRSM IFAVM = 2x 30 A VRRM = 1000 V = 35 ns trr D5 - 43 DSEI 2x 30, 1000 V DSEI 2x 31, 1000 V Fig. 1 Forward current versus voltage drop. Fig. 2 Recovery charge versus -diF/dt. Fig. 3 Peak reverse current versus -diF/dt. Fig. 4 Dynamic parameters versus junction temperature. Fig. 5 Recovery time versus -diF/dt. Fig. 6 Peak forward voltage versus diF/dt. Dimensions Fig. 7 Transient thermal impedance junction to case. D5 - 44 miniBLOC SOT-227 B M4 screws (4x) supplied Dim. Millimeter Min. Max. Inches Min. Max. A B 31.50 7.80 31.88 8.20 1.240 0.307 1.255 0.323 C D 4.09 4.09 4.29 4.29 0.161 0.161 0.169 0.169 E F 4.09 14.91 4.29 15.11 0.161 0.587 0.169 0.595 G H 30.12 37.80 30.30 38.20 1.186 1.489 1.193 1.505 J K 11.68 8.92 12.22 9.60 0.460 0.351 0.481 0.378 L M 0.76 12.60 0.84 12.85 0.030 0.496 0.033 0.506 N O 25.15 1.98 25.42 2.13 0.990 0.078 1.001 0.084 P Q 4.95 26.54 5.97 26.90 0.195 1.045 0.235 1.059 R S 3.94 4.72 4.42 4.85 0.155 0.186 0.174 0.191 T U 24.59 -0.05 25.07 0.1 0.968 -0.002 0.987 0.004 V W 3.30 0.780 4.57 0.830 0.130 19.81 0.180 21.08 © 2000 IXYS All rights reserved DSEI 2x 30 DSEI 2x 31 Fast Recovery Epitaxial Diode (FRED) VRRM V V 1200 1200 miniBLOC, SOT-227 B E72873 Type DSEI 2x 30-12B DSEI 2x 31-12B DSEI 2x 30 DSEI 2x 31 Symbol Test Conditions Maximum Ratings (per diode) IFRMS IFAVM ¬ IFRM TVJ = TVJM TC = 50°C; rectangular, d = 0.5 tP < 10 µs; rep. rating, pulse width limited by TVJM 70 28 375 A A A IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 210 A A TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 185 195 A A TVJ = 45°C 200 180 A2s A2s 170 160 2 As A2s -40...+150 150 -40...+150 °C °C °C 100 W 2500 V~ Features l l l I2t t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ TVJM Tstg Ptot TC = 25°C VISOL 50/60 Hz, RMS IISOL ≤ 1 mA Md l l l l Applications l l l l Mounting torque Terminal connection torque (M4) 1.5/13 1.5/13 Weight 30 Nm/lb.in. Nm/lb.in. g Symbol Test Conditions IR TVJ = 25°C TVJ = 25°C TVJ = 125°C VR = VRRM VR = 0.8 • VRRM VR = 0.8 • VRRM 0.75 0.25 7 mA mA mA VF IF = 30 A; TVJ = 150°C TVJ = 25°C 2.2 2.55 V V VT0 rT For power-loss calculations only TVJ = TVJM 1.65 18.2 V mΩ Characteristic Values (per diode) typ. max. 1.25 K/W K/W RthJC RthCK l l l l trr IF = 1 A; -di/dt = 100 A/µs; VR = 30 V; TVJ = 25°C 40 60 ns IRM VR = 540 V; IF = 30 A; -diF/dt = 240 A/µs L ≤ 0.05 µH; TVJ = 100°C 16 18 A ¬ IFAVM rating includes reverse blocking losses at TVJM, VR = 0.8 VRRM, duty cycle d = 0.5 Data according to IEC 60747 IXYS reserves the right to change limits, test conditions and dimensions Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages l 0.05 © 2000 IXYS All rights reserved l International standard package miniBLOC (ISOTOP compatible) Isolation voltage 2500 V~ 2 independent FRED in 1 package Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour l l l l High reliability circuit operation Low voltage peaks for reduced protection circuits Low noise switching Low losses Operating at lower temperature or space saving by reduced cooling 009 VRSM IFAVM = 2x 28 A VRRM = 1200 V = 40 ns trr D5 - 45 DSEI 2x 30, 1200 V DSEI 2x 31, 1200 V IF 70 A 60 6 TVJ=100°C µC V = 540V R 5 50 IF=30A IF=60A IF=30A IF=15A Qr TVJ=25°C TVJ=100°C TVJ=150°C 40 30 3 A 40 30 typ. max. 1 0 1 2 VF 3 V 0 4 Fig. 1 Forward current versus voltage drop. 10 typ. 1 10 -diF/dt 0 100 A/µs 1000 0.8 IRM trr 0.8 0.6 IF=30A IF=60A IF=30A IF=15A max. 0.6 40 800 30 600 20 400 VFR tfr 120 °C 160 Fig. 4 Dynamic parameters versus junction temperature. 0.0 10 typ. 0.2 TJ 1000 tfr 0.2 80 ns 50 VFR 0.4 40 1200 V 0.4 QR 0 0 200 400 A/µs 600 0 TVJ=125°C IF=30A 0 0 diF/dt Fig. 5 Recovery time versus -diF/dt. Fig. 7 Transient thermal impedance junction to case. 200 400 A/µs 600 200 -diF/dt Fig. 6 Peak forward voltage versus diF/dt. Dimensions D5 - 46 400 A/µs 600 60 TVJ=100°C VR=540V µs 1.0 200 Fig. 3 Peak reverse current versus -diF/dt. 1.0 1.2 0 -diF/dt Fig. 2 Recovery charge versus -diF/dt. 1.4 0.0 max. IF=30A IF=60A IF=30A IF=15A IRM 20 10 Kf TVJ=100°C VR= 540V 2 20 0 4 50 miniBLOC SOT-227 B M4 screws (4x) supplied Dim. Millimeter Min. Max. Inches Min. Max. A B 31.50 7.80 31.88 8.20 1.240 0.307 1.255 0.323 C D 4.09 4.09 4.29 4.29 0.161 0.161 0.169 0.169 E F 4.09 14.91 4.29 15.11 0.161 0.587 0.169 0.595 G H 30.12 37.80 30.30 38.20 1.186 1.489 1.193 1.505 J K 11.68 8.92 12.22 9.60 0.460 0.351 0.481 0.378 L M 0.76 12.60 0.84 12.85 0.030 0.496 0.033 0.506 N O 25.15 1.98 25.42 2.13 0.990 0.078 1.001 0.084 P Q 4.95 26.54 5.97 26.90 0.195 1.045 0.235 1.059 R S 3.94 4.72 4.42 4.85 0.155 0.186 0.174 0.191 T U 24.59 -0.05 25.07 0.1 0.968 -0.002 0.987 0.004 V W 3.30 0.780 4.57 0.830 0.130 19.81 0.180 21.08 © 2000 IXYS All rights reserved