APTGL90DH120T3G Asymmetrical - Bridge Trench + Field Stop IGBT4 Power module 13 Application • Welding converters • Switched Mode Power Supplies • Uninterruptible Power Supplies 14 Q1 CR1 VCES = 1200V IC = 90A @ Tc = 80°C CR3 18 22 7 23 8 Features • Trench + Field Stop IGBT 4 Technology - Low voltage drop - Low leakage current - Low switching losses - Soft recovery parallel diodes - Low diode VF - Low leakage current - RBSOA and SCSOA rated - Symmetrical design • Kelvin emitter for easy drive • Very low stray inductance • High level of integration • Internal thermistor for temperature monitoring 19 Q4 CR2 CR4 4 3 29 30 31 15 32 16 R1 28 27 26 25 23 22 20 19 18 29 16 30 15 31 14 32 13 2 3 4 7 8 10 11 12 All multiple inputs and outputs must be shorted together Example: 13/14 ; 29/30 ; 22/23 … Benefits • Outstanding performance at high frequency operation • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Solderable terminals both for power and signal for easy PCB mounting • Low profile • Easy paralleling due to positive TC of VCEsat • Each leg can be easily paralleled to achieve a phase leg of twice the current capability • RoHS compliant Absolute maximum ratings ICM VGE PD RBSOA Continuous Collector Current Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation Reverse Bias Safe Operating Area Tc = 25°C Tc = 80°C Tc = 25°C Tc = 25°C Tj = 150°C Max ratings 1200 110 90 150 ±20 385 150A @ 1150V Unit V May, 2009 IC Parameter Collector - Emitter Breakdown Voltage A V W These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1-5 APTGL90DH120T3G – Rev 0 Symbol VCES APTGL90DH120T3G All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic ICES Zero Gate Voltage Collector Current VCE(sat) Collector Emitter saturation Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions Min VGE = 0V, VCE = 1200V Tj = 25°C VGE = 15V IC = 75A Tj = 150°C VGE = VCE , IC = 3mA VGE = 20V, VCE = 0V Typ 5.0 1.8 2.2 5.8 Min Typ Max Unit 250 2.2 µA 6.5 600 V nA Max Unit V Dynamic Characteristics Symbol Characteristic Cies Coes Cres Input Capacitance Output Capacitance Reverse Transfer Capacitance QG Gate charge Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Eon Turn-on Switching Energy Eoff Turn-off Switching Energy Isc Short Circuit data Test Conditions VGE = 0V VCE = 25V f = 1MHz VGE= ±15V ; VCE=600V IC=75A Inductive Switching (25°C) VGE = ±15V VBus = 600V IC = 75A RG = 2.2Ω Inductive Switching (150°C) VGE = ±15V VBus = 600V IC = 75A RG = 2.2Ω TJ = 25°C VGE = ±15V VBus = 600V TJ = 150°C IC = 75A TJ = 25°C RG = 2.2Ω TJ = 150°C VGE ≤15V ; VBus = 900V tp ≤10µs ; Tj = 150°C 4.4 0.29 0.24 nF 0.57 µC 130 20 300 ns 45 150 35 ns 350 80 3.4 8.5 4.2 7.2 mJ 300 A mJ Reverse diode ratings and characteristics Test Conditions Min 1200 Maximum Peak Repetitive Reverse Voltage Maximum Reverse Leakage Current DC Forward Current VF Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge Er Reverse Recovery Energy VR=1200V IF = 75A VGE = 0V IF = 75A VR = 600V di/dt =1900A/µs Typ Tj = 25°C Tc = 80°C Tj = 25°C Tj = 150°C 90 1.7 1.65 Tj = 25°C 155 Tj = 150°C Tj = 25°C 300 7.3 Tj = 150°C Tj = 25°C Tj = 150°C 15.2 2.6 5.5 www.microsemi.com Max 250 2.2 Unit V µA A V May, 2009 Characteristic ns µC mJ 2-5 APTGL90DH120T3G – Rev 0 Symbol VRRM IRM IF APTGL90DH120T3G Thermal and package characteristics Symbol Characteristic RthJC VISOL TJ TSTG TC Torque Wt Min Junction to Case Thermal Resistance RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight Typ IGBT Diode To heatsink M4 2500 -40 -40 -40 2.5 Max 0.39 0.62 Unit °C/W V 175 125 100 4.7 110 °C N.m g Temperature sensor NTC (see application note APT0406 on www.microsemi.com for more information). Symbol R25 ∆R25/R25 B25/85 ∆B/B Characteristic Resistance @ 25°C Min T25 = 298.15 K TC=100°C RT = R25 Typ 50 5 3952 4 Max Unit kΩ % K % T: Thermistor temperature ⎡ ⎛ 1 1 ⎞⎤ RT: Thermistor value at T exp ⎢ B25 / 85 ⎜⎜ − ⎟⎟⎥ ⎝ T25 T ⎠⎦ ⎣ 12 See application note 1901 - Mounting Instructions for SP3 Power Modules on www.microsemi.com www.microsemi.com 3-5 APTGL90DH120T3G – Rev 0 28 17 1 May, 2009 SP3 Package outline (dimensions in mm) APTGL90DH120T3G Typical Performance Curve Output Characteristics (VGE=15V) 150 Output Characteristics 150 TJ = 150°C 125 125 VGE=19V 100 TJ=150°C IC (A) IC (A) TJ=25°C 100 75 50 50 25 25 0 VGE=9V 0 0 1 2 VCE (V) 3 4 0 Transfert Characteristics 150 20 E (mJ) 75 2 VCE (V) 3 VCE = 600V VGE = 15V RG = 2.2 Ω TJ = 150°C 25 100 1 4 Energy losses vs Collector Current 30 TJ=25°C 125 IC (A) VGE=15V 75 Eon 15 Eoff 10 50 Er TJ=150°C 25 5 0 0 5 6 7 8 9 10 11 12 Eon 0 13 25 50 75 100 125 150 IC (A) VGE (V) Switching Energy Losses vs Gate Resistance Reverse Bias Safe Operating Area 20 160 Eon VCE = 600V VGE =15V IC = 75A TJ = 150°C 12 120 IC (A) E (mJ) 16 Eoff 8 Er 80 VGE=15V TJ=150°C RG=2.2 Ω 40 4 0 0 0 5 10 15 20 Gate Resistance (ohms) 25 0 300 600 900 VCE (V) 1200 1500 maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.2 IGBT 0.7 May, 2009 0.3 0.9 0.5 0.3 0.1 0.1 Single Pulse 0.05 0 0.00001 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) www.microsemi.com 4-5 APTGL90DH120T3G – Rev 0 Thermal Impedance (°C/W) 0.4 APTGL90DH120T3G Forward Characteristic of diode 150 VCE=600V D=50% RG=2.2 Ω TJ=150°C Tc=75°C 80 60 40 IF, Forward Current (A) Fmax, Operating Frequency (kHz) Operating Frequency vs Collector Current 100 ZCS 20 Hard switching ZVS 100 75 50 40 TJ=150°C 25 0 0 20 TJ=25°C 125 60 80 100 0 120 0.5 1 1.5 2 2.5 VF, Anode to Cathode Voltage (V) IC (A) maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (°C/W) 0.7 0.6 0.9 0.5 0.7 0.4 Diode 0.5 0.3 0.2 0.1 0.3 0.1 0.05 0 0.00001 Single Pulse 0.0001 0.001 0.01 0.1 1 10 Microsemi reserves the right to change, without notice, the specifications and information contained herein Microsemi's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743 7,352,045 5,283,201 5,801,417 5,648,283 7,196,634 6,664,594 7,157,886 6,939,743 7,342,262 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. www.microsemi.com 5-5 APTGL90DH120T3G – Rev 0 May, 2009 Rectangular Pulse Duration in Seconds